|
Anydvd clone dvd not writing to dvd
|
|
|
rssll
Suspended due to non-functional email address
|
10. August 2006 @ 12:35 |
Link to this message
|
|
I'm using the lateset versions of the 2 mentioned softwares. My problem is that about 50% into the writing it fails due to bad media. I have tried several different types of blank dvd's with no success. I have an hp a747c desktop computer running windows xp, and i'm logged in as the adminastrator. It has a pentium 4 proccessor and is only about 1.5 years old. Does anyone have a clue as to what my problem is? I've tried the software on another computer that was a little older than mine and it works fine. Could someone please help me get started.
|
|
Advertisement
|
|
|
|
|
vwsport80
Member
|
10. August 2006 @ 14:40 |
Link to this message
|
Hello, first off, why are you using those programs to copy a PS-2 game? You can use DVD Decrypter. Just hit mode, ISO read (burns to HDD), then ISO write (burns to blank media). Next how do you know it's because of bad DVD's? What error are you getting. Now, what media are you using? You say you tried different ones but don't say which ones. What are the manufact codes (DVD Decrypter will tell you when you put the disc in the drive).
|
|
rssll
Suspended due to non-functional email address
|
10. August 2006 @ 14:46 |
Link to this message
|
I'm not trying to copy games cds. I'm attempting to copy my dvd movies. As far as error code goes, CloneDVD just says "failure to write due to bad media". I have tried hp, maxwell and memorex dvd blanks, both -r and +r. Sorry about the confusion. I'm new to this type of forum and new to making backups if my movies, any help will be greatly appreciated.
|
|
vwsport80
Member
|
10. August 2006 @ 14:55 |
Link to this message
|
|
Ok, you posted in the PS2 back-up forum, that's why I thought that. Next, make sure that Any DVD is up to date. Also, be sure that your DVD drive's firmware is updated (maybe someone can help me out with a link). Also, you may want to try another brand, you NEED to stay away from Memorex, do a search on the site and you will find what media is good, bad, or ugly. I stay with TY [Taiyo Uiden (spelling?)], or Sony made in Japan. Vebatim is supposed to be very good as well.
|
|
rssll
Suspended due to non-functional email address
|
10. August 2006 @ 16:56 |
Link to this message
|
|
I've tried to update my firmware for my lite on dvd=rw sohw 8225, following HP's instructions. My problem is that when i due this it responds by saying that it cant find the program that wrote the RENU file. I'm using SonicRecord now version 7 dot something. Is it possible to find a website that could update it for me?
|
|
vwsport80
Member
|
11. August 2006 @ 08:05 |
Link to this message
|
Okay, on the HP website, it only shows a SOHW 822s for your model of computer (a747c). So I'll put the link to that site, but check your model numbers, where did you get that model number from? If you have Nero, please post a burn log from something recent. Here's that link to HP http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&cc=us&x=0&d...
Good luck.
|
Moderator
|
11. August 2006 @ 11:51 |
Link to this message
|
|
thread teleported from completely irrelevant forum to correct place
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
vwsport80
Member
|
12. August 2006 @ 14:22 |
Link to this message
|
|
Thanks creaky.
|
|
rssll
Suspended due to non-functional email address
|
14. August 2006 @ 07:08 |
Link to this message
|
|
Ok, I got my dvd writer upgraded from a liteon 822s to liteon 832s. But I still get the same error message "failure due to bad media" I've tried sony disc both +r and -r with no success. One thing to note is that one of the files I downloaded replied " Unable to flash firmware" I'm not sure what that means. Thanks.
|
|
vwsport80
Member
|
14. August 2006 @ 08:48 |
Link to this message
|
|
I'm not sure I understand, did you upgrade your firmware to an 832s, or did you actually change the drive itself? If you had an 822s, all you had to do was follow that link and download the firmeware for the 822s. You say "one of the files" you downloaded didn't work, how many did you download, and which ones? Which ones worked and didn't work. You only needed to get that one file from the link. Also, are the Sony's made in Japan or Taiwan? Is it just one movie you're trying or different ones? What movie(s) are they?
|
|
rssll
Suspended due to non-functional email address
|
14. August 2006 @ 08:59 |
Link to this message
|
|
I found a cross patch code for turning my liteon 822s into a liteon 832s drive. As for the disk Im using, I'm unsure where they are manufactured. Is it possible I did not update the firmware when I used the crosss patch on my 822s drive? I apologize for lack of information, it just that I'm doing entering this forum from my work comp and my home comp is the one i am having the problem with.
|
|
vwsport80
Member
|
14. August 2006 @ 09:23 |
Link to this message
|
No problem, I'm at work myself. So, you flashed your drive to an 832s, I'm not sure but I think it's possible that you may need to update the frimware for an 832s. Before you update the firmware, you MUST make sure that you did, indeed, flash the drive to an 832s. I think if you go to My Computer, right click on the drive, then go to the Hardware tab, you should see it. After you double check, here's the link to update the firmeware on the 832s.
http://us.liteonit.com/us/index.php?option=com_wrapper&Itemid=153
Also, you missed a couple of questions from my last post, please try to answer them if possible. Thanks.
|
|
rssll
Suspended due to non-functional email address
|
30. August 2006 @ 18:35 |
Link to this message
|
Sorry it took so long for me to respond. i did flash my drive to a sohw-832s and i updated to the latest firmware oer the link you gave me. I still can't make copies though. Details for the failure to wrote due to bad media is "writeDVD 10 11 w2" Does this help? Also should I i set the quality setting to DVD-5 or should I use another setting?
|
|
vwsport80
Member
|
31. August 2006 @ 05:30 |
Link to this message
|
If you're using regular, single layer discs then DVD-5 is where it should be. If you ever buy dual layer discs, turn it to DVD-9. I would like you to try something, using the programs in my sig, instead of DVD Clone. You need all four if you don't already have them. I know it seems like a lot, but it's really not that hard. After you download and install (when needed)and make sure there up-to-date, first use DVDFab to rip it to your hard drive (take out your original disc when it's done). Then open VOBlanker, choose the files you just ripped for input, and choose an empty folder for ouput (where you want the new files). Cilck "proc all" on the right side, then click "process." Once that's done, put your blank disc in, open shrink, click "open files" then choose the files VOBlanker just made. There are tons of guides for shrink if you don't know how to use it, just do a search on AD. If you want the whole disc, just click "back up" and I like to choose "make ISO and copy with DVD Decrypter." Select your folder for temp files and set any other options you like, then click "back up" or start or whatever it is. Presto! You should have a working back up. Let me know what happens. Good luck.
|
|
rssll
Suspended due to non-functional email address
|
31. August 2006 @ 17:03 |
Link to this message
|
|
Ok i'm trying your way. one question, when i choose the file for the voblanker do i choose only the video files or do i have to do it twice...onece for video and second time for audio. or is there a way to just select both at the same time.
|
|
rssll
Suspended due to non-functional email address
|
31. August 2006 @ 18:31 |
Link to this message
|
Dvd dycrypter says that no writers were detected. here is s copy of the log from dvd dycrypter:
I 19:26:39 DVD Decrypter Version 3.5.4.0 started!
I 19:26:39 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
W 19:26:39 Drive D:\ (FAT32) does not support single files > 4 GB
I 19:26:39 Initialising SPTI...
I 19:26:39 Searching for SCSI / ATAPI devices...
E 19:26:39 CreateFile Failed! - Device: '\\.\Cdrom0'
E 19:26:39 Reason: The volume for a file has been externally altered so that the opened file is no longer valid.
I 19:26:40 Found 1 DVD-ROM!
I 19:27:38 Searching for SCSI / ATAPI devices...
E 19:27:38 CreateFile Failed! - Device: '\\.\Cdrom0'
E 19:27:38 Reason: The volume for a file has been externally altered so that the opened file is no longer valid.
I 19:27:38 Found 1 DVD-ROM!
W 19:28:30 Device 'Sort By' has been changed!
I 19:28:30 Searching for SCSI / ATAPI devices...
E 19:28:30 CreateFile Failed! - Device: '\\.\Cdrom0'
E 19:28:30 Reason: The volume for a file has been externally altered so that the opened file is no longer valid.
I 19:28:30 Found 1 DVD-ROM!
W 19:29:17 Device 'Sort By' has been changed!
I 19:29:17 Searching for SCSI / ATAPI devices...
E 19:29:17 CreateFile Failed! - Device: '\\.\Cdrom0'
E 19:29:17 Reason: The volume for a file has been externally altered so that the opened file is no longer valid.
I 19:29:17 Found 1 DVD-ROM!
|
|
vwsport80
Member
|
1. September 2006 @ 07:55 |
Link to this message
|
|
You only have to choose the Video TS file (that's all there is anyway). One problem I see is that your hard drive is in FAT32. I had the same problem when mine was, it can't process anything over 4 gigs (which most movies are). There is a way to convert your HDD to NTFS without losing all your info. You can do it in DOS, but I don't remember the command. Maybe someone can help me out here, or do a search on it (AD or google). Let me know.
|
AfterDawn Addict
|
1. September 2006 @ 10:15 |
Link to this message
|
vwsport80
i hate to be a spoiled sport..
about 70% of the movies i did are using fat 32 using CloneDVD and windows 2000
so far there is no movie i can not copy..
and converting to NTFS ye will lose data.i would not do it..
but if ye must here it is..
To convert a volume to NTFS from the command prompt
Open a command prompt window.
In the command prompt window, type
convert drive_letter: /fs:ntfs
Notes
To open a Command Prompt window, click Start, point to Programs, point to Accessories, and then click Command Prompt
|
|
rssll
Suspended due to non-functional email address
|
1. September 2006 @ 12:56 |
Link to this message
|
|
Can I purchase a hard drive thats not fat32 for my computer? Any reccomendations? Maybe external if possible.
|
|
rssll
Suspended due to non-functional email address
|
1. September 2006 @ 16:07 |
Link to this message
|
|
I just checked my hard drive it says it has a capacity of 143 gg and 122 gg available. Wouldn'tthat be nough space to make a temp folder for the files?
|
|
gus738
Suspended due to non-functional email address
|
1. September 2006 @ 17:22 |
Link to this message
|
dvd media is VERY critical , I highly recommend TY = tayio yuden
its simply the best i never get a coaster, heck it even writes it faster then what it says , get the 8x dvd quality will not get better if its slower , i tried everyitng on hard test from 2x to 16 x ,, i dont see a diffrnese so 8x is best
DVDR-blank-dvd-media-highest-price.html" target="_blank">http://www.supermediastore.com/dvd-r-med...hest-price.html
|
|
vwsport80
Member
|
5. September 2006 @ 05:32 |
Link to this message
|
|
I stand corrected, thanks Ireland for calling me on that. Rssll, I'm running out of ideas here. If it's not the media and it's not the software, that leaves me to suspect the drive. Is there any way you can try another drive on your computer? Also, gus738 is right, I love TY's and we need to know if the Sony's you got are made in Japan or Taiwan. If you can't find it, then what spin are they (8x, 16X)? If anyone has any ideas, please say so.
|
|
rssll
Suspended due to non-functional email address
|
5. September 2006 @ 17:43 |
Link to this message
|
The sony disc I have are DVD+R, made in Taiwan. As for the Drives (hard) My computer says it has 2, one in fat32 mode and another in ntsf mode. The one running in ntsf is my recovery drive I believe. Is it possible to create these backup files to my hard drive, and then use my program like Interwin DVD creator or Sonic Record now to put them on a dvd. This Backup thing is getting very frustrating. Is there a step by step manual on the inernet somewhere?
|
|
gus738
Suspended due to non-functional email address
|
5. September 2006 @ 17:55 |
Link to this message
|
|
i dont remember very good, but i belive theirs a commond as well that coverts it but transfers the files alonge with the conversion,i have ntfs ...
oh btw my movie covert one the hades factor was sucsefuly backec up after updating to 6.0.5.1
|
|
Advertisement
|
|
|
|
rssll
Suspended due to non-functional email address
|
5. September 2006 @ 17:59 |
Link to this message
|
I have the latest versions of both CloneDVD and AnyDVD...still cant figure this out. my friend has an older computer and running previous versions of the programs and he has no problems. GO FIGURE! This is driving me crazy.
|
