|
KRYPTVIEW A750
|
|
Junior Member
|
19. June 2009 @ 05:15 |
Link to this message
|
|
Hi all any help appreciated newbie to this lets say never tried to set one up before so anyone idiots guide how to set up kryptview right from the start not loaded with anything just have the box ,
thanks in advance
|
|
Advertisement
|
 |
|
|
|
elroy45
Newbie
|
19. June 2009 @ 06:01 |
Link to this message
|
|
Just spent the last while reading through the thread, great work guys, seems like kryptview is the best bet, mainly because of the better support. Have a SV3 at the moment but with limited channels.
I see plenty of UK sites selling the kryptview, but can anyone recommend a supplier?? also could someone confirm if i need to get any additional cables etc with the box to upload firmwave etc or is it good to go straight from the box (Sorry im not the greatest at this).
Thanks!
|
Senior Member
|
19. June 2009 @ 07:33 |
Link to this message
|
Originally posted by elroy45:
Just spent the last while reading through the thread, great work guys, seems like kryptview is the best bet, mainly because of the better support. Have a SV3 at the moment but with limited channels.
I see plenty of UK sites selling the kryptview, but can anyone recommend a supplier?? also could someone confirm if i need to get any additional cables etc with the box to upload firmwave etc or is it good to go straight from the box (Sorry im not the greatest at this).
Thanks!
google skywonder
Your usual cables will do to flash the box
PLEASE DONT PM ME FOR KEYS!
|
|
elroy45
Newbie
|
19. June 2009 @ 08:02 |
Link to this message
|
Originally posted by cathaldub:
Originally posted by elroy45:
Just spent the last while reading through the thread, great work guys, seems like kryptview is the best bet, mainly because of the better support. Have a SV3 at the moment but with limited channels.
I see plenty of UK sites selling the kryptview, but can anyone recommend a supplier?? also could someone confirm if i need to get any additional cables etc with the box to upload firmwave etc or is it good to go straight from the box (Sorry im not the greatest at this).
Thanks!
google skywonder
Your usual cables will do to flash the box
Thanks for that, not trying to be smart, but usual cables as in??
|
Senior Member
|
19. June 2009 @ 08:09 |
Link to this message
|
Originally posted by elroy45:
Originally posted by cathaldub:
Originally posted by elroy45:
Just spent the last while reading through the thread, great work guys, seems like kryptview is the best bet, mainly because of the better support. Have a SV3 at the moment but with limited channels.
I see plenty of UK sites selling the kryptview, but can anyone recommend a supplier?? also could someone confirm if i need to get any additional cables etc with the box to upload firmwave etc or is it good to go straight from the box (Sorry im not the greatest at this).
Thanks!
google skywonder
Your usual cables will do to flash the box
Thanks for that, not trying to be smart, but usual cables as in??
As in a 9 Pin Female to Female Null Modem Serial cable, available from Maplin Part # L71BT & most PC stores. (It must be a NULL Modem cable & not any other).
-
This message has been edited since posting. Last time this message was edited on 19. June 2009 @ 08:12
|
|
elroy45
Newbie
|
19. June 2009 @ 08:13 |
Link to this message
|
|
Ok cheers guys.
|
|
Dhaga2
Junior Member
|
19. June 2009 @ 10:47 |
Link to this message
|
|
Just go the Kryptview A750 today and I thought it would be flashed already but none of the channels work, do I have to flash it myself?
|
|
risktaker
Suspended permanently
|
19. June 2009 @ 10:57 |
Link to this message
|
Originally posted by Dhaga2:
Just go the Kryptview A750 today and I thought it would be flashed already but none of the channels work, do I have to flash it myself?
yep all come unflashed by law
|
|
Dhaga2
Junior Member
|
19. June 2009 @ 11:12 |
Link to this message
|
|
I hate asking when I should know but flashing this seems to be different to the Replylite, whats this about a Kryptview Loader?
Not that I would want to flash the box but if one wanted to, is there a page that would go through it step by step for me?
Thanks, despite my ignorance!!
|
AfterDawn Addict
|
19. June 2009 @ 11:46 |
Link to this message
|
Originally posted by Dhaga2:
I hate asking when I should know but flashing this seems to be different to the Replylite, whats this about a Kryptview Loader?
Not that I would want to flash the box but if one wanted to, is there a page that would go through it step by step for me?
Thanks, despite my ignorance!!
look in HERE
|
|
Dhaga2
Junior Member
|
19. June 2009 @ 13:25 |
Link to this message
|
Thanks for that, I do what it says in the file but when I connect everything up the clock on my Kryptview doesn't go to 0000.
Then in the STB editor it says
Can't open serial portCom1
Please check if the com port has the following parameters.
Baudrate : 115200bps
Parity:No Parity
Databyte : 8 bit/data
Stop bit : 1
Man, I hate dealing with software!!
Any help will be much appreciated!
|
AfterDawn Addict
|
19. June 2009 @ 13:34 |
Link to this message
|
Originally posted by Dhaga2:
Thanks for that, I do what it says in the file but when I connect everything up the clock on my Kryptview doesn't go to 0000.
Then in the STB editor it says
Can't open serial portCom1
Please check if the com port has the following parameters.
Baudrate : 115200bps
Parity:No Parity
Databyte : 8 bit/data
Stop bit : 1
Man, I hate dealing with software!!
Any help will be much appreciated!
try using a different com port
This message has been edited since posting. Last time this message was edited on 19. June 2009 @ 14:33
|
|
Dhaga2
Junior Member
|
19. June 2009 @ 13:38 |
Link to this message
|
|
Tried but it says 'The downloading is not requested'!! I'm pretty sure its all connected right, the clock still reads the time though. I have the right cables in anyways. I did what it said in the file you directed me too but it doesn't seem to want to work!
|
AfterDawn Addict
|
19. June 2009 @ 14:22 |
Link to this message
|
Originally posted by Dhaga2:
Tried but it says 'The downloading is not requested'!! I'm pretty sure its all connected right, the clock still reads the time though. I have the right cables in anyways. I did what it said in the file you directed me too but it doesn't seem to want to work!
don't use the red button's option just turn it off at the back press download and then turn the box back on again.
|
|
kaisre101
Newbie
|
19. June 2009 @ 14:26 |
Link to this message
|
|
Got mine today as well - remote very slow - anyway, in the download box , in the right hand bottom corner, its here that you can change the comm connection, if comm 1 doesn't work, try comm 2 until you reach the correct one
|
|
Dhaga2
Junior Member
|
19. June 2009 @ 14:55 |
Link to this message
|
Originally posted by karljd:
Originally posted by Dhaga2:
Tried but it says 'The downloading is not requested'!! I'm pretty sure its all connected right, the clock still reads the time though. I have the right cables in anyways. I did what it said in the file you directed me too but it doesn't seem to want to work!
don't use the red button's option just turn it off at the back press download and then turn the box back on again.
I don't know what you mean by red button option but I just tried doing it with the box off and still the same problem. However, when I switched to Com4 it comes up Read REQ Fail in the box under File. I'm doing everything I should do but 0000 just doesn't come up. It's not connected to the tele, only the power and computer and it's switched on. On the display it shows 4 lines in a row.
|
AfterDawn Addict
|
19. June 2009 @ 15:21 |
Link to this message
|
|
The red button option in the loading instructions,are you using vista by any chance?
|
Junior Member
|
19. June 2009 @ 17:07 |
Link to this message
|
|
Hi just got mine loaded today might help some of you re which com to select go to my computer right click for properties click hardware then click device manager should see item called ports click on that and it will show the exact location mind you I have a disc that came with my cable had to load it on first then press start however for me turning box off and back on didnt not work , so here what worked for me start price the red button which is in the middle of remote twice followed by the red standby button that is the button on the top left hand corner of remote. hope this is of help to someone
|
Junior Member
|
19. June 2009 @ 17:21 |
Link to this message
|
|
new loaded box some of the stations seem a bit scramble noticed (alibi and sci fi and a few more) anyone any solutions to resolving this or are they just like that , thanks in advance
|
|
risktaker
Suspended permanently
|
19. June 2009 @ 19:04 |
Link to this message
|
Originally posted by megs25:
new loaded box some of the stations seem a bit scramble noticed (alibi and sci fi and a few more) anyone any solutions to resolving this or are they just like that , thanks in advance
Make sure you are using the 19/3/09 firmware on your box
|
|
Dhaga2
Junior Member
|
20. June 2009 @ 08:23 |
Link to this message
|
Originally posted by karljd:
The red button option in the loading instructions,are you using vista by any chance?
The laptop I'm using to flash the box isn't Vista. Com port 2 is the port that it is in but when I use Com port 2 it just says 'The downloading is not requested'.
|
Senior Member
|
20. June 2009 @ 08:34 |
Link to this message
|
Originally posted by Dhaga2:
Originally posted by karljd:
The red button option in the loading instructions,are you using vista by any chance?
The laptop I'm using to flash the box isn't Vista. Com port 2 is the port that it is in but when I use Com port 2 it just says 'The downloading is not requested'.
Unless it's a very old laptop it wouldn't have a serial port?
Are you using a USB to Serial adapter & have you correctly installed the drivers for it?
-
|
AfterDawn Addict
|
20. June 2009 @ 08:34 |
Link to this message
|
Originally posted by Dhaga2:
Originally posted by karljd:
The red button option in the loading instructions,are you using vista by any chance?
The laptop I'm using to flash the box isn't Vista. Com port 2 is the port that it is in but when I use Com port 2 it just says 'The downloading is not requested'.
Must be the null modem cable then can you get your hands on another one and give that a try.
|
|
Dhaga2
Junior Member
|
20. June 2009 @ 08:40 |
Link to this message
|
|
It is the same two cables I used for flashing the replylite and it worked fine with that. The same laptop too and the drivers are still on it.
|
|
Advertisement
|
|
|
Senior Member
|
20. June 2009 @ 08:46 |
Link to this message
|
Originally posted by Dhaga2:
It is the same two cables I used for flashing the replylite and it worked fine with that. The same laptop too and the drivers are still on it.
Have you checked in the device manager that the port is set correctly on the laptop?
How to Check & Change your COM Port number in XP
Assuming you are using XP?
Do the following.
START
Right Click "MY COMPUTER"
Choose "MANAGE"
In the resulting window, click on "DEVICE MANAGER"
In the right hand pane, click on the little plus sign beside "PORTS" in the right hand pane.
Right click on the USB Adapter (Should be something like "Prolific USB-to-Serial Comm Port (COM#)
Choose "Properties"
Click on "PORT SETTINGS" TAB
Click on "ADVANCED"
Then you will see the COM Port Number Box. You should be able to change it there using the drop down box.
Try to set it to COM2
Restart Windows
Set Loader Software to COM2 & try to connect.
If that fails try another port number.
-
This message has been edited since posting. Last time this message was edited on 20. June 2009 @ 08:47
|
