|
|
|
Nero 6Ultra edition burn problem.
|
|
|
torrok
Suspended due to non-functional email address
|
11. July 2004 @ 11:14 |
Link to this message
|
|
I had a movie on .avi format. I used cucusoft video converter and Ifo edit to convert the movie to dvd pal format...this seemed to go ok no error messages. BUT when i tried to burn the converted files (following the instructions given in the cutusoft help guide) I got a error message 6 minutes or so into the burn process. Im a novice to this whole conceptg of converting and burning files, this is my first attempt I hope someone can point out what i have done wrong from the log below. Any help greatly appreciated. torrok
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
11. July 2004 @ 11:44 |
Link to this message
|
|
torrok, your burn log didn't get posted...At least I don't see it here... Are you going to post one?
|
|
torrok
Suspended due to non-functional email address
|
11. July 2004 @ 11:47 |
Link to this message
|
|
Sorry....im an idiot. lol
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.17
Recorder: <MATSHITA UJ-820D> Version: 1.00 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA UJ-820D >Version: 1.00 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJ-820D atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJ-820D F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 170MB (174224kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.7.2004
UDF/ISO compilation
00:17:59 #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
00:18:00 #2 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.IFO has been modified
00:18:00 #3 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.BUP has been modified
00:18:00 #4 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VTS_01_0.IFO has been modified
00:18:00 #5 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VTS_01_0.BUP has been modified
00:18:00 #6 Phase 113 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed
00:18:00 #7 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
00:18:00 #8 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
00:18:00 #9 Text 0 File Reader.cpp, Line 118
Reader running
00:18:00 #10 Text 0 File Writer.cpp, Line 124
Writer MATSHITA UJ-820D running
00:18:00 #11 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
00:18:00 #12 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
00:18:00 #13 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
00:18:07 #14 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1413200 (314:02.50, 2760MB)
00:18:07 #15 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
00:18:07 #16 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: MATSHITA UJ-820D, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
00:18:07 #17 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
00:18:07 #18 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1413200 (1413200) = #1413200/314:2.50
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1413200 blocks [MATSHITA UJ-820D ]
1: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (0) not provided
original disc pos #0 + 1 (1) = #1/0:0.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [MATSHITA UJ-820D ]
--------------------------------------------------------------
00:18:07 #19 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [MATSHITA UJ-820D ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2894233600, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 2894233600 2894233600 2894235648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1413200 | 2 | 0 | 0x00 | 0x41
1413200 | 2 | 1 | 0x00 | 0x41
1413201 | lead-out | 1 | 0x00 | 0x41
00:18:07 #20 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
00:18:07 #21 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
00:18:07 #22 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
00:18:07 #23 Phase 28 File dlgbrnst.cpp, Line 1845
Speed measurement started
00:18:07 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:18:07 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
00:20:32 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
00:20:38 #27 Text 0 File WriterStatus.cpp, Line 115
<MATSHITA UJ-820D > start writing Lead-Out at LBA 1 (1h), lenght 0 blocks
00:20:38 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
00:20:38 #29 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
00:20:38 #30 Phase 29 File dlgbrnst.cpp, Line 1796
Speed measurement completed: 14.4x (19,964 KB/s)
00:20:38 #31 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 2.4x (3,324 KB/s)
00:20:38 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:20:38 #33 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
00:20:38 #34 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
00:20:38 #35 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 15:03,394 (903394ms) -> OK
00:20:38 #36 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes
00:20:40 #37 Text 0 File Cdrdrv.cpp, Line 1294
00:20:40.769 - MATSHITA UJ-820D\H1 T0 : Queue again later
00:20:51 #38 Text 0 File Cdrdrv.cpp, Line 1294
00:20:51.194 - MATSHITA UJ-820D\H1 T0 : Queue again later
00:26:34 #39 SCSI -400 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03C50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x08 0x88 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x08 0x85 0x80 0x0A
0x00 0x2A 0x00 0x00 0x03 0x00
00:26:34 #40 CDR -400 File Writer.cpp, Line 304
Unspecified target error
00:26:34 #41 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
00:26:34 #42 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
00:26:35 #43 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
00:26:35 #44 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
00:26:35 #45 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 02/04/2004 22:32:20
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 24/06/2004 23:41:17 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 31/03/2003 13:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 11. July 2004 @ 12:02
|
AfterDawn Addict
|
11. July 2004 @ 11:59 |
Link to this message
|
The next thing u need to do is edit out your Nero registration code. The edit button is the pencil and paper icon on the orange bar, just above your post...
|
|
torrok
Suspended due to non-functional email address
|
11. July 2004 @ 12:04 |
Link to this message
|
|
hrmm hrmm...er...thanks!
|
AfterDawn Addict
|
11. July 2004 @ 12:16 |
Link to this message
|
|
I refreshed and it vanished like magic, LOL.
Its going to take a few mintes for me to go over the post but the first thing I noticed was this:
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
I always uncheck those.
Try unchecking those and then do a simulated burn and post the log from that. Right now it looks like your burner is not seeing the media when the write portion is beginning:
Unspecified target error
I'll look this log over some more and see if I can find anything else.
Edit: This looks odd too:
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
Those numbers are usually all zeros. This is data in the burst cutting area of the blank disc. Have you burned something on to this disc? All the blank media I use usually says "Data in Burst Cutting Area does not exsist".
This message has been edited since posting. Last time this message was edited on 11. July 2004 @ 12:24
|
|
torrok
Suspended due to non-functional email address
|
11. July 2004 @ 12:43 |
Link to this message
|
|
Its a dvd+rw disc (philips) there had been a movie on it at one time i think, but i ran erased everything on it before i used it, using the erase feature on roxio drag and drop whxich came with this laptop. Im doing the simulation now and will post the log asp. Thanks thus far. torrok
|
|
Veblin
Senior Member
|
11. July 2004 @ 12:52 |
Link to this message
|
|
It's a re-writable and has been used before. Did you do a full erase?
Drag to Disc, InCD and other packet writing software often causes mysterious burning problems. Disable or uninstall.
Nero and Roxio don't get along together for many people. Most choose Nero and get rid of Roxio.
Looking around the internet I see that unspecified target errors seem to be more often in laptop computer's so it may be heat related. I saw some claims that either letting the computer cool off or getting a laptop cooler solved this problem.
This message has been edited since posting. Last time this message was edited on 11. July 2004 @ 13:37
|
|
torrok
Suspended due to non-functional email address
|
11. July 2004 @ 12:53 |
Link to this message
|
|
Dont know what im doing wrong here now, I went into Nero and unchecked both boxes like you adviced c tried to click on simulate but it was greyed out. it would only let me click on simulate when i ticked the use multiple recorders box.....which i did and then got an error message....the log is below.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.17
Recorder: <MATSHITA UJ-820D> Version: 1.00 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA UJ-820D >Version: 1.00 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJ-820D atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJ-820D F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 190MB (194952kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.7.2004
UDF/ISO compilation
21:57:26 #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
21:57:26 #2 DVDREALLOC -124 File DVDVideoCompilation.cpp, Line 1177
21:57:26 #3 Phase 115 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation failed
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 02/04/2004 22:32:20
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 24/06/2004 23:41:17 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 31/03/2003 13:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 11. July 2004 @ 12:59
|
|
torrok
Suspended due to non-functional email address
|
11. July 2004 @ 13:11 |
Link to this message
|
|
Yes i did a full erase. I have now uninstalled roxio from my pc. If i find out why im getting this message about the files not being `reallocated` (whatever that means??) i`ll leave the laptop to cool then try burning again.
|
AfterDawn Addict
|
11. July 2004 @ 14:04 |
Link to this message
|
Well some burners aren't supported by Nero for doing simulations so that may be the problem as far as the greyed out sim box goes. I don't think you can erase stuff from the burst cutting area but give it a try...
You may want to try a different disc.
I sure don't want you to compound problems by trying to many things at once. That failiure to reallocate files may have been caused by selecting multiple recorders for the simulation, just guessing though. Nero could get confused when trying to send the files to non-exsistant recorders... possibly.
Veblin was right on about the Roxio, this may have been the cause of the original problem.
|
|
Veblin
Senior Member
|
11. July 2004 @ 14:11 |
Link to this message
|
roxizap.exe
This program will remove Roxio`s software completely.
WARNING: THIS PROCEDURE MIGHT CAUSE ANY OTHER ROXIO OR ADAPTEC SOFTWARE INSTALLED ON THE PC TO BECOME INOPERABLE. PLEASE UNINSTALL ANY OTHER ROXIO OR ADAPTEC SOFTWARE FIRST BEFORE ATTEMPTING.
http://softwareupdates.roxio.com/gm/support/tools/roxizap.exe
|
AfterDawn Addict
|
11. July 2004 @ 14:32 |
Link to this message
|
|
Nero has a disc info button avalible after you select the burn icon. You may want to take a look at that before proceeding with the burn. It will tell you if the disc is empty.
I tried a couple of simulated burns and was not able to make anything fail by checking the pathdepth and allow characters boxes. It did give me a warning that the disc may be unreadable under DOS/Windows 3.1X and then suggested that I uncheck the boxes.
|
|
torrok
Suspended due to non-functional email address
|
12. July 2004 @ 07:19 |
Link to this message
|
fasfrank and verblin just wanted to update you both and thank you for the advise. I succefully burned my converted AVI files onto the dvd-rw disc on a PAL format. Dont know what i did differently whether it was allowing the laptop to cool down before burning or whether removing Roxio drag to disc did the trick bottom line is today i had a succesful burn....Thanks guys. I included the succesful log details below, maybe you guys can see from it what contibuted to the success this time around. Bear in mind this is the first time ever i have burned anything....also first time ever i have converted files of any sort. Hopefully it wont be the last! Thanks again for your help.
Log.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.17
Recorder: <MATSHITA UJ-820D> Version: 1.00 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA UJ-820D >Version: 1.00 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJ-820D atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJ-820D F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 135MB (138880kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.7.2004
UDF/ISO compilation
15:09:57 #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
15:09:57 #2 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.IFO has been modified
15:09:57 #3 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.BUP has been modified
15:09:57 #4 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VTS_01_0.IFO has been modified
15:09:57 #5 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VTS_01_0.BUP has been modified
15:09:57 #6 Phase 113 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed
15:09:57 #7 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
15:09:57 #8 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
15:09:57 #9 Text 0 File Reader.cpp, Line 118
Reader running
15:09:57 #10 Text 0 File Writer.cpp, Line 124
Writer MATSHITA UJ-820D running
15:09:57 #11 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
15:09:57 #12 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
15:09:57 #13 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
15:09:58 #14 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1413200 (314:02.50, 2760MB)
15:09:58 #15 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
15:09:58 #16 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: MATSHITA UJ-820D, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
15:09:58 #17 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:09:58 #18 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1413200 (1413200) = #1413200/314:2.50
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1413200 blocks [MATSHITA UJ-820D ]
1: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (0) not provided
original disc pos #0 + 1 (1) = #1/0:0.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [MATSHITA UJ-820D ]
--------------------------------------------------------------
15:09:58 #19 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [MATSHITA UJ-820D ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2894233600, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 2894233600 2894233600 2894235648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1413200 | 2 | 0 | 0x00 | 0x41
1413200 | 2 | 1 | 0x00 | 0x41
1413201 | lead-out | 1 | 0x00 | 0x41
15:09:58 #20 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
15:09:59 #21 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
15:09:59 #22 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
15:09:59 #23 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 2.4x (3,324 KB/s)
15:09:59 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:09:59 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
15:09:59 #26 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
15:09:59 #27 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 15:03,394 (903394ms) -> OK
15:09:59 #28 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes
15:10:03 #29 Text 0 File Cdrdrv.cpp, Line 1294
15:10:03.175 - MATSHITA UJ-820D\H1 T0 : Queue again later
15:24:43 #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
15:24:57 #31 Text 0 File WriterStatus.cpp, Line 115
<MATSHITA UJ-820D > start writing Lead-Out at LBA 1 (1h), lenght 0 blocks
15:24:57 #32 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
15:25:00 #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
15:25:00 #34 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
15:25:00 #35 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 02/04/2004 22:32:20
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 24/06/2004 23:41:17 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 31/03/2003 13:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
12. July 2004 @ 18:52 |
Link to this message
|
|
Good for you torrok,
It is nice to see a successful bun log posted! I sure hope you can come back and help someone else or if you have questions we will be more than happy to answer them.
I think it was the Roxio causing the problems, Hopwever I have never seen this before:
15:09:57 #2 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.IFO has been modified
15:09:57 #3 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.BUP has been modified
15:09:57 #4 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VTS_01_0.IFO has been modified
15:09:57 #5 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VTS_01_0.BUP has been modified
That's about the only thing I see different from one of my burn logs.
Cheers,
Frank
|
|
torrok
Suspended due to non-functional email address
|
12. July 2004 @ 23:42 |
Link to this message
|
|
I have no clue as to what the `modification` message is in the log either Frank. I converted and burned the files based soley on the Help facility that came with Cutusoft Video Converter. I just followed the instructions, the technical details on how i actually achieved the desired result are way beyond this guy lol. Tell you what though, i have been reading through the forums here since i registered and the information that can be found just from reading the questions and answers is first class. I`ll be stopping by every day to read and you can bet money i`ll be posting again with some quiery or other, and maybe chipping in if i read where someone has encountered a similar problem to myself. Thanks again for your help.
PS. I just had a thought, dont know if this could result in the `modification` message. When i tried the simulated burn and got the message about `re allocation` I decided to delete the the contents of my VIDEO_TS file (incase i had screwed up that part of the process in some way) and go back a stage to where it says in the Cutusoft help section to use Ifo Edit " to generate the DVD structure(vob and ifo files) " I generated the files again and went from there. Thats when i got the successful burn. Maybe thats why the `modification` message? Just thought id add this info incase it helps anyone in future. torrok
|
|
IMyself
Newbie
|
13. July 2004 @ 04:42 |
Link to this message
|
I'm having something of a similar problem. Nero Ultra was burning absolutely fine. Last night, however, it stopped. I've got two error logs to show, and no idea what's wrong. I had roxio on here, but that wasn't causing any problems. I removed it (or so I thought) before installing the updated InCD. Nero still burnt after doing that, though, so I don't know what the problem is now.
First:
[21:35:57] NeroVision Properties of your project:
[21:35:57] NeroVision Aspect ratio: Automatic
[21:35:57] NeroVision Video mode: PAL
[21:35:57] NeroVision Quality: Automatic
[21:35:57] NeroVision Used disc space: 2.16 GB
[21:35:57] NeroVision Your project contains the following:
[21:35:57] NeroVision Number of titles: 1
[21:35:57] NeroVision 1. Title 1 (Video Title, 2h 32m 16s, 13 chapters)
[21:35:57] NeroVision Video mode: PAL
[21:35:57] NeroVision Aspect ratio: 4:3
[21:35:57] NeroVision Quality: Super long play (1691 kbps)
[21:35:57] NeroVision Resolution: 352 x 576 (Half D1)
[21:35:57] NeroVision Number of menus: 1
[21:35:57] NeroVision - Menu for Title 1 (4 pages)[21:35:57] NeroVision
[21:35:57] NeroVision Windows XP 5.1
[21:35:57] NeroVision IA32
[21:35:57] NeroVision WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 20:01:02
[21:35:57] NeroVision ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
[21:35:57] NeroVision Nero API version: 6.3.1.17
[21:35:57] NeroVision Using interface version: 6.3.1.11
[21:35:57] NeroVision Installed in: C:\Program Files\Ahead\Nero\
[21:35:57] NeroVision Application: ahead\NeroVision
[21:35:57] NeroVision === Scsi-Device-Map ===
[21:35:57] NeroVision DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
[21:35:57] NeroVision DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: Off
[21:35:57] NeroVision CdRomPeripheral : TOSHIBA DVD-ROM SD-R5112 atapi Port 1 ID 0 DMA: On
[21:35:57] NeroVision CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 1 DMA: On
[21:35:57] NeroVision === CDRom-Device-Map ===
[21:35:57] NeroVision TOSHIBA DVD-ROM SD-R5112 F: CDRom0
[21:35:57] NeroVision HL-DT-ST RW/DVD GCC-4480 E: CDRom1
[21:35:57] NeroVision =======================
[21:35:57] NeroVision AutoRun : 1
[21:35:57] NeroVision Excluded drive IDs:
[21:35:57] NeroVision WriteBufferSize: 74448896 (0) Byte
[21:35:57] NeroVision ShowDrvBufStat : 0
[21:35:57] NeroVision BUFE : 0
[21:35:57] NeroVision Physical memory : 510MB (523248kB)
[21:35:57] NeroVision Free physical memory: 181MB (185744kB)
[21:35:57] NeroVision Memory in use : 64 %
[21:35:57] NeroVision Uncached PFiles: 0x0
[21:35:57] NeroVision Use Static Write Speed Table: 0
[21:35:57] NeroVision Use Inquiry : 1
[21:35:57] NeroVision Global Bus Type: default (0)
[21:35:57] NeroVision Check supported media : Disabled (0)
[21:35:57] NeroVision 12.7.2004
[21:35:57] NeroVision NeroAPI
[21:35:57] NeroVision Existing drivers:
[21:35:57] NeroVision File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
[21:35:57] NeroVision File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 09:53:04
[21:35:57] NeroVision File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 30/07/2003 03:02:00 (Prassi/Veritas driver for win 2K)
[21:35:57] NeroVision File 'Drivers\InCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 13:57:34 (InCD4 driver for win NT/2K/XP)
[21:35:57] NeroVision File 'Drivers\InCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 13:57:52 (InCD4 driver for win NT/2K/XP)
[21:35:57] NeroVision File 'Drivers\InCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 13:59:24 (InCD4 driver for win NT/2K/XP)
[21:35:57] NeroVision Registry Keys:
[21:35:57] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Second:
[13:14:42] NeroVision Properties of your project:
[13:14:42] NeroVision Aspect ratio: Automatic
[13:14:42] NeroVision Video mode: PAL
[13:14:42] NeroVision Quality: Automatic
[13:14:42] NeroVision Used disc space: 1.54 GB
[13:14:42] NeroVision Your project contains the following:
[13:14:42] NeroVision Number of titles: 1
[13:14:42] NeroVision 1. Title 1 (Video Title, 1h 48m 01s, 10 chapters)
[13:14:42] NeroVision Video mode: PAL
[13:14:42] NeroVision Aspect ratio: 4:3
[13:14:42] NeroVision Quality: Super long play (1691 kbps)
[13:14:42] NeroVision Resolution: 352 x 576 (Half D1)
[13:14:42] NeroVision Number of menus: 1
[13:14:42] NeroVision - Menu for Title 1 (5 pages)[13:14:42] NeroVision
[13:14:42] NeroVision Windows XP 5.1
[13:14:42] NeroVision IA32
[13:14:42] NeroVision WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 20:01:02
[13:14:42] NeroVision ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
[13:14:42] NeroVision Nero API version: 6.3.1.17
[13:14:42] NeroVision Using interface version: 6.3.1.11
[13:14:42] NeroVision Installed in: C:\Program Files\Ahead\Nero\
[13:14:42] NeroVision Application: ahead\NeroVision
[13:14:42] NeroVision === Scsi-Device-Map ===
[13:14:42] NeroVision DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
[13:14:42] NeroVision DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: Off
[13:14:42] NeroVision CdRomPeripheral : TOSHIBA DVD-ROM SD-R5112 atapi Port 1 ID 0 DMA: On
[13:14:42] NeroVision CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 1 DMA: On
[13:14:42] NeroVision === CDRom-Device-Map ===
[13:14:42] NeroVision TOSHIBA DVD-ROM SD-R5112 F: CDRom0
[13:14:42] NeroVision HL-DT-ST RW/DVD GCC-4480 E: CDRom1
[13:14:42] NeroVision =======================
[13:14:42] NeroVision AutoRun : 1
[13:14:42] NeroVision Excluded drive IDs:
[13:14:42] NeroVision WriteBufferSize: 74448896 (0) Byte
[13:14:42] NeroVision ShowDrvBufStat : 0
[13:14:42] NeroVision BUFE : 0
[13:14:42] NeroVision Physical memory : 510MB (523248kB)
[13:14:42] NeroVision Free physical memory: 106MB (108832kB)
[13:14:42] NeroVision Memory in use : 79 %
[13:14:42] NeroVision Uncached PFiles: 0x0
[13:14:42] NeroVision Use Static Write Speed Table: 0
[13:14:42] NeroVision Use Inquiry : 1
[13:14:42] NeroVision Global Bus Type: default (0)
[13:14:42] NeroVision Check supported media : Disabled (0)
[13:14:42] NeroVision 13.7.2004
[13:14:42] NeroVision NeroAPI
[13:14:42] NeroVision Existing drivers:
[13:14:42] NeroVision File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
[13:14:42] NeroVision File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 09:53:04
[13:14:42] NeroVision File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 30/07/2003 03:02:00 (Prassi/Veritas driver for win 2K)
[13:14:42] NeroVision File 'Drivers\InCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 13:57:34 (InCD4 driver for win NT/2K/XP)
[13:14:42] NeroVision File 'Drivers\InCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 13:57:52 (InCD4 driver for win NT/2K/XP)
[13:14:42] NeroVision File 'Drivers\InCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 13:59:24 (InCD4 driver for win NT/2K/XP)
[13:14:42] NeroVision Registry Keys:
[13:14:42] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Help :(
|
|
Veblin
Senior Member
|
13. July 2004 @ 05:40 |
Link to this message
|
|
|
|
IMyself
Newbie
|
13. July 2004 @ 07:15 |
Link to this message
|
|
Thanks for that. No idea why its turning DMA off on one of the drives. It's set to auto detect. I'll uninstall InCD now and see if that helps, although it managed to burn no problem with that there until last night. :(
I've tried turning DMA back on, but it's not having it. I wonder if it's got something to do with WinXP SP2, as I installed that recently.
This message has been edited since posting. Last time this message was edited on 13. July 2004 @ 07:40
|
|
Veblin
Senior Member
|
13. July 2004 @ 09:26 |
Link to this message
|
|
You may have to check in your BIOS Setup and make sure that DMA is enabled for that and all device's. The link above also explains how if a device gets a certain number of errors DMA will be disabled. You should then right click on the drive in Device Manager and uninstall it and reboot. If you still can't get DMA you should right click on the IDE channel it is on and uninstall the IDE channel and reboot.
|
|
IMyself
Newbie
|
13. July 2004 @ 11:55 |
Link to this message
|
|
How do I tell which drive is which? One's my main HDD with my OS system. I don't want to uninstall that, do i?
(Spot the n00b ;) )
[13:14:42] NeroVision DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
[13:14:42] NeroVision DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: Off
|
|
Veblin
Senior Member
|
13. July 2004 @ 12:08 |
Link to this message
|
|
Your Primary Master is your Main HDD. I beleive it is the first one listed. You can find all this in the Device Manager. Yes you can uninstall drives and IDE channels and many other things because after you reboot Windows it will reinstall those devices for you. In some cases you have to reboot twice.
If Windows really needs it to operate it will put it back and will often fix whatever problem that device was having.
|
|
IMyself
Newbie
|
13. July 2004 @ 12:23 |
Link to this message
|
|
Thanks. Any idea what sort of errors would have made it switch off? By the look of it, the drive that's not on DMA is my secondary 120GB hdd, where all my avi files are. I have done a lot of stuff recently, and really need to defrag, (as I had to clear 25GBs of space on my main drive the other day). I also installed Winxp SP2 and updated Nero. Everything was fine until last night. Weird...
Alrighty....uninstalled the drive...didn't sort it. uninstalled the IDE controller...didn't work. Checked BIOS and discovered my secondary drive wasn't showing at all (even though I could access it through windows). So, turned that on to automatic detection and now it works. Testing to see if Nero works on a burn now, but don't hold out much hope. Still no idea why BIOS switched to OFF.
This message has been edited since posting. Last time this message was edited on 13. July 2004 @ 12:47
|
|
IMyself
Newbie
|
13. July 2004 @ 14:19 |
Link to this message
|
|
Nope, still not working. DMA hasn't been affected this time.
0:20:50] NeroVision Properties of your project:
[00:20:50] NeroVision Aspect ratio: Automatic
[00:20:50] NeroVision Video mode: PAL
[00:20:50] NeroVision Quality: Automatic
[00:20:50] NeroVision Used disc space: 1.54 GB
[00:20:50] NeroVision Your project contains the following:
[00:20:50] NeroVision Number of titles: 1
[00:20:50] NeroVision 1. Title 1 (Video Title, 1h 48m 01s, 10 chapters)
[00:20:50] NeroVision Video mode: PAL
[00:20:50] NeroVision Aspect ratio: 4:3
[00:20:50] NeroVision Quality: Super long play (1691 kbps)
[00:20:50] NeroVision Resolution: 352 x 576 (Half D1)
[00:20:50] NeroVision Number of menus: 1
[00:20:50] NeroVision - Menu for Title 1 (5 pages)
[00:20:50] NeroVision [00:20:50] NeroVision Windows XP 5.1
[00:20:50] NeroVision IA32
[00:20:50] NeroVision WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 20:01:02
[00:20:50] NeroVision ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
[00:20:50] NeroVision Nero API version: 6.3.1.17
[00:20:50] NeroVision Using interface version: 6.3.1.11
[00:20:50] NeroVision Installed in: C:\Program Files\Ahead\Nero\
[00:20:50] NeroVision Application: ahead\NeroVision
[00:20:50] NeroVision === Scsi-Device-Map ===
[00:20:50] NeroVision DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
[00:20:50] NeroVision DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: On
[00:20:50] NeroVision CdRomPeripheral : TOSHIBA DVD-ROM SD-R5112 atapi Port 1 ID 0 DMA: On
[00:20:50] NeroVision CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 1 DMA: On
[00:20:50] NeroVision === CDRom-Device-Map ===
[00:20:50] NeroVision TOSHIBA DVD-ROM SD-R5112 F: CDRom0
[00:20:50] NeroVision HL-DT-ST RW/DVD GCC-4480 E: CDRom1
[00:20:50] NeroVision =======================
[00:20:50] NeroVision AutoRun : 1
[00:20:50] NeroVision Excluded drive IDs:
[00:20:50] NeroVision WriteBufferSize: 74448896 (0) Byte
[00:20:50] NeroVision ShowDrvBufStat : 0
[00:20:50] NeroVision BUFE : 0
[00:20:50] NeroVision Physical memory : 510MB (523248kB)
[00:20:50] NeroVision Free physical memory: 195MB (200668kB)
[00:20:50] NeroVision Memory in use : 61 %
[00:20:50] NeroVision Uncached PFiles: 0x0
[00:20:50] NeroVision Use Static Write Speed Table: 0
[00:20:50] NeroVision Use Inquiry : 1
[00:20:50] NeroVision Global Bus Type: default (0)
[00:20:50] NeroVision Check supported media : Disabled (0)
[00:20:50] NeroVision 14.7.2004
[00:20:50] NeroVision NeroAPI
[00:20:50] NeroVision Existing drivers:
[00:20:50] NeroVision File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
[00:20:50] NeroVision File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 09:53:04
[00:20:50] NeroVision File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 30/07/2003 03:02:00 (Prassi/Veritas driver for win 2K)
[00:20:50] NeroVision Registry Keys:
[00:20:50] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 13. July 2004 @ 15:24
|
|
Advertisement
|
|
|
|
Veblin
Senior Member
|
13. July 2004 @ 16:33 |
Link to this message
|
I can't really make out anything else from those NeroVision Log's. It would be more helpful if you were to try burning your project with Nero Burning Rom. Then you will get a log like what torrok had above. I find those much easier to look at and find the problem because they give more information.
|
|
