|
Kryptview Firmware Loading Guide / Tutorial.
|
|
AfterDawn Addict
2 product reviews
|
21. June 2009 @ 09:00 |
Link to this message
|
If you have a PC/Laptop with a 9 pin serial socket then all you need is a Null Modem Cable, see pic below.
If you have a PC/Laptop that doesn't have the 9 pin serial socket you will need a Null Modem Cable and a USB adapter, See pic below.
If you have a PC and you are struggling with the usb adapter or you have Vista like me you could install a PCI serial card which is easily added to you PC and with this all you need is the null modem cable which gives you a direct link from your box to the pc.
Null Modem Com/Port setup Tutorial
USB DB9 device coms/ports set up.
Problems with your PC/Laptop not recognising your box.
To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:
1. Go to the Start Menu
2. Right click on "My Computer"
3. Select "Properties"
4. Click on the "Hardware" tab
5. Click on "Device Manager"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
9. You should be able to transfer data once the correct port is selected
If you need drivers go here
http://www.gilsson.com/usb_drivers_download.htm
Follow my advice to step 7. Locate your USB Adapter (port *)
Right click on that port and select properties. Then select port settings, then select advanced. At the bottom of that tab will be a drop down box with the port selected (port * in your case). Use the drop down to select another port (eg 1, 2 or 3). If the port you want to use is already allocated to something else, you can use the same procedure to reassign that port after you have finished.
Save the selections in the usual way. The USB converter will be permanently assigned to the port you selected.
This message has been edited since posting. Last time this message was edited on 23. August 2012 @ 08:41
|
|
Advertisement
|
|
|
|
AfterDawn Addict
2 product reviews
|
21. June 2009 @ 09:01 |
Link to this message
|
For the Kryptview you will need the Loader 
which is Here.
Then you will need to download the Bin file which you can get Here. (updated)
Download both the loader and Bin file and save them to your Desktop.
Open the Loader
, once opened you will have a box load like this.
Click on the green download button,
Once you have pressed the download button you will see another box load like below,
Press open and select the Bin file that you saved to your desktop earlier highlighted in yellow,
Press open then the box will load like below with the Bin file selected.
Now turn off your Kryptview, press Start then turn the Kryptview back on. You should now see the firmware starting to load,
Once done you will see this message,
Once finished let the box reboot and then your done, congratulations.
This message has been edited since posting. Last time this message was edited on 23. August 2012 @ 08:42
|
AfterDawn Addict
2 product reviews
|
21. June 2009 @ 09:17 |
Link to this message
|
|
Reserved for updates.
|
AfterDawn Addict
|
21. June 2009 @ 09:23 |
Link to this message
|
|
Fantastic Hiteck...should be stickied to save it being abused by stupid questions,etc,etc.... great Info,thought,time and effort!!
|
|
risktaker
Suspended permanently
|
21. June 2009 @ 09:39 |
Link to this message
|
|
duplicate info removed
This message has been edited since posting. Last time this message was edited on 21. June 2009 @ 12:09
|
|
risktaker
Suspended permanently
|
21. June 2009 @ 09:41 |
Link to this message
|
|
duplicate info removed
This message has been edited since posting. Last time this message was edited on 21. June 2009 @ 12:09
|
AfterDawn Addict
2 product reviews
|
21. June 2009 @ 09:42 |
Link to this message
|
|
Yawn @risktaker
Cheers Des mate :)
|
AfterDawn Addict
|
21. June 2009 @ 10:01 |
Link to this message
|
|
ok well done everybody,so people should be happy now.
|
AfterDawn Addict
|
21. June 2009 @ 15:18 |
Link to this message
|
Nice guide as usual mate, but I have seen it before 
On a serious note always a pleasure to see your guides and thanks for the time and effort.
|
AfterDawn Addict
|
21. June 2009 @ 15:38 |
Link to this message
|
As usual HiTeck excellent work mate.
|
AfterDawn Addict
|
21. June 2009 @ 15:42 |
Link to this message
|
Evening Karl, long time no see mate. He keeps taking my stuff but it looks good when he spruces it up 
|
AfterDawn Addict
|
21. June 2009 @ 15:53 |
Link to this message
|
Originally posted by sc0user:
Evening Karl, long time no see mate. He keeps taking my stuff but it looks good when he spruces it up
hello sc0ucer me aul china,now don't you start lol 
|
AfterDawn Addict
|
21. June 2009 @ 16:00 |
Link to this message
|
Me I am not like that but am still waiting on my royalties. 
|
AfterDawn Addict
|
21. June 2009 @ 16:19 |
Link to this message
|
Originally posted by sc0user:
Me I am not like that but am still waiting on my royalties.
jaysus if you were, you'd be worth a small fortune by now 
|
Senior Member
|
21. June 2009 @ 16:21 |
Link to this message
|
|
Very true! How's she cuttin' lads!!
|
AfterDawn Addict
|
21. June 2009 @ 16:41 |
Link to this message
|
|
u could have at least put a jingle in it to sound good too,lol
|
Senior Member
|
21. June 2009 @ 17:09 |
Link to this message
|
|
Another nice piece of work HiTeck
This message has been edited since posting. Last time this message was edited on 21. June 2009 @ 17:11
|
AfterDawn Addict
2 product reviews
|
21. June 2009 @ 20:58 |
Link to this message
|
|
Thanks once again all. Royalty cheque is in the post sc0user lol. Enjoy MY tutorial all.
|
|
ryandavid
Newbie
|
22. June 2009 @ 11:04 |
Link to this message
|
|
Great Job, Detail is excellent no problems following your instructions keep up the good work.
Regards
David Ryan
|
|
elroy45
Newbie
|
22. June 2009 @ 12:47 |
Link to this message
|
|
is it me or has the main kryptview discussion thread just disappeared? it was here earlier today.
|
|
risktaker
Suspended permanently
|
22. June 2009 @ 12:57 |
Link to this message
|
Originally posted by elroy45:
is it me or has the main kryptview discussion thread just disappeared? it was here earlier today.
Yep looks like it was removed all right, dont know why but how in ever, its a mad world we live in.
|
|
risktaker
Suspended permanently
|
22. June 2009 @ 13:29 |
Link to this message
|
Originally posted by risktaker:
Originally posted by elroy45:
is it me or has the main kryptview discussion thread just disappeared? it was here earlier today.
Yep looks like it was removed all right, dont know why but how in ever, its a mad world we live in.
Funny it has just returned lol
here ya go http://forums.afterdawn.com/thread_view.cfm/763417
|
|
ray1970
Newbie
|
23. June 2009 @ 07:44 |
Link to this message
|
|
having problem loading box i do everything up to the point where i press start and i get message saying download not requested any ideas what im doing wrong?
|
|
risktaker
Suspended permanently
|
23. June 2009 @ 08:04 |
Link to this message
|
|
wonder where all the experts are now that done the tutorial ?
|
|
Advertisement
|
|
|
AfterDawn Addict
2 product reviews
|
23. June 2009 @ 08:12 |
Link to this message
|
Originally posted by risktaker:
wonder where all the experts are now that done the tutorial ?
LOL, this is the first question in here and only asked 25 mins a go, ferg give it a rest lad, its gettin boaring now.
ray1970
Did you read the guide above about assigning com ports, you need to make sure your com/ports are set up correctly on your PC, read through the guide and assign the port to where the loader is set at. I presume you have a null modem cable and not just a rs232 serial cable.
|
