|
Post your DISC quality scans here 2
|
|
AfterDawn Addict
7 product reviews
|
27. December 2008 @ 14:41 |
Link to this message
|
well that tears it! All of the drives via ide are SLOW ripping. Im gonna be angry if these new cords are 40 instead of 80 wire. Do they still sell 40?? that'd be pretty dumb! Suppose it'd be my fault though. Gonna check the bios in a minute and see if I can determine whats up there.
Bad spelling :)
To delete, or not to delete. THAT is the question! This message has been edited since posting. Last time this message was edited on 27. December 2008 @ 14:42
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
27. December 2008 @ 15:07 |
Link to this message
|
|
make sure you're in DMA mode and not in PIO mode that will cause slow ripping
http://forums.afterdawn.com/thread_view.cfm/260038
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
7 product reviews
|
27. December 2008 @ 15:36 |
Link to this message
|
Its not allowing me to enter advanced settings in device manager(for the add on card anyway). I believe this (standard Dual channel) to be the add on card anyway)
Where as the onboard controller...
Wonderful, miserably failed a burn. I stopped it when it wouldnt exceed 0.8X! Couldnt find settings in the bios either. Should be loads of fun!
Sorry about Off topic guys. I'll get this worked out. :D
To delete, or not to delete. THAT is the question! This message has been edited since posting. Last time this message was edited on 27. December 2008 @ 15:47
|
AfterDawn Addict
4 product reviews
|
27. December 2008 @ 18:57 |
Link to this message
|
check your cables Omegaman. i had the same problem.. swapped out the cables and everything was golden again..
got a nice burn here. burnt on the 7200A scanned on my litey.
|
AfterDawn Addict
7 product reviews
|
27. December 2008 @ 19:17 |
Link to this message
|
Ordinarily, I would try that first, but... I got 2 identical ide round cables(bought separate)with my add on card. The other is ran to my LG and iHAP422 Via MOBO ide controller. They perform 100% so far. Surely my luck isnt THAT bad! I dont take coincidences lightly. REALLY leaning toward card setup, or card malfunction. But since im unable to effect DMA mode, I really believe that has something to do with it. Perhaps my bios needs an upgrade???
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
|
28. December 2008 @ 01:38 |
Link to this message
|
Originally posted by omegaman7:
Ordinarily, I would try that first, but... I got 2 identical ide round cables(bought separate)with my add on card. The other is ran to my LG and iHAP422 Via MOBO ide controller. They perform 100% so far. Surely my luck isnt THAT bad! I dont take coincidences lightly. REALLY leaning toward card setup, or card malfunction. But since im unable to effect DMA mode, I really believe that has something to do with it. Perhaps my bios needs an upgrade???
O-man7 I'm not the best when it comes to IDE cards as I only have one and it works fine. ;) Anyway... you might un-install the card in question, remove the card and then restart your machine and make sure it's NOT seen any longer, then re-install the card, NO device hooked up and then install software and restart again.. THEN hook your devices up after shutting down again... I know it seems like a lot of work but it might do the trick. Of course it could be the cable, but NOT likely. I would lean toward faulty software or a BIOS incompatibility. ;)
I hope some of that makes sense. :p
....gm
|
AfterDawn Addict
7 product reviews
|
28. December 2008 @ 02:27 |
Link to this message
|
Dude, which card, and are dvd drives ran to it?
LOL, sorry to be so forward. Im having a REALLY bad time with this SOB! If I could just enter its own bios, then I might get somewhere. I'll tell you something right now. I will NOT buy another startech device!!!
To delete, or not to delete. THAT is the question! This message has been edited since posting. Last time this message was edited on 28. December 2008 @ 02:29
|
AfterDawn Addict
|
28. December 2008 @ 12:06 |
Link to this message
|
Originally posted by omegaman7:
Dude, which card, and are dvd drives ran to it?
LOL, sorry to be so forward. Im having a REALLY bad time with this SOB! If I could just enter its own bios, then I might get somewhere. I'll tell you something right now. I will NOT buy another startech device!!!
The card that is giving you fits. If both are then do that for each card. You need to go to the MSI website and see about a BIOS flash... BUT BE VERY CAREFUL flashing your BIOS!!! I can't be more serious here, you can FUBAR your mobo in about 30 seconds if you do something wrong. If you've done it before then you know the risk you take. ;) Whatever path you take, GOOD luck. ;)
...gm
|
Moderator
|
28. December 2008 @ 12:13 |
Link to this message
|
I'd concentrate on the PCI card personally. I have a nice MSI mobo (P35 Platinum) but i toasted it when i first bought it last year, and i was perfectly au fait with flashing it, and it still broke. Luckily i RMA'd it and needless to say i won't be flashing this one at all. (I've flashing many motherboard and even graphics card bioses in the past but wasn't best pleased when this one broke when it was minutes old after being built
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
7 product reviews
|
28. December 2008 @ 12:58 |
Link to this message
|
Originally posted by greensman:
BUT BE VERY CAREFUL ...gm
LOL. Flashing is the one thing that makes me nervous and intimidated. Now if I had another one of these boards and a FDD, then I might attempt it. You guys ever use the LIVE update? I must admit though, really leaning at the card on this one. Supposedly the card has its own bios, and I havnt the foggiest idea how to enter it! :(
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
|
28. December 2008 @ 13:58 |
Link to this message
|
Originally posted by omegaman7:
Originally posted by greensman:
BUT BE VERY CAREFUL ...gm
LOL. Flashing is the one thing that makes me nervous and intimidated. Now if I had another one of these boards and a FDD, then I might attempt it. You guys ever use the LIVE update? I must admit though, really leaning at the card on this one. Supposedly the card has its own bios, and I havnt the foggiest idea how to enter it! :(
First off.. sorry for the OT creaky and others.... if someone has had some luck with these IDE PCI cards please chime in. ;)
O-man7 I wouldn't fear flashing that PCI card but flashing a mobo can be a bit tricky as creaky has already mentioned. ;) You should be able to find a BIOS for the PCI card on the website and if not then you might consider purchasing another one for a few bucks. ;)
Some cards that I would consider.... ;) linky
....gm
|
AfterDawn Addict
7 product reviews
|
28. December 2008 @ 14:28 |
Link to this message
|
Gm, YOU are the man. And I think im in love with ROSEWILL. Very detailed specifications! Wish I could say the same for startech. Oh well... I guess this one goes in the bin for future ebay lot, LOL.
One of the devices you referenced specifically said "Warning:RC-200 is design for hard drive only and can't work with DVD ROM." So it recommends RC208 model. I think I have a winner! :D GM... YOU have a wonderful day, and THANK YOU THANK YOU.
Sorry about off topic, IM DONE HERE.
To delete, or not to delete. THAT is the question! |
Moderator
|
28. December 2008 @ 15:13 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
7 product reviews
|
28. December 2008 @ 15:44 |
Link to this message
|
Here is a verbatim +R 16X burned at (Selected 24X, No 22X option) on the LG-GH22NP20. Please disregard previous problematic ide card trouble, as this drive is attached to onboard ide controller (NON problematic). The speed never exceeded 21.8X, burn completion 4:30sec. Not too bad. A bit noisy, noticing the tray is a bit flimsy too, :( And apparently my LH-20A1H (connected to Problematic card) is able to READ at 4X!
Rather disappointed with neweggs organization. Still my fault for lack of research, but I would have boughten the appropriate card had there site been a little more organized. When running through links, it shows ONLY ONE pci-e 1X card for ide. But running an actual search yields multiple. NOTED, for future ref!
EDITED - for spelling, what else? LOL
To delete, or not to delete. THAT is the question! This message has been edited since posting. Last time this message was edited on 28. December 2008 @ 16:27
|
AfterDawn Addict
|
28. December 2008 @ 23:17 |
Link to this message
|
Just messing around and "dug" some oldies but goodies out of the closet to see how they performed. ;) First one is on the iHAS120 at 8x and the second is on the AD-7200S at 16x. :D Both scanned on the 20A1S. ;)
YUDEN T02 (TY DVD+R 8x)
IMGBURN 8x
YUDEN T02
Nero CD 16x
iHAS120 Nero CD 16x
YUDEN T02
I'm gonna have to burn some more to really see how these drives like the "good stuff". I'm NOT impressed with the iHAS on the good stuff right now, but it does perform well with the "lesser liked" media. lol. :O I will say this.. the Sony/NEC/Optiarc AD-7200S drive is a good one!!!! If you can get one or more (lol...:D) then do it!! I have 2 and they are great drives. :D
...gm
...gm
|
AfterDawn Addict
7 product reviews
|
29. December 2008 @ 00:00 |
Link to this message
|
I'm not positive but I believe, that this is the BEST TYG03 burn that I have seen to date. VERY agreeable! Burned at 8X on my new LG. :D 
Something itching in the back of my mind, tells me that dvd drives firmwares are still not optimized for these babies, :)
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
4 product reviews
|
29. December 2008 @ 15:28 |
Link to this message
|
|
gotta find something to burn.. got a scan itch that need scratched..lol
i got the 7200A and 7200S. im not to sold on the 7200A yet... gonna give it some time. but i might have to find another 7200S...lol
|
AfterDawn Addict
|
29. December 2008 @ 16:05 |
Link to this message
|
Originally posted by cincyrob:
gotta find something to burn.. got a scan itch that need scratched..lol
i got the 7200A and 7200S. im not to sold on the 7200A yet... gonna give it some time. but i might have to find another 7200S...lol
I sold my AD-7200A a while back to Morty when they were hard to find. I'm sure he had a fit when they were going for $21.99 delivered. lol. I have a NIB AD-7200S and iHAS120 just begging for a home.... I've got to get busy with my puters and quick messing around with work and the kiddies.. hehehee. j/k.. you can have the work but the kiddies are TO MUCH fun!!!! :D
...gm
|
AfterDawn Addict
|
29. December 2008 @ 16:12 |
Link to this message
|
Originally posted by greensman:
Originally posted by cincyrob:
gotta find something to burn.. got a scan itch that need scratched..lol
i got the 7200A and 7200S. im not to sold on the 7200A yet... gonna give it some time. but i might have to find another 7200S...lol
I sold my AD-7200A a while back to Morty when they were hard to find. I'm sure he had a fit when they were going for $21.99 delivered. lol. I have a NIB AD-7200S and iHAS120 just begging for a home.... I've got to get busy with my puters and quick messing around with work and the kiddies.. hehehee. j/k.. you can have the work but the kiddies are TO MUCH fun!!!! :D
...gm
Look no further for a home for that AD-7200S. My Asus finally died completely and I need another drive badly. PM or e-mail me.
Thanking you in advance,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
 |
AfterDawn Addict
4 product reviews
|
29. December 2008 @ 17:26 |
Link to this message
|
|
|
AfterDawn Addict
7 product reviews
|
29. December 2008 @ 17:40 |
Link to this message
|
|
sweetness robs! Thanks for the tidbit. Wish mobo flashing was that easy :(
To delete, or not to delete. THAT is the question! |
AfterDawn Addict
|
29. December 2008 @ 18:22 |
Link to this message
|
@rob
I think I'll pass on new firmware my 7200S's doing fine with 1.06!!
|
AfterDawn Addict
4 product reviews
|
29. December 2008 @ 18:46 |
Link to this message
|
Originally posted by garmoon:
@rob
I think I'll pass on new firmware my 7200S's doing fine with 1.06!!
thats why im not doing my 7200S. just my 7200A
|
AfterDawn Addict
4 product reviews
|
29. December 2008 @ 20:33 |
Link to this message
|
tried flashing my 7200A to the 1.09 FW.. ikept getting this error.
this is with the liggy 1.09 bitsetting and the
AD-7200A 1.09 original FW.
GM this is what i was talking about on the phone,
also got a scan from the 7200A after i reflashed it with the 1.06bt fw. burnt at 20x(got upto 17.?) will have the scan and the create.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
29. December 2008 @ 20:34 |
Link to this message
|
Rob is this the link that you used for your d/l? ;) Make sure you chose the correct one and go from there. ;) You know how to read but sometimes the mind plays tricks... ROFL. :P
That should be for the AD-7200A and flash right away. I'm sure if there is some "problem" with the f/w they will post it quick enough. You are using the binflash thingy right?? ;)
Ok the GM is off to mess around and see about flashing some of his drives and do some checking. :)
Scan away my friends.... :D
....gm
|
