|
Kryptview Firmware Loading Guide / Tutorial.
|
|
|
stephen_
Member
|
25. July 2009 @ 14:29 |
Link to this message
|
|
kept getting " downloading not required " while tring to flash off pc running vista. tried for pig iron off an old laptop too running xp. worked first time. hardware issue i think on my part , so my advice is to try a different computer if there is one available. happy viewing lol
|
|
Advertisement
|
|
|
|
|
ray1970
Newbie
|
27. July 2009 @ 12:30 |
Link to this message
|
|
Am glad i dont have vista used your guide here guys and was so easy to follow,fair play to you guys for posting it for free keep up the good work
|
|
TedC02
Newbie
|
28. July 2009 @ 10:56 |
Link to this message
|
Been trying to flash this box here this afternoon and i think i may have a standard RD232 cable as opposed to a null modem cable. Is there anyway to check this for certain.
The error message i get from the Kryptview loader is as follows. I've checked the comm port, its connected through a USB Serial adapter and its looking in the right port and the settings appear to be correct.
---------------------------
STB Editor
---------------------------
Can't open serial portCom4
Please check if the com port has the following parameters.
Baudrate : 115200bps
Parity: no parity
Databyte : 8 bit/data
Stop bit : 1
---------------------------
OK
---------------------------
|
AfterDawn Addict
3 product reviews
|
28. July 2009 @ 13:55 |
Link to this message
|
This is the cable you need below
and you can order the cable from the company below
CABLES HERE
its the second cable down you need
|
|
villa943
Newbie
|
12. August 2009 @ 18:43 |
Link to this message
|
|
Hi there,
First of all as this is my first post I just want to thank all the helpful people on this site - especially the experts. I have used this site for a couple of years now and never needed to post anything as all the information was there. Anyways I have flashed a few Kryptview boxes and all were fine but I have having problems with one. It seems to be the same problem that others have had on here. It keeps coming up with the download is not requested. Im using windows xp and I know I have it connected to the correct port ect. I just wondering if anyone had any luck resolving their problems with flashing. Especially those of you who have flashed a couple and it was just one that gave you trouble. Is there a master reset on these boxes? Not the factory restore. I was thinking of masters resetting it and then trying again to see if that would do any good. Any ideas would be great?
|
AfterDawn Addict
3 product reviews
|
12. August 2009 @ 18:50 |
Link to this message
|
|
you need to switch the box off at the back first press start on the loader then switch the box back on again
|
|
villa943
Newbie
|
12. August 2009 @ 18:58 |
Link to this message
|
|
Have tried that and still no joy. Same message keeps coming up. Am beginning to think its a faulty box.
|
AfterDawn Addict
3 product reviews
|
13. August 2009 @ 06:08 |
Link to this message
|
|
did you ever flash a box with that cable before ??
did you check that your comports are set up correctly ??
are you using xp or vista
if vista your wasting your time 90% of people have probs with that OS
|
|
wotsitfor
Junior Member
|
13. August 2009 @ 11:27 |
Link to this message
|
hav a kryptview my remote stopped working yesterday i flashed the box with the new firmware and it worked again got up this moning and its not working again hav reflashed it but it does nothing becuase its the same firmware any suggestions on how to fix this its not the batteries or anything like that please help my heads wrecked changing the channels from the box
|
|
Barry773
Newbie
|
13. August 2009 @ 15:16 |
Link to this message
|
Hi guys, im on NT# in Dublin and have been trying to flash new kryptview since yesterday. I luckily have a direct link to PC without USB converter. Everything wonderfull until hit start button. I then get
Can't open serial portCom4
Please check if the com port has the following parameters.
Baudrate : 115200bps
Parity: no parity
Databyte : 8 bit/data
Stop bit : 1
Ive checked all these and changed some to the values listed but everytime I hit the start button the same message again. Please help as its nearly Saturday....
|
|
Barry773
Newbie
|
13. August 2009 @ 15:21 |
Link to this message
|
|
Sorry should read
Cant open serial port Com1
|
AfterDawn Addict
|
13. August 2009 @ 15:29 |
Link to this message
|
Originally posted by Barry773:
Sorry should read
Cant open serial port Com1
Have you tryed com 2,3 and 4?
|
AfterDawn Addict
3 product reviews
|
13. August 2009 @ 15:51 |
Link to this message
|
Originally posted by Barry773:
Sorry should read
Cant open serial port Com1
Try with the box off hit start on loader then hit the power back on at the back that should start it
|
|
Barry773
Newbie
|
13. August 2009 @ 17:02 |
Link to this message
|
|
Success. Many thanks guys. Worked for me on com4. Keep up the good work and happy viewing.
|
|
Davii
Junior Member
|
16. August 2009 @ 08:13 |
Link to this message
|
|
I just flashed 10 of them i start with the off.SWITCH BACK ON AND HIT START STRAIGHT AWAY ON LOADER.100% SUCCESS
|
AfterDawn Addict
3 product reviews
|
16. August 2009 @ 10:06 |
Link to this message
|
|
I think i covered that above that is the only way to do it ::)
|
|
stevie_g8
Suspended due to non-functional email address
|
14. September 2009 @ 08:51 |
Link to this message
|
sup lads, i've got a "the box super usb" with v1.12 in it, but the thing is that i cant watch sky movies and sky sports channel, even adults channels are gone, i'm in dublin, can anyone sort me out, pls..
|
AfterDawn Addict
3 product reviews
|
14. September 2009 @ 09:12 |
Link to this message
|
|
I think we have covered this in another thread, (post) and you know well you cannot get them, because you are in Ireland due to the new encryption, so i think we have it covered now for you.
|
|
butsy07
Newbie
|
30. September 2009 @ 14:08 |
Link to this message
|
|
Sweet guide. Thanks
|
|
noideame
Member
|
18. June 2011 @ 13:26 |
Link to this message
|
Originally posted by HiTeck:
For the Kryptview you will need the Loader 
which is Here.
Then you will need to download the Bin file which you can get Here. (updated)
Download both the loader and Bin file and save them to your Desktop.
Open the Loader
, once opened you will have a box load like this.
Click on the green download button,
Once you have pressed the download button you will see another box load like below,
Press open and select the Bin file that you saved to your desktop earlier highlighted in yellow,
Press open then the box will load like below with the Bin file selected.
Now turn off your Kryptview, press Start then turn the Kryptview back on. You should now see the firmware starting to load,
Once done you will see this message,
Once finished let the box reboot and then your done, congratulations.
just done mine with this guide worked a treat. nice post and tut hitek
|
|
Lisboa67
Member
|
21. June 2011 @ 16:36 |
Link to this message
|
Hi my pal down the road from me, has same box as me, has just informed me his box has been down for a good week nearly two, so i popped in and done a factory default, re-scanned it for him, pulled plugs out/put back in, checked all the leads etc but still no joy, also tried to do the s/w update but left it for a good 5 mins and nothing happened, tried to go back but it did not respond so had to turn box off then on again, any suggestions anyone, he got the box the same time as me from the same seller, mine is ok (barring the odd freezing of picture) but his is not. Have told him to leave it on Standby overnight then try it tommorrow, but any suggestions anyone
|
AfterDawn Addict
3 product reviews
|
21. June 2011 @ 16:40 |
Link to this message
|
|
Bring the box to your house and see does it work there, and bring your working box to his house and check that, as you know you have a working box.
|
|
Lisboa67
Member
|
21. June 2011 @ 17:22 |
Link to this message
|
Originally posted by e45:
Bring the box to your house and see does it work there, and bring your working box to his house and check that, as you know you have a working box.
Thanks for response back from the last post, what is 'fw' for me to check on his box? If it is the Firm Ware, then i done his box the same time as mine as he brings it to me everytime they go down! Obviously they all were down recently and i updated his the same time as mine, but let me know if this is what you meant by FW?
|
AfterDawn Addict
3 product reviews
|
21. June 2011 @ 17:39 |
Link to this message
|
(yes FW id firmware) told you what to do bring your box to his house and his to yours and try it
|
|
Advertisement
|
|
|
|
Lisboa67
Member
|
22. June 2011 @ 18:51 |
Link to this message
|
|
Thanks to all, all sorted think it was a loose lead, all working ok.Thanks again.
|
