|
AnyDVD 5900 Beta!
|
|
|
zebadee
Member
|
9. February 2006 @ 12:17 |
Link to this message
|
Hi,
Just the thing for some, see below.
http://sandbox.slysoft.com/SetupAnyDVD5900.zip
The password for the zip archive is "ripper" (without the quotation marks).
For those who don't know if they should try the beta version, here is the changelog:
5.9.0.0, 2006 02 09
- Important: When installing this version over an existing
installation, you must reboot your machine. Otherwise the changes
made in the AnyDVD device driver will not have any effect!
- New: Added workaround for DVDShrink / Nero Recode "Out of memory"
error when copying Macrovision RipGuard protected discs with
menus, e.g. "Madagascar" R1 (US)
- New: Error zones on RipGuard/Arccos/PuppetLock protected titles are
now replaced with "valid material". 3rd party tools like DVDDecrypter
will now work better (no more "Pack Header Error" messages - another try,
this time it should really work).
- Note: To use DVDDecrypter with AnyDVD set I/O Model to SPTI or ElbyCDIO.
Set CSS Cracking method to none. Disable checking for structure
protection.
- New: Added "AnyDVD Ripper". This little tool repairs defective DVDs
while copying them to your harddisk. It can be started from the menu of
the AnyDVD fox icon.
It is identical to FixVTS (http://www.videohelp.com/~FixVTS/) but instead
of fixing problems "in place" it copies the files to your harddisk directly
from the source DVD. It fixes the problems while the files are copied.
Some DVDs which have severe mastering defects e.g.,
"Menace II Society" R1 (US) can now be copied with all DVD copy tools
(elby CloneDVD, DVDShrink, etc.) Many thanks to the author of FixVTS!
"AnyDVD Ripper" is a tool intended as a "last resort". It is not
beautiful, and some of its messages cannot be localized yet.
- Fix: Hang after update check with some system configurations
__________________
Thanks to James et al at slysoft
|
|
Advertisement
|
 |
|
|
Senior Member
3 product reviews
|
10. February 2006 @ 00:59 |
Link to this message
|
|
thanx for that, i just found out about it about 1 hour before i read your post...
thanx for4 the info.
"Its so hard to try to be different..."-Apocalypse Hoboken |
Senior Member
|
10. February 2006 @ 17:19 |
Link to this message
|
|
any feedback on this version yet?
Latest AnyDVD to rip > VOBB to blank the unwanted on a DVD > Shrink to compress > ImgBurn to burn = Never starting a thread asking how to backup a movie
|
Senior Member
|
11. February 2006 @ 07:11 |
Link to this message
|
|
Interested in feedback as well...
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD. |
AfterDawn Addict
|
11. February 2006 @ 07:34 |
Link to this message
|
i have been using AnyDVD 5900 since the beta came out,i have experienced no problems.on any test movie i tried..
|
Senior Member
|
11. February 2006 @ 11:10 |
Link to this message
|
|
Did you "tweak" DVDDecrypter as suggested?
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD. |
AfterDawn Addict
|
11. February 2006 @ 11:47 |
Link to this message
|
teflonmyk
this is the tweak i had it set for Decrypter for a long time ago
To use DVD Decrypter in conjunction with AnyDVD as stated by Olli ->
Proceed to the DVD Decrypter Opening Page - Tools - Settings
I/O Tab - Click on "Elby CDIO-Elaborate Bytes"
General Tab - un-check "Check For Structure Protection"
or use it this way,as the updated said
Note: To use DVDDecrypter with AnyDVD set I/O Model to SPTI or ElbyCDIO.
Set CSS Cracking method to none. Disable checking for structure
protection.
note: been using CloneDVD when there was no AnyDVD..i have every update they but out.and the same with anydvd
cheers
|
Senior Member
|
11. February 2006 @ 14:21 |
Link to this message
|
Just outta curiosity, what would happen if you DIDN'T tweak Decryptor with the new AnyDVD (or any other previous version).
Latest AnyDVD to rip > VOBB to blank the unwanted on a DVD > Shrink to compress > ImgBurn to burn = Never starting a thread asking how to backup a movie
|
Senior Member
|
11. February 2006 @ 15:04 |
Link to this message
|
Good to see Slysoft found a way around Menace II Society. A lot of people were having problems with it. You can create a direct ISO file with DVD Decrypter that will fit on a single layer disc, but so many people are used to using other apps, so doing this didn't accur to a lot of people, myself included.
My DVD Arsenal: BenQ DW1650 Drive, Plextor DVDRW PX-740A Drive, Nero 6.6.0.13, AnyDVD 6.1.8.4, CloneDVD2 2.9.1.2, DVD Shrink 3.2, DVD Decrypter 3.5.4.0, DVDFab HD Decrypter 3.2.1.0, VobBlanker 2.1.3.0, RipIt4Me 1.7.1.0, FixVTS 1.6.0.3
Proud PS3 owner! PS3 games currently owned: Fight Night Round 3, Heavenly Sword, Madden 07, Marvel Ultimate Alliance, Motorstorm, NHL 07, Resistance: Fall Of Man, Tony Hawk's Project 8 |
AfterDawn Addict
1 product review
|
11. February 2006 @ 20:31 |
Link to this message
|
|
@Mr_Pink
I am assuming that if you don't "tweak" DVDD, then you would have both programs trying to work on the same files and conflict...like LOCOENG once said, "too many cooks in the kitchen"
|
|
aabbccdd
Suspended permanently
|
11. February 2006 @ 22:01 |
Link to this message
|
have any of you guys been getting an message like this with the new beta verison of AnyDVD?? this has happened on two or three dvds now
it seem to backup the dvd fine though
|
AfterDawn Addict
1 product review
|
11. February 2006 @ 22:06 |
Link to this message
|
|
@aabbccdd
LOL! I look at that picture, and really ,I see no error in her:~)!
|
Member
|
11. February 2006 @ 22:16 |
Link to this message
|
|
What message, I can't see any message :0
|
|
aabbccdd
Suspended permanently
|
11. February 2006 @ 22:34 |
Link to this message
|
LOL guys we all know Adriana is perfect but look at the AnyDVD warning not her heheh
|
AfterDawn Addict
1 product review
|
11. February 2006 @ 22:51 |
Link to this message
|
The only warning that i see is "be careful, you're drooling on the keyboaard"!:~)!
Where is AnyDVD, again?
|
Senior Member
3 product reviews
|
12. February 2006 @ 05:04 |
Link to this message
|
@aabbccdd,
I haven't use the Beta Version, BUT, I HAVE seen this message before a while back. I went ahead & set my region on my reader drive & this message has never re-appeared. It is weird because AnyDVD make the disc region free, but that is all I did to make the message go away.
By the way, Yep, Adriana is HOT.
Use The Best Media for The Best Burns! TYs, Verbs,(Made in Taiwan) Sony MIJs (YUDEN000 T02), Sony Made in Taiwan DVD+R 16x, Maxell MIJ, RITEK G05.
|
Senior Member
|
12. February 2006 @ 06:51 |
Link to this message
|
It's funny i just got that message last night--but it's with the 5.8.4.1 version. It was an old DVD too, WWE: The Monday Night War. But I went around it. I disabled AnyDVD, ripped it with decryptor, ran it through VOB, Shrink to compress and then Decryptor to burn. Worked like a charm. Plus, it was my first Taiyo Yuden burn--woohoo!
Latest AnyDVD to rip > VOBB to blank the unwanted on a DVD > Shrink to compress > ImgBurn to burn = Never starting a thread asking how to backup a movie
|
|
aabbccdd
Suspended permanently
|
12. February 2006 @ 08:33 |
Link to this message
|
yeah there older dvds iam having the problem with also but there ripping fine i will just set the region codes in all three drives i have but i didnt think it mattered since AnyDVD makes the dvd region free anyway ,its all cool
|
|
zebadee
Member
|
12. February 2006 @ 08:52 |
Link to this message
|
|
Hi,
Those who have a similar problem as the one above. Try settings CSS Keys tab & untick Use CSS Archive box, if ticked. This should help in most if not all cases of this nature.
|
Senior Member
|
12. February 2006 @ 12:58 |
Link to this message
|
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD.This message has been edited since posting. Last time this message was edited on 12. February 2006 @ 13:00
|
|
zebadee
Member
|
12. February 2006 @ 13:28 |
Link to this message
|
Hi,
See above for link.
When unpacking remember password (same as 5900).
History appears to be the same as 5900 beta.
AnyDVD History
5.9.0.1, 2006 02 10
- Important: When installing this version over an existing
installation, you must reboot your machine. Otherwise the changes
made in the AnyDVD device driver will not have any effect!
- New: Added workaround for DVDShrink / Nero Recode "Out of memory"
error when copying Macrovision RipGuard protected discs with
menus, e.g. "Madagascar" R1 (US)
- New: Error zones on RipGuard/Arccos/PuppetLock protected titles are
now replaced with "valid material". 3rd party tools like DVDDecrypter
will now work better (no more "Pack Header Error" messages - another try,
this time it should really work).
- Note: To use DVDDecrypter with AnyDVD set I/O Model to SPTI or ElbyCDIO.
Set CSS Cracking method to none. Disable checking for structure
protection.
- New: Added "AnyDVD Ripper". This little tool repairs defective DVDs
while copying them to your harddisk. It can be started from the menu of
the AnyDVD fox icon. It can be started as a stand alone application from
the start menu as well, so it can be used even if AnyDVD is not registered
and the trial period has expired.
It is identical to FixVTS (http://www.videohelp.com/~FixVTS/) but instead
of fixing problems "in place" it copies the files to your harddisk directly
from the source DVD. It fixes the problems while the files are copied.
Some DVDs which have severe mastering defects e.g.,
"Menace II Society" R1 (US) can now be copied with all DVD copy tools
(elby CloneDVD, DVDShrink, etc.) Many thanks to the author of FixVTS!
"AnyDVD Ripper" is a tool intended as a "last resort". It is not
beautiful, and some of its messages cannot be localized yet.
- Fix: Hang after update check with some system configurations
|
|
mackdl
Senior Member
|
12. February 2006 @ 15:06 |
Link to this message
|
|
I noticed that the "FixVTS" home page is by jean1......is this the same jean1 from AD?
If so, one smart lady! My hat is off to you!
If not, my hat off to both of you!
|
|
aabbccdd
Suspended permanently
|
12. February 2006 @ 15:44 |
Link to this message
|
|
she is a software girl BUT inactive as of NOW
|
|
kringles
Member
|
12. February 2006 @ 18:51 |
Link to this message
|
|
Post withdrawn
This message has been edited since posting. Last time this message was edited on 12. February 2006 @ 18:57
|
|
Advertisement
|
|
|
Senior Member
|
12. February 2006 @ 19:17 |
Link to this message
|
I just installed AnyDVD 5.9.0.1 beta and for some reason Menace II Society still doesn't work. DVD Shrink is still giving the Invalid DVD navigation structure error.
My DVD Arsenal: BenQ DW1650 Drive, Plextor DVDRW PX-740A Drive, Nero 6.6.0.13, AnyDVD 6.1.8.4, CloneDVD2 2.9.1.2, DVD Shrink 3.2, DVD Decrypter 3.5.4.0, DVDFab HD Decrypter 3.2.1.0, VobBlanker 2.1.3.0, RipIt4Me 1.7.1.0, FixVTS 1.6.0.3
Proud PS3 owner! PS3 games currently owned: Fight Night Round 3, Heavenly Sword, Madden 07, Marvel Ultimate Alliance, Motorstorm, NHL 07, Resistance: Fall Of Man, Tony Hawk's Project 8
|
