|
eurovox 5000 firmware install problems
|
|
|
BillyBaby
Newbie
|
14. January 2009 @ 14:53 |
Link to this message
|
hi there,
can someone please help me. I have a eurovox 5000. to download the lasest firmware i bought a usb serial adaptor but can't load the new firmware as the programme can't find my reciever.
|
|
Advertisement
|
|
|
|
Senior Member
|
14. January 2009 @ 15:05 |
Link to this message
|
|
did you follow HiTecks guide ? link is in my sig
Post on the thread exactly what your problem is and someone will give you a dig out (but if you follow the guide you probably won't need it)
Whatever you say, say nothing when you talk about you know what for if you know who might hear you, you know what youll get. Youll be sent off to you know where for you would not know how long. Maybe I could search through the threads so you dont have to ??
|
|
BillyBaby
Newbie
|
14. January 2009 @ 16:27 |
Link to this message
|
No joy with that, it only gives me 4 com ports and my usb is port 6
|
Senior Member
|
14. January 2009 @ 16:58 |
Link to this message
|
Did you read the bit about asigning USB ports on page1 ?
Whatever you say, say nothing when you talk about you know what for if you know who might hear you, you know what youll get. Youll be sent off to you know where for you would not know how long. Maybe I could search through the threads so you dont have to ??
|
|
anders91
Newbie
|
20. January 2009 @ 14:49 |
Link to this message
|
HI,
Can anyone tell me does the Eurovox 5000 work in the Dundalk area. I've chorus ntl in the house, used that feed but am still getting no channels. Some one told me that they don't think it works in the Dundalk area but only in Dublin and the 1000 model may be better suited. Any advise or help out there would be much appreciated.
jc
|
|
Westawake
Newbie
|
20. January 2009 @ 17:51 |
Link to this message
|
The Eurovox works in the Dundalk area. Just make sure you are following the instructions properly. Common mistake is the cable link up is not inserted in the RF IN Channel
|
|
anders91
Newbie
|
23. January 2009 @ 12:11 |
Link to this message
|
Many thanks for your help Westawake.
Originally posted by Westawake:
The Eurovox works in the Dundalk area. Just make sure you are following the instructions properly. Common mistake is the cable link up is not inserted in the RF IN Channel
jc
|
|
anders91
Newbie
|
23. January 2009 @ 12:14 |
Link to this message
|
Would it be possible that you may know the link for the lastest download for the Eurovox 5000?
thanks again.
Originally posted by Westawake:
The Eurovox works in the Dundalk area. Just make sure you are following the instructions properly. Common mistake is the cable link up is not inserted in the RF IN Channel
jc
|
|
anders91
Newbie
|
23. January 2009 @ 12:27 |
Link to this message
|
Hi, Can you tell me the signal that I need to scan the Eurovox 5000 on? There is three to choose from. 6952 6887 and one other. I'm in the Dundalk are, does it make any difference. Thank you
Originally posted by SG8:
did you follow HiTecks guide ? link is in my sig
Post on the thread exactly what your problem is and someone will give you a dig out (but if you follow the guide you probably won't need it)
jc
|
|
malci
Suspended due to non-functional email address
|
23. January 2009 @ 13:25 |
Link to this message
|
Yes of course it makes a difference, if you setup on the incorrect frequency then you will not receive the service, so you need to know who your provider is N*L 6887 - Cho*us 6875 it is one or the other, and do as SG8 has suggested go to the Eurovox link at the bottom of my post, better still click here >>>>>>>>>
http://forums.afterdawn.com/thread_view.cfm/674371
And follow HiTeck's guide, you will also get the Firmware you have requested there also.
|
|
anders91
Newbie
|
23. January 2009 @ 16:16 |
Link to this message
|
|
Thanks for all the help, its very good of you. I'm just a little confused as the lads that installed the box had ntl on their shirt. Ntl comes up on their box when its turned on but Chorus comes up on the screen on the tv. They have merged I'm aware. Maybe it's best to try both signals?
jc
|
|
malci
Suspended due to non-functional email address
|
23. January 2009 @ 16:37 |
Link to this message
|
Won't do any harm at all, if it does not get the channels on 6887 then make sure you do a Factory Default before using the Ch*rus symbol rate, and I hope you have flashed your box with the Firmware? and you are quite sure it is not Ch*rus MMDS?
|
|
anders91
Newbie
|
23. January 2009 @ 17:54 |
Link to this message
|
Tried both scans and nothing. I've installed the firmware from the link. I'm now going to try the factory default with the Ch+rus symbol rate. I had to put an adopter on the cable that goes into the Rf in part and I was wondering at this stage if that adapter was faulty. Hopefully not and the Factory default will work. Thanks again for all your help, very much appreciate it.
Originally posted by malci:
Won't do any harm at all, if it does not get the channels on 6887 then make sure you do a Factory Default before using the Ch*rus symbol rate, and I hope you have flashed your box with the Firmware? and you are quite sure it is not Ch*rus MMDS?
jc
|
|
anders91
Newbie
|
23. January 2009 @ 18:02 |
Link to this message
|
AAAAAAAAAAAhhhhh, nothing on the factory default. I'm almost at the giving up stage. I've tried almost everything. Anyone in the Dundalk area that can help. Anyone at all that can help. This is so frustrating. Please help, its driving me nuts, Thanks
Originally posted by anders91:
Tried both scans and nothing. I've installed the firmware from the link. I'm now going to try the factory default with the Ch+rus symbol rate. I had to put an adopter on the cable that goes into the Rf in part and I was wondering at this stage if that adapter was faulty. Hopefully not and the Factory default will work. Thanks again for all your help, very much appreciate it.
Originally posted by malci:
Won't do any harm at all, if it does not get the channels on 6887 then make sure you do a Factory Default before using the Ch*rus symbol rate, and I hope you have flashed your box with the Firmware? and you are quite sure it is not Ch*rus MMDS?
jc
|
|
anders91
Newbie
|
23. January 2009 @ 18:49 |
Link to this message
|
Hi again, I think my cable is Ch*rus MMDS. Does this make a difference? Is the box compatiable with this? Thanks once more for your time and help.
Originally posted by anders91:
AAAAAAAAAAAhhhhh, nothing on the factory default. I'm almost at the giving up stage. I've tried almost everything. Anyone in the Dundalk area that can help. Anyone at all that can help. This is so frustrating. Please help, its driving me nuts, Thanks
Originally posted by anders91:
Tried both scans and nothing. I've installed the firmware from the link. I'm now going to try the factory default with the Ch+rus symbol rate. I had to put an adopter on the cable that goes into the Rf in part and I was wondering at this stage if that adapter was faulty. Hopefully not and the Factory default will work. Thanks again for all your help, very much appreciate it.
Originally posted by malci:
Won't do any harm at all, if it does not get the channels on 6887 then make sure you do a Factory Default before using the Ch*rus symbol rate, and I hope you have flashed your box with the Firmware? and you are quite sure it is not Ch*rus MMDS?
jc
|
|
anders91
Newbie
|
23. January 2009 @ 18:53 |
Link to this message
|
I have Ch+rus MMDS for by cable. Does the Eurobox work on this ?
Originally posted by Westawake:
The Eurovox works in the Dundalk area. Just make sure you are following the instructions properly. Common mistake is the cable link up is not inserted in the RF IN Channel
jc
|
AfterDawn Addict
|
23. January 2009 @ 19:09 |
Link to this message
|
Originally posted by anders91:
I have Ch+rus MMDS for by cable. Does the Eurobox work on this ?
Originally posted by Westawake:
The Eurovox works in the Dundalk area. Just make sure you are following the instructions properly. Common mistake is the cable link up is not inserted in the RF IN Channel
no eurovox won't work on that you will need the box T ,digivox t or the eurovox tx
|
|
anders91
Newbie
|
23. January 2009 @ 19:38 |
Link to this message
|
Thanks for the reply. You've saved me hours of headaches and plenty of time. Thanks again
Originally posted by karljd:
Originally posted by anders91:
I have Ch+rus MMDS for by cable. Does the Eurobox work on this ?
Originally posted by Westawake:
The Eurovox works in the Dundalk area. Just make sure you are following the instructions properly. Common mistake is the cable link up is not inserted in the RF IN Channel
no eurovox won't work on that you will need the box T ,digivox t or the eurovox tx
jc
|
|
malci
Suspended due to non-functional email address
|
24. January 2009 @ 07:51 |
Link to this message
|
anders91, but I did tell you up above about the possibility of MMDS and making sure about that fact, think you could have saved yourself a bit of headache/hassle, don't you. >>>>>>
*********************************************************************
"Won't do any harm at all, if it does not get the channels on 6887 then make sure you do a Factory Default before using the Ch*rus symbol rate, and I hope you have flashed your box with the Firmware? and you are quite sure it is not Ch*rus MMDS?"
|
|
neildyr
Newbie
|
25. January 2009 @ 19:52 |
Link to this message
|
hi,sorry if im in the wrong place as its saying eurovox5000 but im wondering about the new firmware(UFL_MAX_V_30_11_08.exe) i just put on my eurovox max v.this is the latest forum i could find!!it hasn't fixed the code updating thingy!
is there anything i can do now as there is seldom any new codes for N@L posted!!any help would be greatly appreciated.
Cheers.
|
AfterDawn Addict
2 product reviews
|
25. January 2009 @ 20:24 |
Link to this message
|
Yep that is the latest with regards to updates the latest one is for the same box but has the auto-sort feature 05/12/08 but yours should still update.
Turn box off at the mains, power back up go to Menu, OK on Language settings, type 1968 then again 1968 then press Default key (Yellow Button) exit back to TV and wait for it to update, if it doesn't update change channel but wait about 5 mins in between. start off on s*y sp*rts 1 then to 2 and so on.
|
|
neildyr
Newbie
|
25. January 2009 @ 22:41 |
Link to this message
|
|
woohoo!Thanks Hiteck.all is good now!
really appreciate all your efforts.hopefully itll be the last time it goes,but i doubth it!haha.
thanks once again.
|
AfterDawn Addict
2 product reviews
|
26. January 2009 @ 13:44 |
Link to this message
|
|
Your welcome, all the best.
|
|
Advertisement
|
|
|
|
anders91
Newbie
|
3. February 2009 @ 12:17 |
Link to this message
|
Can you tell me do you need to keep a subscription with Chorus (MMDS) if you have the Digivox T or can you cancel? Thank you.
Originally posted by HiTeck:
Your welcome, all the best.
jc
|
