Originally posted by tinker197:

---

@LiquidKil
this is my drive
dg-16d2s09c
h/w a0a2
f/w 83850c
july 2009
it can be flashed
hincey sorted out my drive
my problem was my onboard sata ports (nforce)
you need the via 6421 sata card

---

Originally posted by tinorp:

---

Hey Leerage. Do you have Tut in how to flash The Hitachi drive with Jungleflasher. All your tutorial are one of the best. I have learn how to flash all the drives exempt the Hitachi drive. No one has good tutorial at all. Thank you for your Help.

---

Originally posted by leerage:

---

Naser075 and LiquidKil: Can you please confirm for the me the manufacturer date of your Lite-ONs? Seems there is a second 83850C being produced that won't allow the key to be dumped!! This could be your issue!

---

Originally posted by pornzi:

---

Not re flashing now as i shouldnt need to since you can start drive in 0800 by having it half open while booting pc,

But windows wont read it as a drive just my bios,

If anybody had the same prob or any ideas thanks

---

Originally posted by kondud:

---

First translator:
I greet again from the Poland. I described all from the beginning. I read the key from drive DVD. I used power supply the console. I disconnected two times while reading the key power supply from drive DVD. Dodge it was successful to read. I already have new ready firmware to the drive. I did not install him yet because I have the problem.
If I switch off the console this opens drive DVD and becomes so, in the open position. And 2 are cases now:
1.. If I turn on the console the button ?Power? this is closes the drive first and he opens then alone. He so already becomes. ?Opening?is shows at the TV. The diode ?Power?winks the whole time.
2.. If I turn on the console the button ?Eject? this is closes the drive. He is at the TV ?Unlock the drive?. The diode ?Power?winks the whole time.

What oneself could stand?

Second translator:
Hello again from the Polish. I described everything from the beginning. I read the key from the DVD drive. I used the power of the console. While reading the key twice disconnected power from the DVD drive. The key could be read. I have already finished a new firmware to the drive. Not yet Uploader because I have a problem.
If you turn off the console that opens the DVD drive and so is, in the open position. And now there are 2 cases:
1. If I turn the console by pressing the "Power" is the first drive and then closes itself opens. Already is. On TV shows are "Open". All the time blinking LED "Power".
2. If I turn the console by pressing the "Eject" the drive is closed. On TV is "Open Drive". All the time blinking LED "Power".

What oneself could stand?

---

Originally posted by leerage:

---

Originally posted by kondud:

---

First translator:
I greet again from the Poland. I described all from the beginning. I read the key from drive DVD. I used power supply the console. I disconnected two times while reading the key power supply from drive DVD. Dodge it was successful to read. I already have new ready firmware to the drive. I did not install him yet because I have the problem.
If I switch off the console this opens drive DVD and becomes so, in the open position. And 2 are cases now:
1.. If I turn on the console the button ?Power? this is closes the drive first and he opens then alone. He so already becomes. ?Opening?is shows at the TV. The diode ?Power?winks the whole time.
2.. If I turn on the console the button ?Eject? this is closes the drive. He is at the TV ?Unlock the drive?. The diode ?Power?winks the whole time.

What oneself could stand?

Second translator:
Hello again from the Polish. I described everything from the beginning. I read the key from the DVD drive. I used the power of the console. While reading the key twice disconnected power from the DVD drive. The key could be read. I have already finished a new firmware to the drive. Not yet Uploader because I have a problem.
If you turn off the console that opens the DVD drive and so is, in the open position. And now there are 2 cases:
1. If I turn the console by pressing the "Power" is the first drive and then closes itself opens. Already is. On TV shows are "Open". All the time blinking LED "Power".
2. If I turn the console by pressing the "Eject" the drive is closed. On TV is "Open Drive". All the time blinking LED "Power".

What oneself could stand?

---

Connect the drive back to the PC. Make sure the proper I/O port is selected (the one you have the Lite-ON connected to). Click Intro/ Device ID to gain access to the flash chip. Re-write the firmware.

---