|
StarView 3 - the BOX Super - 0% Update
|
|
|
Con1
Junior Member
|
9. November 2008 @ 16:25 |
Link to this message
|
Hi guys, hoping you can help. I have a starview 3, box super with API version 8.0 (June 2008) on the box. its picking up 172 channels, i have turned EMU to on and exit to premier channel and i am getting a "data s being updated 0%" but it does not move off the 0% - seems t0 be stuck on that, any thoughts?
Thanks
In Dublin on N*L - cheers
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
9. November 2008 @ 16:28 |
Link to this message
|
|
try discovery channel.
|
|
Con1
Junior Member
|
9. November 2008 @ 16:38 |
Link to this message
|
|
Trying that now - that worked, the 0% never went to 100% but the its works..thanks, owe you a pint!
Do I need to do anything else or is that it -i.e. what happens when I turn off tv/box at the socket?
Thanks
|
|
Con1
Junior Member
|
9. November 2008 @ 16:57 |
Link to this message
|
|
Turned it off and back on and all good, thanks for the help...
Quick Q - should I be turning it on/off at the socket or to hold the channels do I need to keep it on standby all the time?
|
|
Con1
Junior Member
|
9. November 2008 @ 17:04 |
Link to this message
|
|
Cactikid, just checked and notice that of the 172 channels only 130 came thru so no RTE, Tv 3 etc .....re-scan or what do you think?
|
Senior Member
|
9. November 2008 @ 17:10 |
Link to this message
|
I'm on n** dublin and i only get about 139 channels, you could try a manual scan on the frequency for those channels your missing which on mine is 339.000, might bring them back.
Also as I see cactikid has mentioned I flashed mine to sw 7.09 it had got 8.00 on before flash.
This message has been edited since posting. Last time this message was edited on 9. November 2008 @ 17:13
|
AfterDawn Addict
|
9. November 2008 @ 17:10 |
Link to this message
|
|
normally u use v.7.09 for irl.so if u factory reset then reflash with 7.09 and emu to on.
do not scan thru splitters as u will lose channels.
|
|
Con1
Junior Member
|
9. November 2008 @ 18:02 |
Link to this message
|
Thanks...a pal of mine is also in Dub and using api 8.0 and the box came with 8.0API already loaded on it - would it be worth re-scanning or should I definately be using 7.09???
Getting 172 channels with the scan (incl radio) but only 130 coming up.....?
So question is API 8.0 or API 7.09?
|
Senior Member
|
9. November 2008 @ 18:05 |
Link to this message
|
i changed mine to 7.09 cause my box kept rebooting, but a friend of mine and a few others i know are still using 8.00 and no probs so i think its up to yourself, mine also came with 8.00 on it.
maybe try the scan on the frequency sure you can always reflash later.
This message has been edited since posting. Last time this message was edited on 9. November 2008 @ 18:06
|
|
Con1
Junior Member
|
9. November 2008 @ 18:10 |
Link to this message
|
|
Thanks anto, good advice :)
Will give it another scan tomorrow evening and also will try the manual scan to see if that works.otherwise will go for the 7.09 version...
thanks for the help again.
C
|
Senior Member
|
9. November 2008 @ 18:14 |
Link to this message
|
manual scan on 339.000 for those stations your missing, hope it works and let us know how you get on:)
|
|
Con1
Junior Member
|
10. November 2008 @ 05:50 |
Link to this message
|
|
hi guys, did a scan on 339 but nothing came up, still missing the rte, network 2, tv3 etc....
Do I need to make any other changes or do you recommend I flash my box from 8.0 to 7.09?
Thanks
|
AfterDawn Addict
|
10. November 2008 @ 05:58 |
Link to this message
|
|
manual scan on 339.500 & you should pick them up.
|
|
Con1
Junior Member
|
10. November 2008 @ 06:02 |
Link to this message
|
Thanks Noel, will do that later this evening. There are 4/5 options in the manual scan menu, do I only need to change frequency or do I also need to adjust other settings?
Thanks
C
|
AfterDawn Addict
|
10. November 2008 @ 06:10 |
Link to this message
|
Originally posted by Con1:
Thanks Noel, will do that later this evening. There are 4/5 options in the manual scan menu, do I only need to change frequency or do I also need to adjust other settings?
Thanks
C
When you go into manual scan, at the top you`ll see the down freq.
input 339500. symbol rate should be 6887Ksps.
Go down to network scan & switch from disable to enable > press ok & it should then scan & pick the channels up.
Make sure you`re scanning on n*l.
This message has been edited since posting. Last time this message was edited on 10. November 2008 @ 06:14
|
|
DJTAZZY
Newbie
|
10. November 2008 @ 10:23 |
Link to this message
|
|
Hi, just got my new starview3 and having slight teething probs.....in scotland on virgin......it scans channels using the tw choice but cant get any channels subscription etc as it sits with the 0% data uploading an nothin happens.....any ideas guys.
Is there a setting to choose virgin rather than tw or ntl(which doesnt work)????
Any help is greatfully appreciated
|
AfterDawn Addict
|
10. November 2008 @ 10:43 |
Link to this message
|
Originally posted by DJTAZZY:
Hi, just got my new starview3 and having slight teething probs.....in scotland on virgin......it scans channels using the tw choice but cant get any channels subscription etc as it sits with the 0% data uploading an nothin happens.....any ideas guys.
Is there a setting to choose virgin rather than tw or ntl(which doesnt work)????
Any help is greatfully appreciated
Press menu > 1570 & see if you can access the cas menu. If so, turn the "key emu" on.
Go to "set default key" press ok & exit to s*y sports & let it update.
|
|
DJTAZZY
Newbie
|
10. November 2008 @ 10:52 |
Link to this message
|
Hi Noelyf,
I have done this several times but still sits with 0% update. I have checked firmware etc its 7.09 so its uptodate....just puzzled as to see if there is a prob of using the TW channel search as there is no virgin in the choices.
|
AfterDawn Addict
|
10. November 2008 @ 10:57 |
Link to this message
|
Originally posted by DJTAZZY:
Hi Noelyf,
I have done this several times but still sits with 0% update. I have checked firmware etc its 7.09 so its uptodate....just puzzled as to see if there is a prob of using the TW channel search as there is no virgin in the choices.
Try a scan on a different provider from the main feed (no splitters etc) then set default key again.
|
|
DJTAZZY
Newbie
|
10. November 2008 @ 11:03 |
Link to this message
|
|
only prob i have there is that i need splitter as broadband on virgin aswell
|
|
DJTAZZY
Newbie
|
10. November 2008 @ 11:07 |
Link to this message
|
|
HAHA
Got it......switched mains button off at rear and back on again and it started to update......ok now all is cool.
Thanks for your help Noelyf, it was greatfully appreciated.
|
AfterDawn Addict
|
10. November 2008 @ 11:11 |
Link to this message
|
Originally posted by DJTAZZY:
only prob i have there is that i need splitter as broadband on virgin aswell
Ideally for the uk, you should be using the 8.00 & not the 7.09 as this is for Ireland.
Try this
Menu > 1570
Turn OFF Emu.
Exit to a TV channel, & wait till it says data being updated
Go back to the cas menu & set the default key first
Turn emu on
Exit back to channels & see if it updates.
|
AfterDawn Addict
|
10. November 2008 @ 11:12 |
Link to this message
|
Originally posted by DJTAZZY:
HAHA
Got it......switched mains button off at rear and back on again and it started to update......ok now all is cool.
Thanks for your help Noelyf, it was greatfully appreciated.
lol, you were too quick for me there :)
Glad you got it.
|
|
Con1
Junior Member
|
10. November 2008 @ 14:16 |
Link to this message
|
|
Hi guys, did a manual scan on 339.5 - It scanned through 18/19 and then stopped at 95% saying that it had found 183. when I exited I had 141 channels but some still say scrambled or bad channel?
Any ideas?
Thanks
Cian
|
|
Advertisement
|
|
|
|
Con1
Junior Member
|
10. November 2008 @ 15:59 |
Link to this message
|
Originally posted by Con1:
Hi guys, did a manual scan on 339.5 - It scanned through 18/19 and then stopped at 95% saying that it had found 183. when I exited I had 141 channels but some still say scrambled or bad channel?
Any ideas?
Thanks
Cian
Any help on this appreciated.....no luck on this end.....Thanks, Cian
|
