|
no drive detected in jungle flasher
|
|
|
hitmanxp
Junior Member
|
9. March 2009 @ 23:09 |
Link to this message
|
well i'm at the process of setting my hitachi drive to mode B in jungle flasher and i can't find it. I have the hitachi drive connected to my motherboard sata cable and i did the port IO part. But it still can't detect it. Anyone have any clue ? Thanks in advance
|
|
Advertisement
|
 |
|
|
|
dpalma89
Newbie
|
10. March 2009 @ 00:15 |
Link to this message
|
can someone please help me. I've been reading guides but nothing works. I know my computer reads the hitachi drive because when i boot up my computer and press f2, it reads the hitachi drive on my sata port. Please help me i'm starting to give up hope
|
|
mazz0310
Member
|
10. March 2009 @ 00:18 |
Link to this message
|
I had the same problem with the BenQ drive... you basically, or atleast I did, play around with it, try shutting off the drive and jungleflasher, and do absolutely nothing but turn on the drive and then open jungleflasher, I kinda had one chance to have the drive detected and put it in Vendor Mode and if I changed the drive location I had to do it again. So get the program on the location you think the drive is, turn off jungleflasher and the drive and then turn them both on starting with the drive.
Confusing but thats what worked for me.
|
Senior Member
|
10. March 2009 @ 00:38 |
Link to this message
|
i had hitachi issues as well, here's what i did
1. power up xbox
2. eject drive
3. unplug power while drive is open (you have to hold it to stay open)
4. open jungleflasher
5. power xbox back up (holding driev again-center light should be flashing)
this should get your drive detected in the upper right of jf. if it doesnt show in the vendor section but it is in the drive section just proceed with flash. mine never showed in vendor section but i went ahead anyway and it worked.
|
|
dpalma89
Newbie
|
10. March 2009 @ 01:33 |
Link to this message
|
nothing works idk what to do. I followed the guide given by jungle flasher and it still hasn't detected the drive. At first i thought it was that my sata drive couldn't read the hitachi drive but my computer recognizes it. Could it be that i didn't do something before. I did the port IO because i can see it in my device manager. Other than that what else do i have to do. If this doesn't work do you recommend doing the slax method ? Thank you again for all your help i really appreciate it.
|
AfterDawn Addict
|
10. March 2009 @ 01:57 |
Link to this message
|
Does atleast jungleflasher see the drive?
I just flashed a hitachi 79, and windows did NOT detect the drive. However, jf did see it over sata. I went ahead and just flashed it and it worked perfect
need jtag help? Xbox 360 console repair? PM me or chat |
|
hitmanxp
Junior Member
|
10. March 2009 @ 02:18 |
Link to this message
|
no jungle flasher didn't see the drive for some reason. The only way i can tell that my computer reads the drive is by pressing f2 when i boot up my computer and it shows up in SATA 1. It doesn't even show on my computer. Arghhh i just don't know what to do lol could it not be working because im not using a sata pci adapter? I mean i have 4 sata drives on my motherboard but maybe that has something to do with it?
|
Senior Member
|
10. March 2009 @ 03:08 |
Link to this message
|
when i did it, only 1 of the 4 sata plugs on my mobo worked so maybe try all 4 plugs?
|
|
hitmanxp
Junior Member
|
10. March 2009 @ 03:18 |
Link to this message
|
I've tried connecting the cable to all my sata drives except the one where my hard drive is connected to since i fear that my computer might not run after i switch it up. Can anyone confirm me that its safe to move the hard drive sata cable to another port since its the only one i haven't tested for my hitachi drive.
|
AfterDawn Addict
|
10. March 2009 @ 10:59 |
Link to this message
|
Try DosFlash32, my computer didn't recognize my BenQ drive, Jungleflasher didn't either, Dosflash did.
Xbox 360: Slim untouched with a faked 320 GB harddrive for XBL, phat with LT 3.0, played Halo early, so going on live would be an instand ban, also with a faked 320 GB harddrive
PS3: Untouched 160 GB Slim, 60 GB Fat with latest Rogero and 160 GB internal harddrive.
PSVita: hardly ever play it
GameCube: Black with a Viper chip installed. With gameboy player. Trying to get a Wavebird controller.
|
|
hitmanxp
Junior Member
|
10. March 2009 @ 12:56 |
Link to this message
|
|
can anyone tell me how dosflash 32 works since jungle flasher just isn't working with me. Thanks
|
Senior Member
|
10. March 2009 @ 13:08 |
Link to this message
|
hitmanxp, why not just flash your drive with FirmwareToolbox since your having problems with JungleFlasher. Also, when you say you installed Port I/0, did you install it manually or how did you install it? That is kind of weird, when I installed Port I/0 my Samsung drive wasn't detected in Windows but JungleFlasher did detect my drive on my VIA card..
Q9550@4.0ghz,Gigabyte EP45-UD3P,OCZ Vendetta 2 cooler,VisionTek 4870X2,1TB Samsung Spinpoint SATA/3GB,4GB G.Skill DDR2 1066,LG Blu-ray/HDDVD combo drive,Corsair HX-1000 Modular,Hannspree 28" LCD,Coolermaster Cosmos S
http://valid.canardpc.com/show_oc.php?id=473095
2 Xbox 360 Jaspers(flashed w/Ixtreme LT), PS3, Wii
Samsung 4071,Samsung 4095, Samsung 245BW LCD Displays |
|
hitmanxp
Junior Member
|
10. March 2009 @ 13:17 |
Link to this message
|
yea i installed it manually but don't i have to set my hitachi 78fk drive in mode b first then flash it.
|
|
dalecore
Member
|
10. March 2009 @ 13:45 |
Link to this message
|
Originally posted by hitmanxp:
yea i installed it manually but don't i have to set my hitachi 78fk drive in mode b first then flash it.
Yeah thats right I'm having the same problem. Its not reading in jungle flasher everything is plugged up. Mode b is used so that the drive can be reconized you will really see the drive with a drive letter. Then your ready to flash.
I think I'm going to use the Slax CD.
|
Senior Member
|
10. March 2009 @ 13:50 |
Link to this message
|
sounds to me like jungleflasher wasnt thoroughly tested with hitachi.all i can say is if your drive is seen in the drive pull-down area you should be good to go.
|
|
dalecore
Member
|
10. March 2009 @ 15:57 |
Link to this message
|
Originally posted by uturn68:
sounds to me like jungleflasher wasnt thoroughly tested with hitachi.all i can say is if your drive is seen in the drive pull-down area you should be good to go.
I don't think I even bothered to check that got to look next time but if you see it don't you still have to go into mode b?
|
|
brandonba
Member
|
10. March 2009 @ 16:00 |
Link to this message
|
its not detecting my benq either
|
|
belenos
Senior Member
|
10. March 2009 @ 16:02 |
Link to this message
|
|
yes go in mode-b. Mine didnt show in the drop down menu but did show in drive properties so i went ahead and flashed and it works fine. try switching between port io and winapi
|
|
dpalma89
Newbie
|
11. March 2009 @ 00:21 |
Link to this message
|
hey everybody i managed to get my hitachi 78 drive into mode B by using slax since jungle flasher didn't work. Now i don't know what to do. Do i still use jungle flasher or what? I'm sorry for asking so much its just that i'm lost. Thanks in advance
|
|
hitmanxp
Junior Member
|
11. March 2009 @ 01:38 |
Link to this message
|
hey guys here is a little update. I tried using jungle flasher and it said raw dump failed. Then i tried firmware tools and after i clicked save on the raw dump options, my computer froze. Now i just read a guide and it said that i had to turn raid off if i was using an onboard sata drive. I'm using the sata drive on my mother board so can that be the reason why its not working.
|
|
dalecore
Member
|
11. March 2009 @ 10:16 |
Link to this message
|
Originally posted by dpalma89:
hey everybody i managed to get my hitachi 78 drive into mode B by using slax since jungle flasher didn't work. Now i don't know what to do. Do i still use jungle flasher or what? I'm sorry for asking so much its just that i'm lost. Thanks in advance
Yep just follow the rest of the tutorial. I did it yesterday and was succesful. So how didn't it work.
|
|
kou2343
Newbie
|
20. March 2009 @ 19:23 |
Link to this message
|
hi guys! quick question!im having trouble opening the jungle flasher and that portIO32 thing! when i go to open it i get this error "0xc0000135".it says it failed to initialize properly.i tried deleting it then download again but it says the same thing!and also my computer wont detect my xbox drive either! can anyone help me! >.<
|
|
belenos
Senior Member
|
20. March 2009 @ 20:27 |
Link to this message
|
|
if your using vista try right click and run as admin.
also try running what.net.exe and make sure your good there.
if running as admin fails try running in compatibility mode
|
|
Actright
Newbie
|
24. July 2009 @ 13:11 |
Link to this message
|
|
i get error (0xc0000135)when i try to run jungle flasher and im using xp pro
|
|
Advertisement
|
|
|
AfterDawn Addict
2 product reviews
|
24. July 2009 @ 13:30 |
Link to this message
|
Originally posted by Actright:
i get error (0xc0000135)when i try to run jungle flasher and im using xp pro
Might need to install .Net framework 2.0 or higher.
|
