|
|
|
Dvd Shrink burn process error HELP
|
|
|
cschip
Newbie
|
25. March 2007 @ 18:17 |
Link to this message
|
I am getting a burn process error when trying to burn dvds. Sometimes it gets almost all the way thru buring sometimes it is only 1 or 2 % into the burn.
I use verbatim up to 16x 4.7 gb discs.
here is the meeage it gives
1A20-022N-xxxx-1538-xxxx-0478*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 2:18:04 PM
Nero API version: 6.3.0.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVDRAM GSA-4084N>Version: KQ09 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4084N atapi Port 1 ID 0 DMA: On
DiskPeripheral : SAMSUNG HM120JI nvata Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4084 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 958MB (981604kB)
Free physical memory: 327MB (334848kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.3.2007
NeroAPI
10:54:49 PM #1 Phase 112 File APIProgress.cpp, Line 253
DVD-Video files reallocation started
10:54:49 PM #2 Phase 114 File APIProgress.cpp, Line 253
DVD-Video files reallocation completed (no file modified)
10:54:49 PM #3 Phase 111 File APIProgress.cpp, Line 253
DVD-Video files sorted
10:54:50 PM #4 Text 0 File Reader.cpp, Line 118
Reader running
10:54:50 PM #5 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4084N running
10:54:50 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
10:54:50 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
10:54:50 PM #8 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-At-Once, using DVD media
10:56:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2108494 (468:33.19, 4118MB)
10:56:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
10:56:26 PM #11 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: HL-DT-ST DVDRAM GSA-4084N, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
10:56:26 PM #12 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD.)
10:56:26 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2108495 (2108495) = #2108495/468:33.20
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2108495 blocks [HL-DT-ST DVDRAM GSA-4084N]
--------------------------------------------------------------
10:56:26 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST DVDRAM GSA-4084N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4318197760, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2108495 | lead-out | 1 | 0x00 | 0x41
10:56:26 PM #15 Phase 24 File APIProgress.cpp, Line 253
Caching of files started
10:56:26 PM #16 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
10:56:26 PM #17 Phase 25 File APIProgress.cpp, Line 253
Caching of files completed
10:56:26 PM #18 Phase 36 File APIProgress.cpp, Line 253
Burn process started at 8x (11,080 KB/s)
10:56:26 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:56:26 PM #20 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode
10:56:26 PM #21 Text 0 File Mmc.cpp, Line 19451
Set BUFE: supported -> ON
10:56:26 PM #22 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes
10:56:26 PM #23 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
60 00 10 20 30 40 50 00 - 00 00 21 00 00 00 00 00 `...0@P...!.....
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:56:50 PM #24 Text 0 File Cdrdrv.cpp, Line 1277
22:56:50.609 - HL-DT-ST DVDRAM GSA-4084N\H1 T0 : Queue again later
10:57:21 PM #25 SCSI -1114 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00B90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x00 0x29 0x00
10:57:21 PM #26 CDR -1114 File Writer.cpp, Line 301
Reset occurred
10:57:21 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:57:21 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
10:57:21 PM #29 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was -1
10:57:50 PM #30 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 AM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
25. March 2007 @ 18:49 |
Link to this message
|
cschip
The main problem according to your log is that your burner and choice of DVD disks are'nt getting along.
Here:
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD.)
and
Media Specific:
60 00 10 20 30 40 50 00 - 00 00 21 00 00 00 00 00 `...0@P...!.....
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
These two areas suggest that the burner is unable to correctly recognize those Verbatim disks, so it's having trouble writing to them. Your burners firmware is upto date, so that's no help, try burning at 4X to see if that helps. You might want to consider another brand of DVD disks, like Sony.
Also, make sure you enable DMA mode for all drives, this one is set most likely to PIO mode:
DiskPeripheral : SAMSUNG HM120JI nvata Port 2 ID 0 DMA: Off
Here's a guide for enabling DMA mode:
http://www.onthegosoft.com/dma_setting_nt.htm
or
http://www.burstcopy.com/dma/xp/
Lastly, here:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM
This suggests that you have or may of had ROXIO 8 installed, normally if you have Nero installed, having ROXIO also install isn't always a good thing. You don't appear to have INCD installed, so having both apps might no be a problem, if you decide to remove roxio, the proper way is to use the zap tool found here:
http://www.softpedia.com/progDownload/Ro...load-21600.html
Start with these suggestions and see if you can get a successful burn.
NOTE: Your version of Nero is a bit old, consider updating, it's free.
http://www.nero.com/nero6/enu/nero-up.php
|
|
PacMan777
AfterDawn Addict
|
26. March 2007 @ 00:27 |
Link to this message
|
Quote:
DiskPeripheral : SAMSUNG HM120JI nvata Port 2 ID 0 DMA: Off
Here's a guide for enabling DMA mode:
http://www.onthegosoft.com/dma_setting_nt.htm
or
http://www.burstcopy.com/dma/xp/
SATA drives don't work on DMA-PIO. So it doesn't matter if a SATA drive reads DMA off.
I agree with John, media and/or driver conflicts may be a problem. The easiest thing to do is try different media, a good Sony +R is what I've had good luck with. Wally World (Wal Mart) and other stores carry them all the time. If no go then, I'd try a burn using ImgBurn just to see if it's a problem specific to Nero or one that effects the system when trying to burn with any program. If still a problem I'd eliminate the possibility of conflict with the Roxio driver, delete Roxio and use Roxizap.
When updating check with Gwen and the gang in the Nero forum for the last stable release and links. Nero 6 was bad for certain versions being loaded with bugs. If you were planning on it, now would be a good time to upgrade to Nero 7.
This message has been edited since posting. Last time this message was edited on 26. March 2007 @ 00:58
|
|
