|
New ixtreme 1.5 Updates! IXTREME 1.5 RELEASED!
|
|
|
big_green
Junior Member
|
26. December 2008 @ 03:47 |
Link to this message
|
Originally posted by heraldsun:
OK..thanks for that
Sorry to hear you are having so much trouble.just a thought now i know you said drivers and .EXE weren't working for you,i'm just curious if mode B is on to cause comp freezing,i know it's auto but they have a tutorial on how to permanetly dis-able it or temp dis-able so i'm kind of wondering if there is a slight fault with the kit ?? I may be totally wrong.. but heres the tutorial on the F/W and dis-abling mode B
http://www.maximusgames.net/downloads/Ma...orManualv11.pdf
oopps i don't know if if i am allowed to link that...sorry...i'm sure it will be deleted if i'm not,it's only a tutorial
I'm using the CK3, which has a button to enable/disable ModeB, so that's not the problem. I had it working just fine, even managed to dump the key using JungleFlasher, and then it just spontaneously started crashing Windows whenever I turned it on (CK3). JungleFlasher worked fine except that it only supports the PortIO driver and that on my comp the prog window was horribly undersized and thus the buttons were unviewable. Thanks for the vote of sympathy though :P I managed to waste 2 days attempting various methods, when the simplest and most foolproof method for me ended up being DOS dump/flash.
- guessswho, I actually tried to install the drivers using the .dll, but I believe whenever I tried to point the hardware installed to that file it wouldn't recognize it as it said it wasn't a .ini file... I'm pretty sure I opened it, maybe I didn't because hardware installer only searches for .ini files and I never attempted to but I'm 95% sure I did try. Again, though, it's probably that I just had a bum version of the driver in the first place.
|
|
Advertisement
|
|
|
|
|
wld
Newbie
|
26. December 2008 @ 03:57 |
Link to this message
|
|
ok, im trying to get the key out of my liteon, but i want to solder a CK myself. since i cant find this scheme maybe someone can help me in the right direction..
On the otherhand: if i dont feel like soldering i would like to buy this:Xecuter CK3 Lite. Is that the right one?
And about the spear thing or Probe *LITEON NO SOLDER ADD ON*.. Whats the difference? Do I really need a probe with lights to see if im at the right place on the board?
Help would be really appreciated.
|
AfterDawn Addict
|
26. December 2008 @ 12:18 |
Link to this message
|
|
read through this thread, it has the answers
need jtag help? Xbox 360 console repair? PM me or chat |
|
Dindi304
Suspended due to non-functional email address
|
26. December 2008 @ 13:40 |
Link to this message
|
|
Has anyone put up a good vid tutorial on how to flash the lite on drive yet? I was rummaging throught youtube and found a few sloppily made vids but nothing worth following. So just figured id ask you guys if you've seen any.
|
|
aj123
Member
|
26. December 2008 @ 17:22 |
Link to this message
|
|
what tutorials are you guys following, the one that was posted in red or the ones in the link?
|
|
axel09
Junior Member
|
26. December 2008 @ 22:08 |
Link to this message
|
Thanks for all the nice firmware team jungle.Can one of the pros put out a good video,step by step everything. And I will buy the kit with your reference.
xbox fan
|
|
daboy85
Newbie
|
26. December 2008 @ 22:36 |
Link to this message
|
hey i tried to do my benq drive and now when i put in a disc it says play dvd and it give me an error to insert a x360 media, i did exactly as the tut said, and i dont know if its bricked or what i did another one with no problem please lend me a hand!!!! much apprichated!
|
|
aj123
Member
|
26. December 2008 @ 22:40 |
Link to this message
|
Originally posted by daboy85:
hey i tried to do my benq drive and now when i put in a disc it says play dvd and it give me an error to insert a x360 media, i did exactly as the tut said, and i dont know if its bricked or what i did another one with no problem please lend me a hand!!!! much apprichated!
usually when i get this problem its because of the game and not the 360, but if it is a problem with the drive, try flashing it again and make sure u get a verified notice when your done.
|
|
snowbb451
Junior Member
|
26. December 2008 @ 23:51 |
Link to this message
|
can i flash a 79 w/ an older firmware using the jungleflasher, or does it only support 1.5?
|
|
paynfull
Junior Member
|
27. December 2008 @ 00:59 |
Link to this message
|
Hey does 1.5 mean i can switch a lite on with a benq? And not worry about the identification string?
|
|
Dindi304
Suspended due to non-functional email address
|
27. December 2008 @ 07:20 |
Link to this message
|
|
Lol I love looking back on the forums. Part of me is glad I took a break. Guessswho your a real man for sticking around through the early days of the lite on FW lol. Anywho ya back to the Lite-on stuff
|
AfterDawn Addict
|
27. December 2008 @ 12:51 |
Link to this message
|
Originally posted by Dindi304:
Lol I love looking back on the forums. Part of me is glad I took a break. Guessswho your a real man for sticking around through the early days of the lite on FW lol. Anywho ya back to the Lite-on stuff
ha, thanks, I appreciate it. Would have been kind of sad to abandon my own thread. But worked out now, thank goodness, and it's turned back into something fairly decent.
Ha.
need jtag help? Xbox 360 console repair? PM me or chat |
|
Dindi304
Suspended due to non-functional email address
|
27. December 2008 @ 18:31 |
Link to this message
|
|
Ya I loved helping out but it just got to the point where it was just the same this and that everyday. Hell most of the time I wouldnt have to type anything id just copy and past info from the many places it was already posted. So my hats off to guessswho for stickin with it. People like you make this thread barrable.
|
Junior Member
|
28. December 2008 @ 00:14 |
Link to this message
|
|
|
AfterDawn Addict
|
28. December 2008 @ 16:31 |
Link to this message
|
it's just a different type of firmware that needs to be written, and they just need more time.
From what I've heard (but this isn't set in stone anywhere) it should be released in about a month. So hopefully we will get it there, but that isn't as solid of information compared to everything else I've posted earlier in this thread.
need jtag help? Xbox 360 console repair? PM me or chat |
AfterDawn Addict
2 product reviews
|
30. December 2008 @ 03:02 |
Link to this message
|
I just flashed my first lite-on and it was quite the experience. I used dvdkey32 out of JungleFlasher to get my key, inquiry, and identify. Everything was good, I tried a second time but was unsuccessful getting the key again. Tried the power cycling the drive, reclosing it halfway again, but no luck. I did however get to check the key with xtractor and they match so i decided to go ahead and flash. I have a VIA card so i was a little leary at this point since it wasn't my xbox and it was my first lite-on. I went ahead and loaded the dumped files in jungle flasher and spoofed to ix 1.5 and saved my Lite_CFW.bin file. Now i went to erase and read the commands carefully. When i went to power cycle the drive i must have waited to long and windows froze. I waited awhile and it would unfreeze for about 5 sec and then freeze again. Tried to power cycle the drive and no luck. I tried various things for awhile but with no luck. So what i ended up doing was taking a jump drive, I used iPrep to make it bootable and then just deleted all the files off of it. Downloaded dosflash 1.7 beta and used dosfhlash 16, i copied over the 2 files from dosflash16 and plus my Lite_CFW.bin. Booted to my jumpdrive and typed dosflash.exe and it recognized the lite-on. Select the corresponding number to the lite-on and it gave me 3 different commands, read, erase, write. I chose erase but come to find out if you just chose write, it will erase first and then write. Erased firmware and flashed the Lite_CFW.bin. And now my drive started working again!! Backups work flawlessly! Sorry for such a long post but i wanted to share my experience with everybody in hopes that it will help somebody that had the same problem i did!
|
|
Donaldo
Senior Member
|
30. December 2008 @ 03:21 |
Link to this message
|
yes i think its really just better to use the dosflash utility ... that's what i did today and it worked just fine. the jungle flasher will probably be decent down the road when the bugs are worked out ...
i give the guys all the credit in the world though for making this liteon flashing possible ! its a very good thing for anyone into xbox 360
|
Member
|
30. December 2008 @ 07:26 |
Link to this message
|
|
Leerage, any chance you could draft a tut for what you did? I have a friend that wants me to flash his liteon but I am not comfortable enough to do it. I would hate to brick it.
|
AfterDawn Addict
|
30. December 2008 @ 08:30 |
Link to this message
|
|
@leerage
When you tried flashing, did you follow the guide on how to flash the liteon with a via card? Such as, starting off by uninstalling the via drivers?
need jtag help? Xbox 360 console repair? PM me or chat |
|
pencilz
Newbie
|
30. December 2008 @ 10:30 |
Link to this message
|
|
Wow, thumbs up to this guesswho guy for his patience and assistance. I've never read so many stupid questions in one thread before and I don't think I've seen anyone else on any other forum look past at how stupid some questions are and still help out.
This message has been edited since posting. Last time this message was edited on 30. December 2008 @ 10:33
|
AfterDawn Addict
2 product reviews
|
30. December 2008 @ 11:29 |
Link to this message
|
Originally posted by pencilz:
Wow, thumbs up to this guesswho guy for his patience and assistance. I've never read so many stupid questions in one thread before and I don't think I've seen anyone else on any other forum look past at how stupid some questions are and still help out.
Just because someone doesn't know something and asks in a forum doesn't make them stupid. Yes I know a lot of material and answers are in this forum and does take some time to read, but you don't have to get on here and add nothing to the forum by bashing people on what you call "stupid" questions. Guessswho is a great person for answering everybody questions. It's people like you that ADD nothing to this forum and make this thread 20 pages. Please take your crap some where else.
|
|
pencilz
Newbie
|
30. December 2008 @ 11:30 |
Link to this message
|
Originally posted by leerage:
Originally posted by pencilz:
Wow, thumbs up to this guesswho guy for his patience and assistance. I've never read so many stupid questions in one thread before and I don't think I've seen anyone else on any other forum look past at how stupid some questions are and still help out.
Just because someone doesn't know something and asks in a forum doesn't make them stupid. Yes I know a lot of material and answers are in this forum and does take some time to read, but you don't have to get on here and add nothing to the forum by bashing people on what you call "stupid" questions. Guessswho is a great person for answering everybody questions. It's people like you that ADD nothing to this forum and make this thread 20 pages. Please take your crap some where else.
Fair enough; I never called anyone stupid though, I just think some of the questions asked are stupid.
This message has been edited since posting. Last time this message was edited on 30. December 2008 @ 11:31
|
AfterDawn Addict
2 product reviews
|
30. December 2008 @ 11:49 |
Link to this message
|
Originally posted by guessswho:
@leerage
When you tried flashing, did you follow the guide on how to flash the liteon with a via card? Such as, starting off by uninstalling the via drivers?
No, I did not do that. I am assuming that is why windows froze. I have uninstalled the via drivers and just have portio32 now. So i just leave all via drivers uninstalled? If that is the case it is going to kinda get annoying every time i boot my computer, windows is going to ask me to install the hardware.
|
AfterDawn Addict
|
30. December 2008 @ 12:15 |
Link to this message
|
Originally posted by leerage:
Originally posted by guessswho:
@leerage
When you tried flashing, did you follow the guide on how to flash the liteon with a via card? Such as, starting off by uninstalling the via drivers?
No, I did not do that. I am assuming that is why windows froze. I have uninstalled the via drivers and just have portio32 now. So i just leave all via drivers uninstalled? If that is the case it is going to kinda get annoying every time i boot my computer, windows is going to ask me to install the hardware.
just follow the guide on how to flash with a via card. It says everything step by step.
And I know it works.... I tested it out myself
need jtag help? Xbox 360 console repair? PM me or chat |
|
Advertisement
|
|
|
|
pencilz
Newbie
|
30. December 2008 @ 12:23 |
Link to this message
|
Originally posted by leerage:
Originally posted by guessswho:
@leerage
When you tried flashing, did you follow the guide on how to flash the liteon with a via card? Such as, starting off by uninstalling the via drivers?
So i just leave all via drivers uninstalled? If that is the case it is going to kinda get annoying every time i boot my computer, windows is going to ask me to install the hardware.
Delete the viamraid.sys file out of your c:\windows\system32\drivers.
|
