|
ETA for iXtreme 1.6 (5-14-09)!! iXtreme 1.51 + JF 0.1.59.
|
|
AfterDawn Addict
|
10. March 2009 @ 23:03 |
Link to this message
|
Originally posted by thumpy:
are they ever going to make a unstealth version for the crappy lite-ons?
Currently, they are NOT planning on making an unstealth liteon firmware. It might change later on, but according to the devs, not right now.
Originally posted by Matt1039:
I just realized I think they're talking about UPGRADING from 1.5 to 1.51....what about a liteon that has never been flashed?
If it has never been flashed, you'll have to have a key reader (ck3, xtractor, etc.) in order to read the key from your liteon.
Originally posted by cincyfan9:
Will there be an update for xdvdmulleter? I love that program. I want to check stealth with at least two diff programs. I check with abgx360 so what else can I use to check 3rd wave games?
Ditto on above post. XDVDmulleter is no longer used. Use abgx. If it passes that, then that is the one stop app to use. It will keep you safe (as much as possible) from getting banned.
need jtag help? Xbox 360 console repair? PM me or chat |
|
Advertisement
|
|
|
|
|
mesh2
Newbie
|
10. March 2009 @ 23:37 |
Link to this message
|
So ive been reading tutorial on 1.51 flashing with jungleflash, but man there are too many steps. Here is the question I have... Can I do it the old way? I still have my Orig.bin (original firmware) form the last time i flashed it. CAn I...
Bust the ol' 'firmtool orig.bin <ixtreme 1.51>' (creates hacked FW)
Dosflash16 to erase my BenQ drive
Dosflash16 to write the hacked FW (created by the firmtool step)
I know there are more steps in between, but thats the jist :)... Anyone know if this is possible? I just seems easier to me. Thanks in advance. Peace
|
Newbie
|
10. March 2009 @ 23:43 |
Link to this message
|
yea with the benqs you can literally update it. using firmtool will work. i used iprep which uses firmtool and you dont even need your original bin for it.
|
|
mesh2
Newbie
|
11. March 2009 @ 00:08 |
Link to this message
|
Originally posted by xxdu4xx:
yea with the benqs you can literally update it. using firmtool will work. i used iprep which uses firmtool and you dont even need your original bin for it.
I assume the same applies to virgin LiteOn drives(Jasper)? I plan on getting one soon ;). Textbook says you can use IPrep (firmtool) for LiteOn drives, but I just want to confirm with someone who's done it. By the way thank you for responeding. Peace
|
AfterDawn Addict
|
11. March 2009 @ 00:09 |
Link to this message
|
I've also used iprep to flash sammy's, except with the updated firmware. No reason it wouldn't work
need jtag help? Xbox 360 console repair? PM me or chat |
Senior Member
|
11. March 2009 @ 00:33 |
Link to this message
|
Originally posted by mesh2:
Originally posted by xxdu4xx:
yea with the benqs you can literally update it. using firmtool will work. i used iprep which uses firmtool and you dont even need your original bin for it.
I assume the same applies to virgin LiteOn drives(Jasper)? I plan on getting one soon ;). Textbook says you can use IPrep (firmtool) for LiteOn drives, but I just want to confirm with someone who's done it. By the way thank you for responeding. Peace
does textbook have new tut with liteon?
If you send me questions on Live about modding or anything related i will block you. Dont be an idiot.
|
|
mesh2
Newbie
|
11. March 2009 @ 01:02 |
Link to this message
|
Originally posted by stealthdf:
Originally posted by mesh2:
Originally posted by xxdu4xx:
yea with the benqs you can literally update it. using firmtool will work. i used iprep which uses firmtool and you dont even need your original bin for it.
I assume the same applies to virgin LiteOn drives(Jasper)? I plan on getting one soon ;). Textbook says you can use IPrep (firmtool) for LiteOn drives, but I just want to confirm with someone who's done it. By the way thank you for responeding. Peace
does textbook have new tut with liteon?
No my mistake. I saw Lite on in the text "Philips/BenQ/LiteOn VAD6038 Tutorial" but it was under BenQ (Textbook.2008). My fault. So, is there a guide for the Jasper LiteOn drives. Jungleflash?
|
AfterDawn Addict
2 product reviews
|
11. March 2009 @ 01:47 |
Link to this message
|
Originally posted by mesh2:
No my mistake. I saw Lite on in the text "Philips/BenQ/LiteOn VAD6038 Tutorial" but it was under BenQ (Textbook.2008). My fault. So, is there a guide for the Jasper LiteOn drives. Jungleflash?
Here
|
|
assman21
Suspended due to non-functional email address
|
11. March 2009 @ 02:16 |
Link to this message
|
Originally posted by bd911:
Originally posted by assman21:
or for $190 bucks you can buy a ntsc console and not replace all that stuff and have both versions to choose from or sell 1
Had to edit out my sarcastic remark.... no harm no foul.
This aint home shopping network son stop trying to rip off members when they can get the same thing easier and with less work son son.
|
|
mesh2
Newbie
|
11. March 2009 @ 07:44 |
Link to this message
|
Originally posted by leerage:
Originally posted by mesh2:
No my mistake. I saw Lite on in the text "Philips/BenQ/LiteOn VAD6038 Tutorial" but it was under BenQ (Textbook.2008). My fault. So, is there a guide for the Jasper LiteOn drives. Jungleflash?
Here
Thank you. So JungleFlasher is the only way for a Jasper LiteOn? I cant use DosFlash16 / Makefirm.exe(old way)? Im asking 'cause ive done the old method and am more familiar with it. But if I must use JungleFlasher im sure im capable :). Again, gracias. Peace
|
|
mesh2
Newbie
|
11. March 2009 @ 07:53 |
Link to this message
|
Originally posted by mesh2:
Originally posted by leerage:
Originally posted by mesh2:
No my mistake. I saw Lite on in the text "Philips/BenQ/LiteOn VAD6038 Tutorial" but it was under BenQ (Textbook.2008). My fault. So, is there a guide for the Jasper LiteOn drives. Jungleflash?
Here
Thank you. So JungleFlasher is the only way for a Jasper LiteOn? I cant use DosFlash16 / Makefirm.exe(old way)? Im asking 'cause ive done the old method and am more familiar with it. But if I must use JungleFlasher im sure im capable :). Again, gracias. Peace
Aha... This is the only way, there is no soft method... I just read through a piece of the guide. Sorry, I probably shouldve read before i posted. Hey, its 4:50am here and im leaving for work here :). Thanks for everybody's help. My next post will be from my cubicle at work.
|
Newbie
|
11. March 2009 @ 09:24 |
Link to this message
|
|
Let me know how it goes. i know that iprep 008 has an option for doing the lite-on drives but i havent flashed one myself so please do post your results.
|
AfterDawn Addict
2 product reviews
|
11. March 2009 @ 10:05 |
Link to this message
|
Originally posted by mesh2:
Originally posted by mesh2:
Originally posted by leerage:
Originally posted by mesh2:
No my mistake. I saw Lite on in the text "Philips/BenQ/LiteOn VAD6038 Tutorial" but it was under BenQ (Textbook.2008). My fault. So, is there a guide for the Jasper LiteOn drives. Jungleflash?
Here
Thank you. So JungleFlasher is the only way for a Jasper LiteOn? I cant use DosFlash16 / Makefirm.exe(old way)? Im asking 'cause ive done the old method and am more familiar with it. But if I must use JungleFlasher im sure im capable :). Again, gracias. Peace
Aha... This is the only way, there is no soft method... I just read through a piece of the guide. Sorry, I probably shouldve read before i posted. Hey, its 4:50am here and im leaving for work here :). Thanks for everybody's help. My next post will be from my cubicle at work.
For the most part it is completely a soft mod. Once you have extracted the Key, Identify, Inquiry, and Serial data via a Lite-ON key reader, everything is completely done via SATA at that point.
There is other ways to get the Lite-ON info but those methods are flawed. The only way to get the complete info is through Jungle Flasher 0.1.51.
This message has been edited since posting. Last time this message was edited on 11. March 2009 @ 10:08
|
Newbie
|
11. March 2009 @ 10:34 |
Link to this message
|
any word on when 1.6 is to be released? i have an extra toshiba that id like to use as a rip drive.
|
AfterDawn Addict
|
11. March 2009 @ 10:40 |
Link to this message
|
Originally posted by xxdu4xx:
any word on when 1.6 is to be released? i have an extra toshiba that id like to use as a rip drive.
you dont have to wait if you have a tosh drive, 0800 has been out for a few years for that drive. same with benq, 0800 will only be new to hitachis and lite-ons.
dindi---
whats up man...sorry for not replying to your previous post, i didnt see it until last night.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
Newbie
|
11. March 2009 @ 11:15 |
Link to this message
|
|
oh ok cool. ive only been flashing since 1.4 and i wasnt sure if it had 0800 support. thanks!!
|
AfterDawn Addict
|
11. March 2009 @ 11:17 |
Link to this message
|
|
no problem.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
Newbie
|
11. March 2009 @ 12:30 |
Link to this message
|
|
this may be a stupid question but does 1.51 already have 0800 for toshibas or do i need to downgrade it?
|
AfterDawn Addict
|
11. March 2009 @ 12:57 |
Link to this message
|
No.
You'd have to either flash the drive with the 0800 bin, which can be found in the original Toshiba-Samsung Xtreme firmware. Or you would have to flash the drive to an older Xtreme (not iXtreme) firmware and then use the 0800 disc. This is because 0800 unlock was disabled in iXtreme.
|
Newbie
|
11. March 2009 @ 13:41 |
Link to this message
|
|
Thanks for the help!! Much appreciated!! :)
|
|
daboy85
Newbie
|
11. March 2009 @ 17:18 |
Link to this message
|
hey i have a couple questions, I have a benq with 1.4 and when 1.6 comes on i want to reflash my drive, but im paranoid to do it becuase i already f-ed one benq drive. i bought another xbox with the new liteon, i have no idea how to do the flash. i bought a sata raid controller to do the mod but alot of the information ive read and you need a key extracter, when i did my benq drive all i had to do was type in some commands and it was done. is there anything similar to that? also if I already have 1.4 on my benq drive do i need any of the orginal information that i dumped off my benq drive? HELP!
|
|
mesh2
Newbie
|
11. March 2009 @ 18:56 |
Link to this message
|
Originally posted by daboy85:
hey i have a couple questions, I have a benq with 1.4 and when 1.6 comes on i want to reflash my drive, but im paranoid to do it becuase i already f-ed one benq drive. i bought another xbox with the new liteon, i have no idea how to do the flash. i bought a sata raid controller to do the mod but alot of the information ive read and you need a key extracter, when i did my benq drive all i had to do was type in some commands and it was done. is there anything similar to that? also if I already have 1.4 on my benq drive do i need any of the orginal information that i dumped off my benq drive? HELP!
Jungleflasher tutorial is a good place to start. http://www.360mods.net/JungleFlasher/JungleFlasher.pdf
|
|
cincyfan9
Junior Member
|
11. March 2009 @ 20:45 |
Link to this message
|
So let me get this right to flash a lite-on from 1.5 to 1.51 I just need to dump the dummy.bin file from the 1.5 firmware and merge it with the 1.51? The dummy is the only one I need to dump so I just check the box in jungle flasher that says dummy.bin only? or do I need to dump all the files like the first time?
|
AfterDawn Addict
|
11. March 2009 @ 20:49 |
Link to this message
|
|
how about just follow the tutorial. Do exactly as it says and you will be fine
need jtag help? Xbox 360 console repair? PM me or chat |
|
Advertisement
|
|
|
Senior Member
|
12. March 2009 @ 12:02 |
Link to this message
|
Originally posted by assman21:
or for $190 bucks you can buy a ntsc console and not replace all that stuff and have both versions to choose from or sell
This aint home shopping network son stop trying to rip off members when they can get the same thing easier and with less work son son.
could you PM me and point out where I was ripping somebody off?
|
