Originally posted by killiano:

---

Hope someone can help!

I managed to unplug my eurovox when running the Kuro Unified Flash Loader - don't ask how!!

Now the box wont seem to power on again - only for one second.

Any ideas? I'm fairly stuck.

Cheers

---

Originally posted by sjcon23:

---

hi Can you please give the thread to plugging in and updating via PC the standard Eurovox digital box
thanks

---

Originally posted by HiTeck:

---

Originally posted by killiano:

---

Hope someone can help!

I managed to unplug my eurovox when running the Kuro Unified Flash Loader - don't ask how!!

Now the box wont seem to power on again - only for one second.

Any ideas? I'm fairly stuck.

Cheers

---

How do you mean wont power on, What lights are lit if any, If it is stuck on standby just try re-running the firmware again,

---

Originally posted by killiano:

---

Originally posted by HiTeck:

---

Originally posted by killiano:

---

Hope someone can help!

I managed to unplug my eurovox when running the Kuro Unified Flash Loader - don't ask how!!

Now the box wont seem to power on again - only for one second.

Any ideas? I'm fairly stuck.

Cheers

---

How do you mean wont power on, What lights are lit if any, If it is stuck on standby just try re-running the firmware again,

---

If I plug it out and in again - a broken-line light trails a square around the LED screen and then goes blank. After that there is no sign of any power.

I've tried running the firmware again but it doesn't seem to be recognising the connection. Tried it manually through COM1 but still nothing.

I even went as far as opening it up and seeing if anything was obviously wrong on the motherboard but didn't spot anything - though all I was looking for was something clearly knocked out of place as oppoesed to something more technical.

Never had any power problems before this so I'm a little confused, to say the least, as to why it's happened

---

Originally posted by karljd:

---

Originally posted by killiano:

---

Originally posted by HiTeck:

---

Originally posted by killiano:

---

Hope someone can help!

I managed to unplug my eurovox when running the Kuro Unified Flash Loader - don't ask how!!

Now the box wont seem to power on again - only for one second.

Any ideas? I'm fairly stuck.

Cheers

---

How do you mean wont power on, What lights are lit if any, If it is stuck on standby just try re-running the firmware again,

---

If I plug it out and in again - a broken-line light trails a square around the LED screen and then goes blank. After that there is no sign of any power.

I've tried running the firmware again but it doesn't seem to be recognising the connection. Tried it manually through COM1 but still nothing.

I even went as far as opening it up and seeing if anything was obviously wrong on the motherboard but didn't spot anything - though all I was looking for was something clearly knocked out of place as oppoesed to something more technical.

Never had any power problems before this so I'm a little confused, to say the least, as to why it's happened

---

was it the black box maxv 2008 you where flashing?

---

Originally posted by sc0user:

---

Try a hard boot reset. Unplug the EV, hit download on the UFL, wait a few seconds and then plug it back in again. It may take a few attempts.

If the bootloader is corrupt you may need to jtag it. But try as I said above first.

---

Originally posted by killiano:

---

Originally posted by sc0user:

---

Try a hard boot reset. Unplug the EV, hit download on the UFL, wait a few seconds and then plug it back in again. It may take a few attempts.

If the bootloader is corrupt you may need to jtag it. But try as I said above first.

---

Thanks sc0user, I'll give it a try.

Excuse the ignorance but how do you jtag the bootloader? I'll try the other first though.

Cheers.

---

Originally posted by sc0user:

---

Originally posted by killiano:

---

Originally posted by sc0user:

---

Try a hard boot reset. Unplug the EV, hit download on the UFL, wait a few seconds and then plug it back in again. It may take a few attempts.

If the bootloader is corrupt you may need to jtag it. But try as I said above first.

---

Thanks sc0user, I'll give it a try.

Excuse the ignorance but how do you jtag the bootloader? I'll try the other first though.

Cheers.

---

You need a jtag kit about £15 and it come with instructions and all you need. I will give you a link to it, but try as I said above first no sense in wasting money just yet.

---

Originally posted by bluesy:

---

Sorry in advance if this has been dealt with - I have been looking through the threads on updating the EV Max V - I have not not updated before and am a complete novice and a bit nervous.
I don't have a laptop but have a pc so will need to bring the bx to the pc to run the update - but does the N*L cable need to be connected as well ?
Again, sorry if this is a stupid question

---

Originally posted by qazsam:

---

Originally posted by bluesy:

---

Sorry in advance if this has been dealt with - I have been looking through the threads on updating the EV Max V - I have not not updated before and am a complete novice and a bit nervous.
I don't have a laptop but have a pc so will need to bring the bx to the pc to run the update - but does the N*L cable need to be connected as well ?
Again, sorry if this is a stupid question

---

i dont think it matters

---

Originally posted by karljd:

---

Originally posted by qazsam:

---

Originally posted by bluesy:

---

Sorry in advance if this has been dealt with - I have been looking through the threads on updating the EV Max V - I have not not updated before and am a complete novice and a bit nervous.
I don't have a laptop but have a pc so will need to bring the bx to the pc to run the update - but does the N*L cable need to be connected as well ?
Again, sorry if this is a stupid question

---

i dont think it matters

---

no just hook it up to the pc in standby

---

Originally posted by SG8:

---

Originally posted by kwackgt:

---

Argh!- give up Ive punched in the latest codes. I know that i can not access a port my computer doesnt see as a drive,file etc.

I can set up a nun modem on com1, but afer that no diffrence neither the update or any other versions will allow me to download my channel listing off the box, or upload the latst firmware.

I dont want to irritate people with what is probably piss-easy to expierenced eurovox owners so i will carry on punching in codes manually until is doesnt work and the sling it in the loft lol!

---

Hey dude,
can anyone help me...i have a maplins null moodeem cable order number L71BT and have tried downloading loadsa of times....i get the files on my p.c. but cant get past that point....the furthest i have got is waiting on response of your receiver and nothing happens or,
does it just seem like nothing happens.....any help would be super cos i'm getting fierce fed up.
Thanks in advance



What happens when you try to download the update? Do you get any error message at all?

The NULL MODEM cable could be the problem, especially if it is not really a NULL MODEM CABLE!!

Update: I just googled that part number you quoted and it would appear to be a regular serial cable and NOT a null modem, so now you know what your problem is.
http://www.maplin.co.uk/Search.aspx?criteria=L68BT&DOY=5m4 is what you have.

This is what you need: http://www.maplin.co.uk/Module.aspx?Modu...oy=17m4

---

Originally posted by murphj11
Hey dude,
can anyone help me...i have a maplins null moodeem cable order number L71BT and have tried downloading loadsa of times....i get the files on my p.c. but cant get past that point....the furthest i have got is waiting on response of your receiver and nothing happens or,
does it just seem like nothing happens.....any help would be super cos i'm getting fierce fed up.
Thanks in advance



What happens when you try to download the update? Do you get any error message at all?

The NULL MODEM cable could be the problem, especially if it is not really a NULL MODEM CABLE!!

Update: I just googled that part number you quoted and it would appear to be a regular serial cable and NOT a null modem, so now you know what your problem is.
http://www.maplin.co.uk/Search.aspx?criteria=L68BT&DOY=5m4 is what you have.

This is what you need: http://www.maplin.co.uk/Module.aspx?Modu.../quote]

---

Originally posted by murphj11:

---

Originally posted by SG8:

---

Originally posted by kwackgt:

---

Argh!- give up Ive punched in the latest codes. I know that i can not access a port my computer doesnt see as a drive,file etc.

I can set up a nun modem on com1, but afer that no diffrence neither the update or any other versions will allow me to download my channel listing off the box, or upload the latst firmware.

I dont want to irritate people with what is probably piss-easy to expierenced eurovox owners so i will carry on punching in codes manually until is doesnt work and the sling it in the loft lol!

---

hi dudes.....i'm pretty confident that i have a null modem cable so i will fire ahead trying to sort out the flash for my europox.....my dad thinks i'm a whizz and is bringing his "the box"
for me to update and i cant sort my own....just as well its saturday and i have nowt else to do....any help again would be greatly appreciated
Hey dude,
can anyone help me...i have a maplins null moodeem cable order number L71BT and have tried downloading loadsa of times....i get the files on my p.c. but cant get past that point....the furthest i have got is waiting on response of your receiver and nothing happens or,
does it just seem like nothing happens.....any help would be super cos i'm getting fierce fed up.
Thanks in advance



What happens when you try to download the update? Do you get any error message at all?

The NULL MODEM cable could be the problem, especially if it is not really a NULL MODEM CABLE!!

Update: I just googled that part number you quoted and it would appear to be a regular serial cable and NOT a null modem, so now you know what your problem is.
http://www.maplin.co.uk/Search.aspx?criteria=L68BT&DOY=5m4 is what you have.

This is what you need: http://www.maplin.co.uk/Module.aspx?Modu.../quote]

---

Originally posted by keith72:

---

Hi Lads.

I flashed several boxes over weekend all goin well. However, I just flashed folks box and done factory reset. All 13 TP's found & 138 channels on symbol rate 6887 (They on NTHell). But when I switched to SSP1 it still says "Plese wait, code updating...". Its been 30 mins now and still no change. Other boxes I flashed rolled after 30 secs. I checked and EMU is enabled. Any ideas? Box is genuine etc. As i said no probs in loading new software. Help!!

---