|
Newbies: simple guide 'How to back up a movie'
|
|
|
mundokev
Newbie
|
17. November 2005 @ 01:29 |
Link to this message
|
No.... unfortunately, only DVD+R, DVD+R DL and DVD+RW can book type or bitsetting into a DVD-ROM format. Hope this will give you a clue now. I highly recommend for you to use DVD+R media and book typing them into DVD-ROM -- this is one of the best and safest way to go. It will play in all/any of your stand alone dvd players, it will even play in your Car's dvd player as well.
Honestly, I prefer any DVD+R (especially Taiyo Yuden, Verbatim and Maxell "made in japan") over any DVD-R because I can "automatically" book type them into DVD-ROM = play in all dvd players = longevity = free of worries.
However, the choice is yours to make/choose.
-------------------------------------------------
Thanks again alkohol
The reason I asked is that when I upgraded my drive from cd rw to a dvd rw dl I bought a batch of dvd -r and would now like to use them up by storing my digital photos on.
I can see the benefits of dvd +r after reading from this excellent website and your obvious expertise on this matter
I recall reading somewhere that if the booktype is set to dvd-rom it would ruin a dvd -r if burned and wondered if I had to change the booktype back to automatic or normal - either through Nero or decrypter
|
|
Advertisement
|
 |
|
|
Senior Member
|
17. November 2005 @ 02:10 |
Link to this message
|
This a very good guide alcohol...kudos. The only suggestion I can make is you can cut out the Nero burning rom part.....cause in recode it can burn to disc without saving to file. Just choose your burner and once its done...it will automatically burn.:>
epox mobo EP-9NPAJ
amd 3700+ san diego core oc to 2.50
antec true power 430 watt dual +12 volt rails @ 18 amps each
bfg geforce 6800 gt oc edition
dragon case
2 x 512 DUAL CHANNEL ELIXOR RAM
Ibm P260 dvi & vga 21 inch crt monitor 1600 x 1200 @ 85 htz Oh yeah!!
|
AfterDawn Addict
|
17. November 2005 @ 09:35 |
Link to this message
|
Quote:
I recall reading somewhere that if the booktype is set to dvd-rom it would ruin a dvd -r if burned and wondered if I had to change the booktype back to automatic or normal - either through Nero or decrypter
If you're talking about trying to book type a DVD-R into DVD-ROM, then yes... it's possible that it'll ruin the disc (or the process will likely to be failed), but then again, you can't book type a DVD-R anyways and it won't do any good. Only DVD+R, DVD+R DL and DVD+RW can book type.
|
|
mundokev
Newbie
|
17. November 2005 @ 09:50 |
Link to this message
|
|
Thanks again for that alkohol
The dawn is gradually breaking and I can see the light coming on
Checked dvddecrypter and the dvd-rom option has been retained for any dvd +r dl or dvd +r that I burn
I now see what you mean about trying to change the booktype if using dvd -r as it does not appear as an option
Cheers
|
|
swy000
Junior Member
|
17. November 2005 @ 16:50 |
Link to this message
|
hey,
i have another question if possible..
when i copied the 8GB movie i had to a single DVD +R DL with DVD Decrypter, what region is the new disc in? region free or depends on what the older disc was set to? is there any way of knowing...
thnx!
Sam
|
AfterDawn Addict
|
17. November 2005 @ 21:26 |
Link to this message
|
Quote:
Thanks again for that alkohol
The dawn is gradually breaking and I can see the light coming on
Checked dvddecrypter and the dvd-rom option has been retained for any dvd +r dl or dvd +r that I burn
I now see what you mean about trying to change the booktype if using dvd -r as it does not appear as an option
Cheers
@mundokev
No problem... and you're welcome. Now enjoy all your book typed DVD-ROM movies.
This message has been edited since posting. Last time this message was edited on 18. November 2005 @ 07:50
|
|
LUPILLO
Newbie
|
18. November 2005 @ 07:24 |
Link to this message
|
I THINK DVD FAB IT'S VERY EAZY TWO CLICKS AND DONE GO TO.... DVDIdle.com/dvd-fab-platinum.htm" class="korostus" target="_blank">http://www.DVDIdle.com/dvd-fab-platinum.htm GO ALL THE WAY TO THE BOTTOM WERE IT SAY'S FREE STUFF AND DOWNLOAD AND ENJOY 1 CLICK IT WILL COMPRESS IT TO FIT A 4.7GB DVD+R AND WHEN DONE IT WILL ASK YOU TO PUT A BLANK DISC AND CLICK AGAIN AND DONE YUST TWO EAZY CLICK'S AND VERY FAST LESS THAN 1 HOUR WILL COMPRESS IT AND COPY ALL ENTIRE DVD MOVIE WILL COPY ANY DVD ON THE MARKET AND THEY UPDATE EVERY WEEK OUR TWO THAT'S 1 BAD ASS PROGRAM TO USE BETTER THAN DVD X COPY PLATINUM?
|
|
DADEO1
Member
|
18. November 2005 @ 11:52 |
Link to this message
|
|
ALL I CAN SAY IS "FABULOUS"! A TON OF HELP.
|
|
teachme
Suspended due to non-functional email address
|
19. November 2005 @ 23:18 |
Link to this message
|
THANKS I AM ALMOST THEIR. I DOWNLOADED Nero 7 DEMOAND GOT LOST AFTER RECORDING AND BURNING. I BELIEVE I FOLLOWED ALL YOUR DIRECTIONS TILL I HAD TO GO IN Nero (TO BURN YOUR MOVIE OR VIDEO_TS USING Nero BURNING ROM. I COULD NOT FIND THAT WINDOW. THE Nero I DOWNLOADED DONOT HAVE THAT APPLICATION WINDOW NOR COULD I FIND Nero BURNING ROM. I DID FINISH Nero RECODE THATS DONE. NOW I NEED TO RETRIEVE THE FILE TO BURN. YOU HAVE BEEN A GREAT HELP FOR ALL NEWBIES!!!!!!!!! TEACHME THANKS YOU
|
AfterDawn Addict
|
20. November 2005 @ 22:52 |
Link to this message
|
Quote:
THANKS I AM ALMOST THEIR. I DOWNLOADED Nero 7 DEMOAND GOT LOST AFTER RECORDING AND BURNING. I BELIEVE I FOLLOWED ALL YOUR DIRECTIONS TILL I HAD TO GO IN Nero (TO BURN YOUR MOVIE OR VIDEO_TS USING Nero BURNING ROM. I COULD NOT FIND THAT WINDOW. THE Nero I DOWNLOADED DONOT HAVE THAT APPLICATION WINDOW NOR COULD I FIND Nero BURNING ROM. I DID FINISH Nero RECODE THATS DONE. NOW I NEED TO RETRIEVE THE FILE TO BURN. YOU HAVE BEEN A GREAT HELP FOR ALL NEWBIES!!!!!!!!! TEACHME THANKS YOU
@teachme
If you downloaded the latest Nero 7, you should have "Nero Burning Rom" on it. That sounds kind of strange, but I remembered after I downloaded Nero 7 Demo and during installation, I just put in my key on it and everything/all the applications seems to be in there so far. Perhaps, you may want to "uninstall" Nero (if only you still have the Nero 7 Demo Setup.exe file) and "reinstall" everything back on to see if you'll have everything this time. You may need "Nero's General Clean Tool" to completely wipe out any of Nero's related files/applications, then run the installation setup again. *NOTE: remember "DON'T" install any of "InCD" with your Nero now.
Here is a picture from mine, for reference:
|
|
teachme
Suspended due to non-functional email address
|
25. November 2005 @ 13:30 |
Link to this message
|
where can I get Nero 6 download free withput filling out alot of junk mail
|
Moderator
|
25. November 2005 @ 13:59 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Newbie
|
25. November 2005 @ 18:19 |
Link to this message
|
|
never mind-edit-
Money kills you....Kills all that is human inside of you...
This message has been edited since posting. Last time this message was edited on 25. November 2005 @ 18:21
|
AfterDawn Addict
|
25. November 2005 @ 19:05 |
Link to this message
|
Quote:
where can I get Nero 6 download free withput filling out alot of junk mail
@teachme
Just follow the link that Creaky provided and you'll be fine.
|
|
hockeyfan
Junior Member
|
25. November 2005 @ 19:15 |
Link to this message
|
|
ok I did everything you said and followed the instructions word for word and picture for picture haha and surprisingly it got to 80% before I got this...
DVD Shrink encountered an error and cannot continue
Failed to write file "C:\WAR_OF_THE_WORLDS\VTS_04_3.VOB"
Data error (cyclic redundancy check)
It always happens to me during encoding. My DVD player plays movies fine so I doubt its a dirty laser, but I just dont know what to do anymore. Maybe my days of burning DVD's finally caught up to me :( Is it possible that the version of Shrink I am using is corrupt? Maybe some Decrypter settings are interfering with Shrink? Please help. Sorry for being such a pain in the @$$ :)
This message has been edited since posting. Last time this message was edited on 25. November 2005 @ 19:16
|
AfterDawn Addict
|
25. November 2005 @ 19:24 |
Link to this message
|
Quote:
Data error (cyclic redundancy check)
@hockeyfan
That usually mean the original disc is dirty, scratches or is a bad press. Did you have DVD Decrypter ripped using File Mode sucessfully into your hard drive first? Then Open Files via DVD Shrink or (Import DVD if you're going to use Nero Recode 2).
Seriously, War Of The Worlds is "not" that hard at all. I just burned it yesterday using DVD Decrypter via File Mode to rip into my hard drive successfully. Then I have Nero Recode 2 to do "Advanced Analysis" and burned it with Nero Burning Rom.
|
AfterDawn Addict
|
25. November 2005 @ 19:28 |
Link to this message
|
Quote:
DVD Shrink encountered an error and cannot continue
Failed to write file "C:\WAR_OF_THE_WORLDS\VTS_04_3.VOB"
Data error (cyclic redundancy check)
For some reason, I'll try to use DVD Shrink and see what's wrong with it and I'll report back alright.
*NOTE: I did successfully "encode" with Nero Recode 2 last night already though.
|
AfterDawn Addict
|
25. November 2005 @ 23:52 |
Link to this message
|
@hockeyfan
I don't know why you're getting error using DVD Shrink, but I've just encoded another backup for myself using DVD Shrink and it went smoothly without any issues whatsoever. Below is the method I used and it successfully rip from DVD Decrypter via File Mode, then I have DVD Shrink set on "Deep Analysis" with "Maximum Sharpness" on the quality, which it took 2 passes (again, I still prefer Nero Recode 2 because Nero Recode 2 is much faster). Finally, I burned it with Nero Burning Rom -- overall, it's flawless.
|
|
JeffCobra
Newbie
|
28. November 2005 @ 05:35 |
Link to this message
|
Ran in to an interesting problem attempting to backup "Garfield" for my 2 year old (who ruins disks at a high-rate of speed). When I ran DVD Decrypter, it failed shortly after it started with the following error:
"Brute Force Cracking Failed!"
Reason: "There were no vulnerable blocks"
The file was VTS_020_0.VOB
I've run in to this a couple of times. Am I doing something wrong?
Jeff
|
AfterDawn Addict
|
28. November 2005 @ 08:29 |
Link to this message
|
Quote:
Ran in to an interesting problem attempting to backup "Garfield" for my 2 year old (who ruins disks at a high-rate of speed). When I ran DVD Decrypter, it failed shortly after it started with the following error:
"Brute Force Cracking Failed!"
Reason: "There were no vulnerable blocks"
The file was VTS_020_0.VOB
I've run in to this a couple of times. Am I doing something wrong?
Jeff
@JeffCobra
Just click Yes and continue or Skip and you'll be fine.
"Brute Force Cracking Failed!"
Reason: "There were no vulnerable blocks"
The file was VTS_020_0.VOB meaning there is no VTS blocks, VTS cell or bad sectors for Brute Force to be cracked that's all.
|
|
icess426
Newbie
|
5. December 2005 @ 14:09 |
Link to this message
|
What version of Nero are you using and how do I get the updated version. The version that I have do not have "Nero Recode" on the main menue, it stop at "Nero ImageDrive". Please Help
|
Newbie
|
8. December 2005 @ 11:45 |
Link to this message
|
|
were can i download all of these progams?
~rem~
|
|
micalj
Newbie
|
8. December 2005 @ 15:38 |
Link to this message
|
|
Dear alkohol thanks in advance for all your work explaining the use of Dvd decryper. I followed the instructions exactly. I have been trying to make a copy of a Hanna Barbara Yogi Bear disk for my grandson. It has multiple episodes on it. The Problem: All works find until it gets to the last file. I get a read error and it keeps trying an infinate number of times and won't finish. Can you help me with a solution.
micalj
|
|
teachme
Suspended due to non-functional email address
|
8. December 2005 @ 17:15 |
Link to this message
|
|
I was out of town. To answer your reply NO I do not have Burning Rom application. Since I've been back I downloaded Nero 6.6.0.18 (creaky) said that was free. Went under applications and it still is not there there is only 5 windows to go in (all start with Nero-Express, N-Vision Expree SE, N-Cover Designer, N-Show Time, N- Media PLayer and once again I look at your Nero application and I see 12 windows. Do I have to but it to get all 12????
This message has been edited since posting. Last time this message was edited on 8. December 2005 @ 17:18
|
|
Advertisement
|
|
|
AfterDawn Addict
|
8. December 2005 @ 18:55 |
Link to this message
|
@teachme, icess426 & red13th
This is what you guys need to do: (a) write down your Nero 6 serial key. (b) download "Nero's General Clean Tool" from Nero's website to completely clean your old version of Nero 6 - go here http://www.nero.com/nero6/enu/General_CleanTool.html and run it to clean all of Nero's product. (c) now go back to Nero website and download the latest from Nero 6 Ultra Edition (remember to get Package #1 & Package #2 only).
(d) once it's successfully completed, just reinstall and put your Nero 6 serial back on.
That's it!! Let me know how you guys doing and I'll try my best to help out as much as I can alright.
This message has been edited since posting. Last time this message was edited on 8. December 2005 @ 18:55
|
