|
Starview frequency range
|
|
AfterDawn Addict
|
8. August 2008 @ 11:31 |
Link to this message
|
Originally posted by 3rizlas:
thanks Des (& gman)it says there the freq is 458.000
unfortunately that is not bringing up any channels for me.
just to make sure it is not me, i am going.....
menu > installation > manual scan > down frequency = 458.000 MHz > OK
I am leaving everything else the same
symbol rate = 6887 ksps
constellation = 64 QAM
network scan = disable
am I doing something wrong?
Have you tried a manual scan on that frequency. Menu, Installation OK and down to manual Scan OK and Enter the frequency in Down Frequency and press OK (do not enable)it will bring in all the channels on that frequency, they will probably appear at the end of your channel listings. It will be quicker to do it from one of the affected channels as the frequency will already appear in Down Frequency.
This message has been edited since posting. Last time this message was edited on 8. August 2008 @ 11:32
|
|
Advertisement
|
|
|
|
Junior Member
|
8. August 2008 @ 11:42 |
Link to this message
|
|
sorry Des, I must be missing something, that is that what I have done.
|
AfterDawn Addict
|
8. August 2008 @ 11:56 |
Link to this message
|
Originally posted by 3rizlas:
sorry Des, I must be missing something, that is that what I have done.
try it again this time enable network scan,allright des
|
Junior Member
|
8. August 2008 @ 12:12 |
Link to this message
|
|
thanks for trying Des, but still no joy, any other ideas?
|
Junior Member
|
8. August 2008 @ 13:14 |
Link to this message
|
|
anyone up for the challenge?
|
AfterDawn Addict
|
8. August 2008 @ 13:32 |
Link to this message
|
|
as above ^
|
|
Tin_Socks
Newbie
|
17. December 2008 @ 04:17 |
Link to this message
|
|
can anyone link me to a list of channel frequencys for NTL in the midlands?
thanks???
|
Junior Member
|
17. December 2008 @ 05:05 |
Link to this message
|
Hi all, I have been flashing a lot of eurovox's for friends and familly etc but a mate asked if I could do his thebox pvr, I flashed it no problem with 081208fix but when trying to scan I can't get any signal or quality both stay at 0% and so no channels. I used the auto scan on 1952. Am I missing somthing simple or may this box be faulty? any sugestions would be apreciated.
|
|
claudiat
Newbie
|
17. December 2008 @ 10:45 |
Link to this message
|
|
my channels arent working all i have is rte one and about 3 other random channels..
plz help is you can...it's a ROI box.
|
|
eso1967
Junior Member
|
17. December 2008 @ 16:29 |
Link to this message
|
Originally posted by claudiat:
my channels arent working all i have is rte one and about 3 other random channels..
plz help is you can...it's a ROI box.
do a rescan mate
eddie
|
AfterDawn Addict
|
17. December 2008 @ 16:34 |
Link to this message
|
Originally posted by claudiat:
my channels arent working all i have is rte one and about 3 other random channels..
plz help is you can...it's a ROI box.
you need to read through the forum as this has happened lots of people,first try leave it on either sly movies indie or sly two,some say mtv 2 worked for them.
|
|
fergusrb
Suspended permanently
|
22. December 2008 @ 04:19 |
Link to this message
|
Wanted
Starview 2 TheBox
Starview 3 SuperBox
The super box must have only 1 input and 1 rf out on the back only
Must be in the dublin area and collection for today or tomorrow
Please pm me with details of price don't want new ones second hand will do
Only for test purposes only thanks
To send a pm click on the small head to the right of my post
|
|
Cami33
Newbie
|
22. December 2008 @ 08:17 |
Link to this message
|
Originally posted by Tin_Socks:
can anyone link me to a list of channel frequencys for NTL in the midlands?
thanks???
In same situation, located Laois, any joy with a link?
Thanks
|
|
blademcl
Suspended due to non-functional email address
|
18. January 2009 @ 10:15 |
Link to this message
|
hi.can anyone help have a clone starview box, not getting any of the scrambled channels, running the auto update software, was wondering if there is an update out yet???
|
|
malci
Suspended due to non-functional email address
|
18. January 2009 @ 11:31 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 18. January 2009 @ 11:31
|
|
sadfart
Junior Member
|
18. January 2009 @ 15:26 |
Link to this message
|
|
I know i have posted the question below on a couple of the forums within afterdawn but as yet no response sorry if i am not showing the appropriate etiquitte just desperate for help.
my *view is a clone and i am receiving all the channels, setanta sports is now on bics 411 but i have no sound with it, when i watch a match i have to put a radio on for commentary, her in doors is cracking up any ideas how to resolve the problem?
regards
sadfart
Ps Just tried an automatic scan and there was no change, i have a splitter on the cable would it make a difference if i disconnected the splitter?
any help mucho appreciated
|
Senior Member
|
18. January 2009 @ 15:29 |
Link to this message
|
|
try disconnecting the splitter and see, also check your scart cable if there anyway dodgy you will get crap picture or problems with sound :)
|
|
Shaazaam
Newbie
|
19. January 2009 @ 03:29 |
Link to this message
|
Originally posted by sadfart:
I know i have posted the question below on a couple of the forums within afterdawn but as yet no response sorry if i am not showing the appropriate etiquitte just desperate for help.
my *view is a clone and i am receiving all the channels, setanta sports is now on bics 411 but i have no sound with it, when i watch a match i have to put a radio on for commentary, her in doors is cracking up any ideas how to resolve the problem?
regards
sadfart
Ps Just tried an automatic scan and there was no change, i have a splitter on the cable would it make a difference if i disconnected the splitter?
any help mucho appreciated
Delete the channel and try doing a manual scan at the lowest frequency. Mine is 291.000, obviously dunno where ye are so couldn't confirm this is your lowest frequency but I know the frequency range's are posted somewhere on the site for differing area's.
It should come in at the end of your channel listings on the starview box.
|
|
sadfart
Junior Member
|
19. January 2009 @ 13:41 |
Link to this message
|
hi folks,
tried auto scan without splitter same result evrything tickety boo with allother stations including picture and sound but setanta 1 still appearing on bics 11 good picture but still no sound.
i dont know how to do manual scan the information on bics 11 is 283000khz 64qam 6887ksps not sure what all that means but thought i would include it just in case it helps resolve the problem.
regards sadfart
|
|
malci
Suspended due to non-functional email address
|
19. January 2009 @ 14:00 |
Link to this message
|
Originally posted by sadfart:
hi folks,
tried auto scan without splitter same result evrything tickety boo with allother stations including picture and sound but setanta 1 still appearing on bics 11 good picture but still no sound.
i dont know how to do manual scan the information on bics 11 is 283000khz 64qam 6887ksps not sure what all that means but thought i would include it just in case it helps resolve the problem.
regards sadfart
If you want to try a Manual Scan do the following, - From the Affected Channel (Setanta) Press Menu, OK on Installation, Go down to Manual Scan and press OK again, and you will see the frequency you have posted 283.000Mhz appear in Down Frequency, just press OK and it will scan on that one frequency, when finished it will show you what was found. Wait for saving and then exit out to TV, you will most likely find the channels found at the end of your listings, just re-order in Channel Edit and delete the non working one/s. (It may solve your problem, no harm in trying, good luck)
This message has been edited since posting. Last time this message was edited on 19. January 2009 @ 14:01
|
|
sadfart
Junior Member
|
19. January 2009 @ 14:26 |
Link to this message
|
malci,
thanks for your speedy response who says there are no more heroes just followed your very simple instructions and hey presto we have sound.
keep the good work up
sadfart
|
|
malci
Suspended due to non-functional email address
|
19. January 2009 @ 16:31 |
Link to this message
|
Originally posted by sadfart:
malci,
thanks for your speedy response who says there are no more heroes just followed your very simple instructions and hey presto we have sound.
keep the good work up
sadfart
Pleased for you, and the wife as well of course, no more mental!! lol, good luck and take care. :)
|
|
interat
Junior Member
1 product review
|
12. February 2009 @ 17:16 |
Link to this message
|
Originally posted by Shaazaam:
Hi
Does anyone know the frequency range for Celtic TV. Mine hangs anytime I press the channel.
I've tried manually retuning it using the frequency range listed in the following URL, 683.000:
[url=http://forums.afterdawn.com/thread_view.cfm/531363][/url]
but no joy.
I had the same problem but got it sorted, could not get this station whatever i tried, phone my friend who had the same box and his station was fine, he lives about 3 miles away, I took my box to his house, re scanned on his cable and low and behold it came back and its still there today after 5 months, try it, it worked for me.
Any help much appreciated.
Cheers
|
|
interat
Junior Member
1 product review
|
12. February 2009 @ 17:22 |
Link to this message
|
Originally posted by blademcl:
hi.can anyone help have a clone starview box, not getting any of the scrambled channels, running the auto update software, was wondering if there is an update out yet???
update for clone starview 1 out now.
|
|
Advertisement
|
|
|
|
malci
Suspended due to non-functional email address
|
12. February 2009 @ 17:32 |
Link to this message
|
|
Yep it sure is, and it was posted directly underneath the OPs request within the hour.
|
