KRYPTVIEW A750

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Thursday 30.10.2025 / 21:42

Search AfterDawn Forums:

afterdawn.com > forums > home theater > digital tv - uk & europe > kryptview a750

Browse by topic

Forums

Start a new thread

KRYPTVIEW A750

Jump to:

Posted

Message

Page:	1	2	3	4	5	... Next >	Last >>

fergusrb

Suspended permanently

8. April 2009 @ 09:21

Link to this message

this is for information for the Kryptview Arnet A750 please try to keep it on this topic if possible i will try to answer your questions to the best of my ability

all you need for that box is on the end of my post in my signature

how to set it up etc
these are the Arnet boxes below

this is the older silver model

this is the latest model available above

this is the cable needed below if you have a comport on your pc

this is what you need also if you dont have a comport

This is the wrong null modem cable below

this is a VGA port

this is what you need on your laptop comport

this is a usb port

This is the f connector adapter you need for your box

Radionics in Rialto Dublin stock them at 1.49euro each

or pick up a new cable with rf and push in connector most stores have these

TO MANUALLY INPUT FREQ FOR MMDS ONLY AS IT DONT SCAN THAT

network >>>> you put your provider in here ie NTL
channel you can start at 1
frequency >>>>>>>> your first number (ie) 362.000
symbol rate >>>>>> if not on 6887 change it to that
modulation >>>>>> 64 QAM it should be on that
channel search type always at >>>>> network

then press the YELLOW BUTTON ONLY

you will need to do this for each freq number you have to get it right

ASSIGNING A COMPORT WITH USB ADAPTER

Problems with your PC/Laptop not recognising your box.

To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:

1. Go to the Start Menu
2. Right click on "My Computer"
3. Select "Properties"
4. Click on the "Hardware" tab
5. Click on "Device Manager"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
9. You should be able to transfer data once the correct port is selected

If you need drivers go here

http://www.gilsson.com/usb_drivers_download.htm

Follow my advice to step 7. Locate your USB Adapter (port *)

Right click on that port and select properties. Then select port settings, then select advanced. At the bottom of that tab will be a drop down box with the port selected (port * in your case). Use the drop down to select another port (eg 1, 2 or 3). If the port you want to use is already allocated to something else, you can use the same procedure to reassign that port after you have finished.
Save the selections in the usual way. The USB converter will be permanently assigned to the port you selected.


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.