|
Jungle Flasher Tutorial for STOCK 83850C Lite-ON (pictures included)
|
|
AfterDawn Addict
2 product reviews
|
9. October 2009 @ 16:42 |
Link to this message
|
Try the Lite-ON erase again. Once you see the dots go across, unplug the DVD drives power cable for 1 second and then plug it back in. Should get staus (0x72).
|
|
Advertisement
|
|
|
|
|
kondud
Newbie
|
9. October 2009 @ 17:45 |
Link to this message
|
Originally posted by leerage:
Try the Lite-ON erase again. Once you see the dots go across, unplug the DVD drives power cable for 1 second and then plug it back in. Should get staus (0x72).
But I'm not erase Lite-On. Firmware is all the time our original. I read far only key.
|
AfterDawn Addict
2 product reviews
|
9. October 2009 @ 20:55 |
Link to this message
|
Originally posted by kondud:
Originally posted by leerage:
Try the Lite-ON erase again. Once you see the dots go across, unplug the DVD drives power cable for 1 second and then plug it back in. Should get staus (0x72).
But I'm not erase Lite-On. Firmware is all the time our original. I read far only key.
If you have the DVDkey, then you need to go ahead and flash the firmware.
|
|
4g63evo
Suspended due to non-functional email address
|
11. October 2009 @ 19:19 |
Link to this message
|
|
if i brick the drive how do it Unbrick it? I am 2 step away from finish this project..damn
Bruce lee invented Vtec. Chuck Noris uses Ivtec
|
AfterDawn Addict
2 product reviews
|
11. October 2009 @ 19:29 |
Link to this message
|
Originally posted by 4g63evo:
if i brick the drive how do it Unbrick it? I am 2 step away from finish this project..damn
You just need to re-intro the drive. Hook it back up to the same SATA port and click Intro/ Device ID. I'm assuming the erase did not go well?
|
|
4g63evo
Suspended due to non-functional email address
|
11. October 2009 @ 19:38 |
Link to this message
|
|
do i jsut go strait to the mtkflash and just click "re intro"?
anyway, awesome tut :)
Bruce lee invented Vtec. Chuck Noris uses Ivtec
|
|
GTA2787
Member
|
12. October 2009 @ 03:09 |
Link to this message
|
|
@leerage
Is it true that the new lite on 8 series have problem in loading the key. Are all the 8 series lite on havin this problem or is it a specific batch.
|
|
4g63evo
Suspended due to non-functional email address
|
12. October 2009 @ 03:45 |
Link to this message
|
|
if you follow his tutorial you will do fine. I just happen to click one wrong button and everything all goes wrong.
Bruce lee invented Vtec. Chuck Noris uses Ivtec
|
|
ryanmcf
Junior Member
|
13. October 2009 @ 02:04 |
Link to this message
|
|
LITEON 83850C with A0A2 successfully flashed.THX for the tutorial :)
FDOU
Lot# 0931X
July 31 09
|
Member
|
13. October 2009 @ 04:48 |
Link to this message
|
hi Leerage
just to say a big thanks for this tut, done my 1st 83850C for a mate and it went ok :) was a little worried when i saw the manufacture date of july this year, but all panned out fine. The only hiccup i did have was trying to cycle / half open the drive after clicking 'ok' on the txt boxes - doh what a plank !!!! and kept getting bad returns lol when i actually thought about it and done it properly it was fine.
big thanks again to you :)
|
AfterDawn Addict
2 product reviews
|
13. October 2009 @ 09:11 |
Link to this message
|
Originally posted by ryanmcf:
LITEON 83850C with A0A2 successfully flashed.THX for the tutorial :)
FDOU
Lot# 0931X
July 31 09
Originally posted by Toaster68:
hi Leerage
just to say a big thanks for this tut, done my 1st 83850C for a mate and it went ok :) was a little worried when i saw the manufacture date of july this year, but all panned out fine. The only hiccup i did have was trying to cycle / half open the drive after clicking 'ok' on the txt boxes - doh what a plank !!!! and kept getting bad returns lol when i actually thought about it and done it properly it was fine.
big thanks again to you :)
Thanks guys. Glad I could help. :)
|
AfterDawn Addict
2 product reviews
|
13. October 2009 @ 09:12 |
Link to this message
|
Originally posted by GTA2787:
@leerage
Is it true that the new lite on 8 series have problem in loading the key. Are all the 8 series lite on havin this problem or is it a specific batch.
August 2009 and up Lite-ONs.
|
Junior Member
|
14. October 2009 @ 01:12 |
Link to this message
|
So mine is an august 2009 83850c am i screwed ??? I get no reaction when i try to dump the key just keep getting 000000's in my log where most people have info on thier drive. Then it says 803info key extraction failed or something to that effect . Does this mean that this particular drive isnt gonna be able to be flashed or do i have other options i can look into for this drive revision?
My Jungleflasher Log:::
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.66 Beta
Session Started Wed Oct 14 02:16:54 2009
This is a 32 bit process running on 2 x 32 bit CPUs
PortIO is installed and running.
Found 6 I/O Ports.
Found 1 Com Ports.
Found 4 windows drives C: D: F: G:
Found 2 CD/DVD drives D: F:
Sending LO83info request to I/O port 0x30C8
............
................
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
LO83info extraction Failed!
Sending LO83info request to I/O port 0x30C8
............
................
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
LO83info extraction Failed!
Sending LO83info request to I/O port 0x30C8
............
................
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
LO83info extraction Failed!
"I am the Alpha and Omega, the Begining and End!"
This message has been edited since posting. Last time this message was edited on 14. October 2009 @ 02:36
|
Member
|
14. October 2009 @ 07:28 |
Link to this message
|
hi cb9983
I'm not sure if you have the newer version DVD drive or not but i had the same issue with the july 09 model i was flashing, basically i was trying to get the drive into its half open state after clicking 'ok' like you do when you power on/off quickly whilst erasing / writing the fw to get a good return code. When i re-read the guides and followed the 'eject, power off, push tray half in and power on' then press 'ok' i got a good return and carried on...
|
AfterDawn Addict
2 product reviews
|
14. October 2009 @ 09:08 |
Link to this message
|
Originally posted by cb9983:
So mine is an august 2009 83850c am i screwed ??? I get no reaction when i try to dump the key just keep getting 000000's in my log where most people have info on thier drive. Then it says 803info key extraction failed or something to that effect . Does this mean that this particular drive isnt gonna be able to be flashed or do i have other options i can look into for this drive revision?
You are going to have to wait. At the moment, the August 2009 Lite-ONs on up can not be dumped. Microsoft/Lite-ON has changed either changed the key location or a different encryption. The firmware team is already working on this. I'm optimistic that it will be cracked; it just takes time. If there is any new about the August 2009 drives, I'm sure it will be posted here.
|
Junior Member
|
14. October 2009 @ 15:20 |
Link to this message
|
Thx for the reply guys. Man its disheartening its been sooo easy up till this point . I have heard that around 50 percent of the august 09 drives or later can be flashed but the only way to tell is to give it a try in jf , the guy at jungleflashers irc chat told me as much . Im bummed out now but thx for the help.
"I am the Alpha and Omega, the Begining and End!"
This message has been edited since posting. Last time this message was edited on 14. October 2009 @ 15:22
|
|
tomsinite
Newbie
|
17. October 2009 @ 13:13 |
Link to this message
|
Do i need a PCI card if my computer has sata ports???
|
AfterDawn Addict
2 product reviews
|
17. October 2009 @ 13:16 |
Link to this message
|
Originally posted by tomsinite:
Do i need a PCI card if my computer has sata ports???
I replied to your PM.
|
|
redbaboon
Newbie
|
17. October 2009 @ 23:59 |
Link to this message
|
|
Hi all, been reading up on the 83850C issue and believe mine may be the unflashable version. Any tips?
LOT NO: 00928X
TEAM:CSON
MFR Date: July 17th, 2009
JF 0.1.66B Drive properties.
Vendor: PLDS
Name: DG-16D2S
F/W Rev: 8385
Reserved: 0CA0A2D609CG92781200
1) Chose "LO83info" in JF 1.66B
2) Opened drive, then close it about 7/10th of the way.
3) Turned off drive power, waited 10 seconds, turned on drive power. Waited another 10 seconds.
4) Chose OK to get pass the (screen about powering up with drive half open).
Screen requesting the drive to be in full open position comes up.
5) Press eject button to close the drive, and then again to open it fully. Waited 10 seconds.
6) Chose OK and getting error. This is happening regardless if I have "Dummy.bin Only" checked or not.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.66 Beta
Session Started Sat Oct 17 22:23:14 2009
This is a 32 bit process running on 2 x 32 bit CPUs
PortIO is installed and running.
Found 6 I/O Ports.
Found 2 Com Ports.
Found 5 windows drives C: D: F: G: I:
Found 1 CD/DVD drives I:
Sending LO83info request to I/O port 0xE480
............
.
0000: 00 00 00 00 00 00 00 00 - 49 6E 20 44 65 64 69 63 ........In Dedic
0010: 61 74 69 6F 6E 20 54 6F - 20 54 68 65 20 42 69 72 ation To The Bir
0020: 74 68 20 4F 66 20 4D 61 - 63 6B 61 79 20 4F 6E 20 th Of Mackay On
0030: 46 65 62 72 75 61 72 79 - 20 54 77 65 6C 76 65 20 February Twelve
0040: 32 30 30 37 20 FF FF FF - FF FF FF FF FF FF FF FF 2007 ...........
0050: FF FF FF FF FF FF FF FF - 4D 49 4B 45 20 4C 4F 56 ........MIKE LOV
0060: 45 53 20 48 45 4C 45 4E - BF 15 80 3D 03 09 06 FA ES HELEN...=....
LO83info extraction Failed!
|
AfterDawn Addict
2 product reviews
|
18. October 2009 @ 00:42 |
Link to this message
|
If you are getting the "In Dedication" string, you should be able to dump the key.
What type of SATA chipset are you using?
|
|
redbaboon
Newbie
|
18. October 2009 @ 01:05 |
Link to this message
|
Leerage,
I am using the onboard SATA II connectors on a XFX nFORCE 630I GEFORCE 7100 motherboard. It's worked for both the Hitachi and the older Liteons, just not the 82850C for some reason.
Notes from various forums usually show that if people can see the "In dedication..." message, the first phase of the dump passed and the 2nd phase for verify failed.
Is there a procedure that I am messing up?
|
AfterDawn Addict
2 product reviews
|
18. October 2009 @ 01:08 |
Link to this message
|
Originally posted by redbaboon:
Leerage,
I am using the onboard SATA II connectors on a XFX nFORCE 630I GEFORCE 7100 motherboard. It's worked for both the Hitachi and the older Liteons, just not the 82850C for some reason.
Notes from various forums usually show that if people can see the "In dedication..." message, the first phase of the dump passed and the 2nd phase for verify failed.
Is there a procedure that I am messing up?
I don't think you are messing up. Might just be a compatibility issue with the chipset.
Make sure you are:
Clicking LO83info
Eject tray
Shut off drive
Push in half way
Turn on drive
Click OK
Press eject to close
Press eject to fully open
Click ok
Repeat again
|
|
redbaboon
Newbie
|
18. October 2009 @ 01:12 |
Link to this message
|
|
Correction. Meant to type 83850C, not 82850C.
|
|
gameover9
Suspended permanently
|
18. October 2009 @ 01:13 |
Link to this message
|
yet people still don't get it. My opinion, if don't have a VIA chipset, don't waste your freaking time. I know $15 is pretty expensive.
|
|
Advertisement
|
|
|
|
redbaboon
Newbie
|
18. October 2009 @ 01:17 |
Link to this message
|
Thanks for verifying my steps.
Is there a SATA add-on PCI card that is known to work?
|
