|
KRYPTVIEW A750
|
|
AfterDawn Addict
|
21. June 2009 @ 18:16 |
Link to this message
|
Originally posted by Clivebb:
Kryptview is now not the only box out there that works here in Ireland, The Box Super USB now also works, I saw one in opperation earlier today, know nothing about the software or where to get one. Just thought it was interesting to see something else work.
problem is it is not 100% working but a number of channels dont work and if u have a clone and put the 1.10 firmware u will brick it.
|
|
Advertisement
|
 |
|
|
|
kaisre101
Newbie
|
22. June 2009 @ 04:14 |
Link to this message
|
|
I have a kryptview and borrowed a SV4, both are working fine except for setanta 2 and celtic tv. Anybody got any ideas why this is?
|
|
elroy45
Newbie
|
22. June 2009 @ 05:09 |
Link to this message
|
Ordered my kryptview the other day so cant wait to get it up and running. Dont have a 9 pin serial socket on my laptop so think i need to get a usb cable. I also have vista on my laptop. Judging by a few posts earlier vista and the usb option seem to cause a few problems in downloading the software??? Can anyone shed any light on this for me?
This message has been edited since posting. Last time this message was edited on 22. June 2009 @ 05:10
|
|
scarmar
Newbie
|
22. June 2009 @ 13:20 |
Link to this message
|
|
can someone tell me where i can get a kryptview a750 in dublin
Mary
|
|
risktaker
Suspended permanently
|
22. June 2009 @ 13:26 |
Link to this message
|
Originally posted by scarmar:
can someone tell me where i can get a kryptview a750 in dublin
you will get them in the Uk only click on link below
KryptView Here
This message has been edited since posting. Last time this message was edited on 22. June 2009 @ 15:36
|
Member
|
22. June 2009 @ 13:26 |
Link to this message
|
|
Is there a channel download for Dublin for this box or do I just go the normal route with a scan?
|
|
risktaker
Suspended permanently
|
22. June 2009 @ 13:49 |
Link to this message
|
Originally posted by mancred:
Is there a channel download for Dublin for this box or do I just go the normal route with a scan?
yep all you have to do is scan the box.
auto scan, then next window you will see your provider, just pick your provider, and touch no other settings and press the green button.
next screen you will get after this, will have your areas if you are on N** choose legacy channels, and then press ok, then just leave it and it will do the rest.
|
Member
|
22. June 2009 @ 15:27 |
Link to this message
|
|
Grand stuff Ferg, pity theres no channel s/w for laz* bastar*s like me lol
Slow at finding Tp's must say - Once she works I couldn't give a toss though lol
|
|
cueboy
Junior Member
|
22. June 2009 @ 15:31 |
Link to this message
|
Originally posted by risktaker:
Originally posted by scarmar:
can someone tell me where i can get a kryptview a750 in dublin
you will get them in the Uk only click on link below
KryptView Here
ffs fergus,u still selling boxes on here? thought u was banned lol
This message has been edited since posting. Last time this message was edited on 22. June 2009 @ 15:37
|
Member
|
22. June 2009 @ 15:34 |
Link to this message
|
|
My God there are some clowns out there cueless.
|
|
risktaker
Suspended permanently
|
22. June 2009 @ 15:35 |
Link to this message
|
Originally posted by mancred:
Grand stuff Ferg, pity theres no channel s/w for laz* bastar*s like me lol
Slow at finding Tp's must say - Once she works I couldn't give a toss though lol
When you have them on, if you put the box in standby at night,it will scan any new ones in automatically, only box that does that ;)
This message has been edited since posting. Last time this message was edited on 22. June 2009 @ 15:37
|
Member
|
22. June 2009 @ 15:41 |
Link to this message
|
After having many fruitful years in this game (wink) I don't actually have cable anymore m8, motorised dish now only. Got the box for the birds parents.
Things are slowing up on sat though too. Good to see a genuine guy helping out "Risktaker" - hope the game stands up for a long time.
I'll be watching - long live emu.
|
|
dilber
Junior Member
|
22. June 2009 @ 21:48 |
Link to this message
|
Hi fergusrb, i got new Kryptview a750 today, you think i need to update the firmware? i tried doing it but getting error message saying (downloading is not requested) please advise how can i solve this issue. thanks
Originally posted by fergusrb:
Originally posted by dilber:
Originally posted by fergusrb:
Originally posted by pulit:
any chance of dub supplier
sorted check your mail
Hi Fergus, if i can ask for dublin supplier, thanks
Hi mate there is none in the republic you will have to get from across the water
have sent you the details and information on the item concerned
|
|
dilber
Junior Member
|
22. June 2009 @ 22:06 |
Link to this message
|
Hi there, i am trying to update the firmware on my new kryptview a750, but keeping getting message saying, downloading is not requested, please help, thanks
Originally posted by gman496:
Originally posted by Clivebb:
Got my new box installed , anyone notice the channel numbers are over the place Rte1 is now channel number 2099, can someone send me a link to a new remote control, can i just say the ones that come with the unit are awfull really bad
Thanks
The ones for the 700's are far superior & work perfectly with the 750
Link:
-
|
|
donalz
Suspended due to non-functional email address
|
23. June 2009 @ 05:58 |
Link to this message
|
|
hi guys wen you hit the download button for the software TURN the box off at the back... there is a button just flick it off and flick it back on again and the software will start to download then
donal
|
Member
|
23. June 2009 @ 08:40 |
Link to this message
|
Ferg, i have ordered some boxes with my credit card for friends
star view usb should I cancel, can you pm please, many thanks in advance. as the channels are going.
|
|
dilber
Junior Member
|
23. June 2009 @ 08:58 |
Link to this message
|
Hi, i treid tht few times but keepng getting the same message, downloading is not requested, is there anything else i need to do, i selected com3, it looks like its working ok, coz i didnt get any mesg. thanks
Originally posted by donalz:
hi guys wen you hit the download button for the software TURN the box off at the back... there is a button just flick it off and flick it back on again and the software will start to download then
|
Junior Member
|
23. June 2009 @ 09:05 |
Link to this message
|
|
Hi dilber com3 didnt work on mine even though I didnt get an error turned out it was com4 as for flicking on / off the button at back did not work for me had to hit the red button(1/2 down remote twice) followed by the standby button(red button top left hand corner) once and that worked fine
|
|
dilber
Junior Member
|
23. June 2009 @ 09:40 |
Link to this message
|
thanks for that, dose the box need to be in standby or on potions when we start the software? also having difficulty finding com port, an help will be appreciated, thanks
Originally posted by megs25:
Hi dilber com3 didnt work on mine even though I didnt get an error turned out it was com4 as for flicking on / off the button at back did not work for me had to hit the red button(1/2 down remote twice) followed by the standby button(red button top left hand corner) once and that worked fine
|
Junior Member
|
23. June 2009 @ 09:46 |
Link to this message
|
|
Hi dilber
here something I wrote earlier this is how I found which com I needed Hi just got mine loaded today might help some of you re which com to select go to my computer right click for properties click hardware then click device manager should see item called ports click on that and it will show the exact location mind you I have a disc that came with my null modem cable had to load it on first then press start however for me turning box off and back on didnt not work , so here what worked for me start price the red button which is in the middle of remote twice followed by the red standby button that is the button on the top left hand corner of remote. hope this is of help to someone
hope this is of some help bear in mind i'm only a newbie so I sure the some more experienced people around that may be able to help however it did the trick for me good luck
|
Senior Member
1 product review
|
23. June 2009 @ 09:50 |
Link to this message
|
|
|
Junior Member
|
23. June 2009 @ 09:50 |
Link to this message
|
|
Megs25
You may be a newbie but that's a great post. That's a topic that causes grief all round and you have been most helpful. Well done.
|
|
dilber
Junior Member
|
23. June 2009 @ 09:52 |
Link to this message
|
i am sorry when i go to device manager, i dont see any ports option, i have null modem cable with rs 232 usb adapter. thanks
Originally posted by megs25:
Hi dilber
here something I wrote earlier this is how I found which com I needed Hi just got mine loaded today might help some of you re which com to select go to my computer right click for properties click hardware then click device manager should see item called ports click on that and it will show the exact location mind you I have a disc that came with my null modem cable had to load it on first then press start however for me turning box off and back on didnt not work , so here what worked for me start price the red button which is in the middle of remote twice followed by the red standby button that is the button on the top left hand corner of remote. hope this is of help to someone
hope this is of some help bear in mind i'm only a newbie so I sure the some more experienced people around that may be able to help however it did the trick for me good luck
|
Junior Member
|
23. June 2009 @ 09:56 |
Link to this message
|
|
dilber as i said mine null modem cable came with a disc and so it didnt appear til I loaded the disc so unfortuately I cant be of any more help bet you it only something minor and someone here will be able to help you out - sorry I couldnt be of more help good luck
|
|
Advertisement
|
|
|
Senior Member
1 product review
|
23. June 2009 @ 09:57 |
Link to this message
|
|
dilber are you trying to flash your box using Vista? if so don't bother as it is more hassle than it's worth, get yourself to a computer running windows xp and you wont have any trouble.
|
