|
Newbies: simple guide 'How to back up a movie'
|
|
AfterDawn Addict
|
28. December 2005 @ 02:53 |
Link to this message
|
Quote:
Thanks again for the clear instructions. However, I came accross a problem again during VOB VTS_08 process using VobBlanker. It said "Error reading input VOB: Unsynchronized". Do you have any suggestions? Thanks in advance
@z3n
You shouldn't be getting any "unsynchronized" errors at all when using either DVD Decrypter to rip the movie via Mode, File F or DVDFAB Decrypter to rip the movie into hard drive first. Once that process is completed, then just follow the mini guide above and you should be fine.
I've just did another tested on a new backup earlier today for my brother with the same method as provided above and it went through smoothly. So I can't tell you why you're getting errors. Worst case senario is to uninstall DVD Decrypter, DVDFAB Decrypter and VobBlanker and reinstall them back on and try it again.
By the way, did you have DVD Decrypter settings set to what I have on the very first page in prior to the ripping part? Try that and give it another shot. If DVD Decrypter failed, then try to rip it with DVDFAB Decrypter and just "BLANK" those "PGCs", then "PROCESS" as mentioned from the mini guide and you'll be fine.
|
|
Advertisement
|
 |
|
|
|
z3n
Newbie
|
28. December 2005 @ 10:45 |
Link to this message
|
Sorry to bother you again, I've tried to uninstall and install DVD Decrypter again, followed the exact settings, but it still doesn't work. I've noticed however, when I ran DVD Decrypter, right about VTS_08 there were many "Pack header not found"s, is that the cause of the problem? If I was to use DVDFab Decrypter, is there certain settings I should do? Thanks alkohol
"You know the world is going crazy when the best rapper is a white guy, the best golfer is a black guy, the tallest guy in the NBA is Chinese, the Swiss hold the America's Cup, France is accusing the U.S. of arrogance, Germany doesn't want to go to war, and the three most powerful men in America are named 'Bush', 'Dick', and 'Colon'." - Chris R.
|
AfterDawn Addict
|
28. December 2005 @ 11:17 |
Link to this message
|
At what Mode did you ripped with DVD Decrypter? I recommend using Mode, File F to rip. Yes, you can rip it with DVDFAB Decrypter and use the mini guide on VobBlanker to "blank out" PGC 2, PGC 3, PGC 4, and PGC 5" then click PROCESS. And no.... there's no special settings in DVDFAB Decrypter, just rip it. and open up VobBlanker, then follow the guide process. Let me know what's the results.
|
|
Pooch1624
Newbie
|
28. December 2005 @ 13:08 |
Link to this message
|
alkohol or anyone- When i am using Nero burning rom to burn VIDEO_TS files to a disc, there is no option in the top left corner to switch to DVD. All it gives me is the CD option. I have Nero 6.6.0.18 so if u could help that would be great. Thanks
|
Senior Member
|
28. December 2005 @ 14:07 |
Link to this message
|
If no option for dvd then Nero didnt detect a dvd burner. Thus ya dont have a dvd burner in ya comp only a cd writer.:>
epox mobo EP-9NPAJ
amd 3700+ san diego core oc to 2.50
antec true power 430 watt dual +12 volt rails @ 18 amps each
bfg geforce 6800 gt oc edition
dragon case
2 x 512 DUAL CHANNEL ELIXOR RAM
Ibm P260 dvi & vga 21 inch crt monitor 1600 x 1200 @ 85 htz Oh yeah!!
|
|
Pooch1624
Newbie
|
28. December 2005 @ 15:18 |
Link to this message
|
|
ozzy- then can i download a dvd burner or do i have to buy one?
|
|
z3n
Newbie
|
28. December 2005 @ 15:51 |
Link to this message
|
I've finally got "Madagascar" BACKED-UP using DVDFab Decrypter & Nero. MY GAWD. I must've put a good 10 hrs into it. Thanks for everything alkohol. Happy Holidays man!
*sent alkohol a bottle of Henny* =)
"You know the world is going crazy when the best rapper is a white guy, the best golfer is a black guy, the tallest guy in the NBA is Chinese, the Swiss hold the America's Cup, France is accusing the U.S. of arrogance, Germany doesn't want to go to war, and the three most powerful men in America are named 'Bush', 'Dick', and 'Colon'." - Chris R.
|
|
Pooch1624
Newbie
|
28. December 2005 @ 18:00 |
Link to this message
|
|
mmmmmm i dont know if that ad is for me but i dont know what it is. anyways i dont have a dvd burner on my computer apparently so i need to get one and would like the best and cheapest(perhaps free) way to get one. thanks
|
AfterDawn Addict
|
28. December 2005 @ 20:41 |
Link to this message
|
Quote:
I've finally got "Madagascar" BACKED-UP using DVDFab Decrypter & Nero. MY GAWD. I must've put a good 10 hrs into it. Thanks for everything alkohol. Happy Holidays man!
*sent alkohol a bottle of Henny* =)
@z3n
You're welcome, glad I could help. It only took me less than an hr to have a successfully working backup of "Madagascar".
Happy Holidays!!
|
AfterDawn Addict
|
28. December 2005 @ 20:44 |
Link to this message
|
Quote:
mmmmmm i dont know if that ad is for me but i dont know what it is. anyways i dont have a dvd burner on my computer apparently so i need to get one and would like the best and cheapest(perhaps free) way to get one. thanks
@Pooch1624
Are you serious? You need to buy a dvd burner and in order for you to properly backup dvds, you need to have at least one dvd burner and another dvd-rom drive will be useful.
This message has been edited since posting. Last time this message was edited on 28. December 2005 @ 20:45
|
|
Bcriptic
Suspended due to non-functional email address
|
29. December 2005 @ 05:46 |
Link to this message
|
What version Nero has the Recode???
Or where can I snag a copy of it???
My Nero doesn't have it... :o{
Peace, Love & Naked Bunnies
|
|
mattp9989
Newbie
|
29. December 2005 @ 09:55 |
Link to this message
|
|
Great Guide Alkohol!! After numerous attempst with other guides I think I am this close to burning!! So right at the end I am stuck. You see I cant seem to change my burner to book type DVD-Rom. I have burned a disc succesfully but the problem is that my stand alone dvdplayer reads this as files and doesnt load like a true dvd. I am assuming that if i change the book type then all will be well? I have a new Dell system (cant afford custom made!!) with a dvd burner that they call
HL-DT-ST DVD+-RW GWA4164B. Does this identify the type of burner I have? Can you help with how to change the book type? I truly appreciate it!!!
|
AfterDawn Addict
|
29. December 2005 @ 12:39 |
Link to this message
|
Quote:
Great Guide Alkohol!! After numerous attempst with other guides I think I am this close to burning!! So right at the end I am stuck. You see I cant seem to change my burner to book type DVD-Rom. I have burned a disc succesfully but the problem is that my stand alone dvdplayer reads this as files and doesnt load like a true dvd. I am assuming that if i change the book type then all will be well? I have a new Dell system (cant afford custom made!!) with a dvd burner that they call
HL-DT-ST DVD+-RW GWA4164B. Does this identify the type of burner I have? Can you help with how to change the book type? I truly appreciate it!!!
@mattp9989
You'll need to burn with a high quality DVD+R (Yuden, Maxell (mij) or Verbatim) in order for your burner (or Nero) to have a successfully "book typed" into DVD-ROM. You can not use any DVD-R or DVD-RW and have Nero or your drive book typed, it won't work that way. With "bitsettings" or "book typing" DVD+R into DVD-ROM, any/all functional standalone dvd players should be able to read/play the backup easily.
Honestly, I really don't know how you managed to have a successfully burned, but your standalone dvd player read it as files and not as dvd? I guess you could try to burn with a DVD+R media on your next burn and hopefully it'll book type into DVD-ROM.
According, to "club.cdreaks.com" it shows that your burner is an OEM LG, but unfortunately LG doesn't have any "firmware" to support the drive. So your best bet is head to "dell support" and ask them if there is any current "firmware" to update on your burner.
However, I do believe that your dvd burner (HL-DT-ST DVD+-RW GWA4164B) does support "book type" automatically, once you're using a DVD+R to burn. Go here http://club.cdfreaks.com/showthread.php?t=155355 and here (Dell forum) http://forums.us.dell.com/supportforums/board/message?board.id=di...
Good luck!!
|
|
tempdvd
Newbie
|
31. December 2005 @ 09:02 |
Link to this message
|
Hi Alkohol,
I just follow exactly these steps to rip my DVD with DVD Decrypter. When I try to use Nero Recode 2 to import the file, it just pop up this msg, do you know what I am doing wrong? thanks.
MSG: Nero Recode 2 encountered an error and cannot continue. An internal erro occurred. A VOBU address is out of bounds. This may be caused by an in valid DVD navigation structure.
|
AfterDawn Addict
|
31. December 2005 @ 10:25 |
Link to this message
|
@tempdvd
What movie are you trying to encode/transcode with Nero Recode 2 (or that you were having trouble)? At what Mode did you have DVD Decrypter ripped/decrypted? I recommend using Mode, File F to rip into the hard drive first.
Keep in mind that some of the newer movies (such as Madagascar, The Brothers Grimm, Stealth, Sky High, Valaint, The Great Raid, ect.) had the current Macrovision RipGuard and Sony's ARccOS, so you'll need VobBlanker to process and filter out thost bad/protected sectors. Once VobBlanker is done you can import into Nero Recode 2 and continue on using the guide.
Let me know what movie you're having trouble with and I'll see what I can do to help out alright.
|
|
tempdvd
Newbie
|
31. December 2005 @ 15:10 |
Link to this message
|
|
All the setting I have make just exactly what showes on your guide.
It's The Matrix, I am ripping the first disc of the 10 DVDs boxset.
Thanks a lot!
|
AfterDawn Addict
|
31. December 2005 @ 19:21 |
Link to this message
|
|
You shouldn't have any problems ripping Matrix at all.
|
|
GJVath
Suspended due to non-functional email address
|
1. January 2006 @ 15:40 |
Link to this message
|
|
Thanks for teh Great guide alkohol
|
|
J66
Junior Member
|
2. January 2006 @ 01:08 |
Link to this message
|
|
Alkohol, your guides are great, just one question regarding VobBlanker with the newer discs: After ripping with Decrypter, can you just "process/filter" through VobBlanker then use Shrink/Recode? Or are there some times when you have to "blank" specific PGC's? I see people just "processing" and others "blanking", so I was hoping that you could set me straight. By the way VobBlanker is amazing for editing out trailers and "junks" like you stated. Saves mucho space...Thank you...
|
|
J66
Junior Member
|
2. January 2006 @ 01:12 |
Link to this message
|
|
Alkohol, Oh yeah, are there any things when using VobBlanker to save space that I should be REALLY careful about editing out of original discs that could affect the final backup? Thanks again...
|
AfterDawn Addict
|
2. January 2006 @ 01:32 |
Link to this message
|
hi there alkohol
i just read all this thread - wow
some brilliant stuff in here... but i have a question for you, will the new AnyDVD come with the new protections sorted out? so you wont need the vobBlanker part just rip with DvdD then shrink it and burn?
thx...
Nothing here to see, move along folks.
 |
AfterDawn Addict
|
2. January 2006 @ 07:43 |
Link to this message
|
Quote:
Alkohol, your guides are great, just one question regarding VobBlanker with the newer discs: After ripping with Decrypter, can you just "process/filter" through VobBlanker then use Shrink/Recode? Or are there some times when you have to "blank" specific PGC's? I see people just "processing" and others "blanking", so I was hoping that you could set me straight. By the way VobBlanker is amazing for editing out trailers and "junks" like you stated. Saves mucho space...Thank you...
@J66
Honestly, to answer your question, if you just "process and filter" through VobBlanker, then most likely 95% - 100% you'll have successful backup (I may be wrong though because I'm not a VobBlanker guru - I wish I am, but I have decent knowledge with VobBlanker and have been using for a while). On the other hand, if you know which PGCs/TTNs or Cells (reference from PgcEdit combo with PSL Plugin) to "BLANK" out, then you'll have a successful backup 100% after VobBlanker completed the processing.
Yes, I definitely agree that VobBlanker is good to "edit, cut, preview and blank out" any junks that you don't needed ie trailers, previews, FBI warnings, commentary, etc.
|
AfterDawn Addict
|
2. January 2006 @ 08:06 |
Link to this message
|
Quote:
hi there alkohol
i just read all this thread - wow
some brilliant stuff in here... but i have a question for you, will the new AnyDVD come with the new protections sorted out? so you wont need the vobBlanker part just rip with DvdD then shrink it and burn?
thx...
@Rotary
Again, honestly in my opinion, NO. If you have the latest AnyDVD you shouldn't have to worry. I know AnyDVD is keen for cracking encrypted protections, it is arguably one of the greatest cracking engine at this very moment. Ironically, on few occasion, I've seen very few members that has AnyDVD running, but failed to backup a few of the latest dvd movies released.
Believe it or not, I still don't have (haven't use) AnyDVD yet. I ripped all of my dvd movies with either DVD Decrypter or DVDFAB Decrypter, and so far it has never let me down. Maybe in the near future, when both DVD Decrypter and DVDFAB Decrypter can no longer decrypt any of the newer encrypted protections (or protected sectors), then for sure I'll look into AnyDVD.
Cheers now!!
This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 08:07
|
|
Bcriptic
Suspended due to non-functional email address
|
3. January 2006 @ 06:10 |
Link to this message
|
Anyone???
What version Nero has the Recode???
Or where can I snag a copy of it???
My Nero doesn't have it... :o{
Peace, Love & Naked Bunnies
|
|
Advertisement
|
|
|
|
J66
Junior Member
|
3. January 2006 @ 13:28 |
Link to this message
|
Recode 2 is on the newest Nero update 6.6.0.18(which I use all the time). Just released in November and available from Nero's website. It's also in Nero 7...
|
