|
hi guys,
iv been using DVDShrink and Nero to Burn with as of late no problems, , i was trying to backup a few movies in the last 4 days and have got nothing but coasters at east 9 in a row, i have noticed that the "USER READ BUFFER" goes straight to 100% and then starts to burn, the " Buffer Level" goes to 100% and then were away , but then as the "completed % bar" starts to increase the user read buffer starts to decrease and goes down to 0% and also the buffer level fluciates up and down and then about 20% into the burn i get a failure,
im using the same discs , Laser tygo4's , in my sony dru-700a , with all firmware and nero updates in place,and i run nothing else when i burn, here is a copy of the last Log file, any help would be appreciated
regards
Steve
UDF/ISO compilation
2:15:46 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
2:15:46 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
2:15:46 PM #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:15:46 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
2:15:46 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
2:15:46 PM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-700A running
2:15:46 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
2:15:46 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
2:15:46 PM #9 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media
2:15:46 PM #10 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1470383 (326:45.08, 2871MB)
2:15:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
2:15:46 PM #12 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
2:15:46 PM #13 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:15:46 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1470384 (1470384) = #1470384/326:45.9
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1470384 blocks [SONY DVD RW DRU-700A]
--------------------------------------------------------------
2:15:46 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-700A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3011346432, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1470384 | lead-out | 1 | 0x41 | 0x00
2:15:47 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:15:47 PM #17 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
2:15:47 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:15:47 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
2:15:47 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:15:47 PM #21 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode
2:15:47 PM #22 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
2:15:47 PM #23 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes
2:15:47 PM #24 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:15:47 PM #25 CDR -1207 File DVDR.cpp, Line 4805
Book Type automatically set to: Current recorder setting
2:16:28 PM #26 Text 0 File Cdrdrv.cpp, Line 1284
14:16:28.187 - SONY DVD RW DRU-700A\H1 T1 : Queue again later
2:22:53 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03EB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0A 0x78 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
2:22:53 PM #28 CDR -1135 File Writer.cpp, Line 311
Write error
2:22:53 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:22:53 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:22:53 PM #31 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was 686143
2:22:53 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
|
