|
AnyDVD and CloneDVD Problem
|
|
|
TJL75
Newbie
|
7. June 2008 @ 22:22 |
Link to this message
|
|
I'm using the 2 programs to backup some of my DVDs and got this message on CloneDVD:
E:/Video_TS/VTS_06_1.VOB:read error
The system cannot read from the specified device. If reading the media has failed, please clean the surface and try again.
Any idea what's going on? This only happened with my Star Wars III and Indiana Jones DVDs. Thanks for the help!
Terry
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
8. June 2008 @ 00:20 |
Link to this message
|
make sure both are the most current versions
make sure you have to most up to date firmware for you're optical drive.
most likely to problem is the DVDs are scratched/dirty or bad causing the transcoding read errors. you can try to clean them or use other programs to transcode with
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
TJL75
Newbie
|
8. June 2008 @ 10:07 |
Link to this message
|
Versions and firmware are both up to date...Indy is brand new, Star Wars had a few small scratches through.
|
AfterDawn Addict
|
8. June 2008 @ 13:12 |
Link to this message
|
Intervideo DVD Copy 6 transcodes about anything try the free trial
http://apps.corel.com/lp/ivi/index.html
you will need to run anydvd behind it like you do with clonedvd
also you could try using the anydvd ripper ripping the movie to your HDD first then use clonedvd to transcode
could be your optical drive too, some brands have problems transcoding certain movies. what brand is it? can you try a different drive to transcode?
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
This message has been edited since posting. Last time this message was edited on 8. June 2008 @ 13:12
|
AfterDawn Addict
|
8. June 2008 @ 16:39 |
Link to this message
|
|
Are they new SATA Lite-ons?
|
AfterDawn Addict
3 product reviews
|
9. June 2008 @ 19:24 |
Link to this message
|
|
@Garmoon...have you seen a problem with those ^^? Just curious.
|
AfterDawn Addict
|
9. June 2008 @ 20:29 |
Link to this message
|
I've had NOTHING but problems with SATA DVD-RW in a NEW XPS Dell 630i. I have a phillipsLite-on 16X and a Lite-On 20X and as of tonite a Sony/NEC optiarc SATA also that work with less than 40% of my dvd burning programs. Clone DVD doesn't work even tho it says the disc is written. They are trying to help. The USB external drive I've got is working on ALL programs I use. Dell has been no help. I talked with atechie for 2 1/2 hr at Dell-he had control of my pc-he blamethe programs-It's bull $hit. It's the set of the SATA drive AND SATA motherboard that casuing end of disc not being performed. Wait as these new XPS are bought more problems will be encountered.JM2C! You know of anyone else having this problem? PM me
Edit: Slysoft is being VERY helpful and I think they and I know it's the pc set up and not their products. AnyDVD and CLOneDVD work like clockwork on USB drive. And thats where this optiarc drive is going -USB enclosure.
This message has been edited since posting. Last time this message was edited on 9. June 2008 @ 20:32
|
AfterDawn Addict
|
10. June 2008 @ 01:35 |
Link to this message
|
|
garmoon there is sooo many problems using box systems and burning software.
consider a custom built next time
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
|
10. June 2008 @ 19:51 |
Link to this message
|
@Zoso
I did consider a custom build but $300 difference was not in custom build's favor. The pc excellent except it doesn't close DVD with certain programs. SATA and program conflict somewhere and no one can figure it out.
|
AfterDawn Addict
|
11. June 2008 @ 01:27 |
Link to this message
|
|
garmoon, yes i understand
my opinion is the preloaded software that comes with box systems cause the problems.
it would be interesting to reformat the HDD wiping it clean and install you're own windows XP/Vista and see if you have the same problems
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
|
11. June 2008 @ 07:54 |
Link to this message
|
I'm going to ask Dell to send Tech to my house.
|
AfterDawn Addict
3 product reviews
|
11. June 2008 @ 10:40 |
Link to this message
|
|
You'll have to let us know how that turns out Garmoon. :)
|
AfterDawn Addict
|
11. June 2008 @ 15:11 |
Link to this message
|
Be glad too. I spent 2.5 hr on phone with their tech. he tried his best. He took control of my pc and basically I showed him how none of the SATA DVD RW drives were working properly with some burning software, he being able to see my monitor in the Philippines. Dell has been accommodating thus far. Whether I get that tech out here will be interesting. As I see it this pc XPS 630i is not functioning properly. Changing drives hasn't help. I've amassed 2 more Liteys one an optiarc to go along with original phillips Litey (POS no support). They all work the same-so I know the drives are functioning. They all burn a disc BUT some programs get errored out when trying to close the disc. DVFabPlat with it set to burn with Nero is working, not with Fab burn program. I just upgraded and they ask if you want to install their VSO engine??
No one has had any answers and I've seen no related problems with this pc on forums. The best DRM available -hell if I coiuld figure out how to sell it to MGM I'd retire tomorrow. LMAO
|
AfterDawn Addict
4 product reviews
|
11. June 2008 @ 18:56 |
Link to this message
|
Garmoon
this may sound dumb, but do you have vista on that dell????i know there is alot of problems with vista and some of our burning programs..
i have that LH-20A1S litey and it has burnt with every program out there and at every speed possible.
sorry to get off topic here.
TJL75
as Zoso(happy b-day) said you might wanna clean the disc. ive had some new disc right out of the store never been touched wouldnt rip until i cleaned them once. try getting you some of the gel hand cleaner smear it all over the disc then rinse it off and try to rip it.. works 99% of the time for me.
|
AfterDawn Addict
3 product reviews
|
11. June 2008 @ 19:14 |
Link to this message
|
|
Just to add a little to Cincyrob's advice...when you wipe the disc clean wipe away from the center to the edge.
Or maybe i'm just anal retentive. :)
|
AfterDawn Addict
|
11. June 2008 @ 19:30 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 11. June 2008 @ 19:33
|
AfterDawn Addict
|
12. June 2008 @ 01:05 |
Link to this message
|
Originally posted by ZoSoIV:
my opinion is the preloaded software that comes with box systems cause the problems.
looks like i was right. if your buying a box system get it with a clean HDD and load windows yourself with NO preloaded software built into it
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
|
12. June 2008 @ 06:05 |
Link to this message
|
Yeah zoso but you didn't tell me what software was causing the problem. You get half credit. And how do you explain there was no conflict with USB external burner? HUH? LMAO
|
Moderator
|
12. June 2008 @ 15:25 |
Link to this message
|
I'm a long-term user of 'Corporate' type pc's ie Compaq, Dell etc. They can be great machines, i always make sure to wipe the corporate bloatware off and reload my own OS, whether it's Windows or Linux, never had trouble with them once they've been wiped.
I have a couple SATA burners and they work great as long as not bith used at the same time, but that's only due to me buying a cheap and not very good PCIe SATA card, couldn't find a decent one at the time (i get around the problem for now by not burning with those 2 drives at the same time).
..all my (internal) hard drives on that machine are nice SATA-II drives and the performance is only affected when anything connected to that cheapy PCIe card is being accessed. I just need to get around to buying a decent controller card sometime.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
|
12. June 2008 @ 18:07 |
Link to this message
|
Thanks for info Creaky, but right now I'm not real competent with wiping HDD and installing an operating system over. I know it's not that hard but now I would void a warranty with Dell. I now have another XP machine to play around with and install it's op system over. Besides the urgency to get another XP machine and NOT Vista, prevented me from building one myself. That is my goal one day. I think I could install all the hardware with no trouble with proper instructions. It looks like complicated Erector Set inside and I excelled at that toy.
I have since found out from yesterday that AnyDVD is also part of the problem on this Dell machine. It jumps in before the SATA drives finish closing the discs in Recode,Express,ImgBurn, and I believe DVDNextcopy2. I get burn errors-sometimes it works sometimes it is an error. Everything works with AnyDVD disabled during any program burn. The reason DVDFabPlat worked from gitgo was it requires AnyDVD be disabled. I have also notified slysoft who have been very helpful too.
|
AfterDawn Addict
|
13. June 2008 @ 01:16 |
Link to this message
|
garmoon use the anydvd ripper ripping the movie file to you're HDD. then disable anydvd and transcode and burn with clonedvd or nero recode 2, that should work fine
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
|
13. June 2008 @ 07:54 |
Link to this message
|
ZOSO
That fine advice and it works but the last two burns that Fab Plat gave me-albeit 100%comp- looked awfully impressive on upconvert player on HD set!And AnyDVD is not involve in that process. I have all kinds of work arounds available so it's not like I can't do a burn but it's now more of a headache.
|
Senior Member
|
10. August 2008 @ 17:02 |
Link to this message
|
garmoon- I just git a new dell too & I'm having similar Problems except if I output to The Dvd Writer /burner instead of the hard drive it works ! If I try to do it the Normal ? (for me ) way that is to the hard drive 1st . It ain't happening ! I get from what I can see it's not getting to the hard drive ? I Have power Dvd on My Computer Came with it ! also Windows Media Player I read the link about The conflict between Anydvd/Clone Dvd& Power Dvd So I'm Thinking about Deleting It {PowerDVD} Because I have -Roxio Easy Media Creator 10 & it Has Cineplayer which I could use in it's place ? I don't have Problems Burniing disc with Other Programs & The computer generally works well other Than That !!! I am Thinking of adding a couple of Lite-On's to it myself but would like to get the conflict / Problem solved 1st. before I do ? What have you finally decided to Do Yourself?
FeetZ Up ! Head Down !
|
AfterDawn Addict
|
10. August 2008 @ 17:52 |
Link to this message
|
@BIGTOXY69.
Which Dell did you get? Mine is the XPS 630i with XP Pro installed. All ODD and HDD are SATA interface. Power DVD is not the problem. The problem is AnyDVD and conflicts with PowerDVD DX installed from Dell. Are you using AnyDVD or DVD Fab to get past the DRMS?. What program are you using to encode before you burn disc-CloneDVD? You program won't write to the HDD first so you can burn it whenever? But will output for a successful burn? One way around that would be to let the program output to the burner and not erase the temp file from HDD. My problem is on the other end. At the end of the burn, when the SATA internals try to finalize(close) the disc the burn fails in any program when AnyDVD is running. If I Rip to HDD with AnyDVD and close AnyDVD then I have no problems. But that cause me to have more steps in the process. DVD Fab works fine because AnyDVD has to be disabled. Also my external USB LG drive has no problems closing the disc even with Clone DVD and has not been a problem. Since this build came with only one ODD. And not that great a drive-Phillips-Lite_On-could not find any good firmware upgrades on much about it especially bit setting. So I bought a Lite_On LH-20A1S-great drive writing and reading. But same conflict also. So I decided to $hit can the crappy Phillips and replaced it with an Optiarc-Lite_On mistake, a 7191S, and have finally gotten the correct NEC-Optiarc AD-7200S which according to greensman is the new best thing.
I tried for 2+ hrs with Dell to solve my problem with their tech in control of my pc and he couldn't help we even burned a DVD or 2. Slysoft had a few post with me but had no answers. When I finally figure out the culprit was AnyDVD I figured out the work arounds. I can also let it run like I used to and then use ImgBurn to close the unfinalized discs. I love the pc now it's fast and have had no other problems. I would not remove PowerDVD DX? version permanently. It's a good viewer. I even rolled back my pc to the day it arrived-I'm on 4th incarnation with their Norton ghosting setup that came installed. The first time I installed just AnyDVD and Clone and they did not work in closing the disc. Also Jan and Creaky are not advising to upgrade any further than Xp sp2. which I haven't. Did you get XP or Vista-hope not? I can't imagine why it won't rip to the HDD first, since it's still going to do that if you're not burning on the fly. Reply with the info. Maybe we can figure something out. It took me 3 weeks! LMAO gary
Edit: I also have Roxio DE 10.1 installed with nero 8 and they both work and with no conflicts.
This message has been edited since posting. Last time this message was edited on 10. August 2008 @ 17:54
|
|
Advertisement
|
|
|
Senior Member
|
10. August 2008 @ 19:00 |
Link to this message
|
garmoon- I Bought The inspiron 530 - with Vista home basic Yeah I know ( Fista ) But I just got the Home basic version and it's not all that bad other than the Problem I told you about ? kinda like a Harder less intuitive Xp ? Anyway ! I normally stick with AnyDVD/Clone like I did with my old Emachines W2040 Or atleast I'm Trying too anyway ? I can't see it as a Sata Problem cause It Does burn Disc /dvd media just not they way I mentioned before ! What I did find wierd is that I did'nt know @ the time that my Dell came with Roxio Easy Media Creator 9 installed And I went and Installed 10 too ! I've had Roxio software in Versions 3.0 ,5, 6 and now 9 & 10 and all the previous versions would make you delete the older version before installing the new one ! Not This time Though ! I've mainly been using the Roxio For Copying my Wifes Recipe show Disc so the originals stay safe ! I use Anydvd/Clonedvd output to the Dvd writer & then use Roxio To copy from that disc if I need more than one copy For the family ect... I could just go back and run it through anydvd/clone but My way is quicker !!! for me anyhow ! well I'm not Giving up but past my nap time now Nightshift & all so I'll Bother You again real soon Buddy {SAD BUT TRUE!!!} Thanx & By Now !!!
FeetZ Up ! Head Down !
|
