|
|
|
Nero Error - illegal disk - Please Help
|
|
|
laptop9
Newbie
|
7. December 2005 @ 21:36 |
Link to this message
|
|
@attar
. . . .
experts...?
followed instructions, didnt work out. same error.
"If Tyranny and Oppression come to this land, it will be in the guise of fighting a foreign enemy." - James Madison
|
|
Advertisement
|
|
|
|
Moderator
|
7. December 2005 @ 21:41 |
Link to this message
|
|
@laptop9 -
you're on my list, i've got a shedload of work to get thru first. sorry i'm normally straight in there but i've gotta get this stuff done. have a look at my replies in that link for now, and see if it helps at all with your logfile.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
simoza
Newbie
|
12. December 2005 @ 11:11 |
Link to this message
|
|
Hy, I'm first time here...
I have the same problem of can't be able to write a dvd. The notice is illegal disk. So, reading the post, i have upgraded the burn firmware. My bruning machine is a Freecom.
Weel, after upgrading, i have the same errors, so I've unistalled nero 6.6.0.1 the installed again. Now my burning process start, but when my process come to 100% nero show the follow message.
Burn process failed at 4x.
The log is:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16.51.12
Nero version: 6.6.0.1
Recorder: <FREECOM_ DVD+/-RW4B> Version: 1.34 - HA 3 TA 0 - 6.6.0.1
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <V386 STEALTH DVD >Version: 1.0h - HA 0 TA 0 - 6.6.0.1
Adapter driver: <Stealth> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : V386 STEALTH DVD 1.0h Stealth Port 0 ID 0 DMA: Off
DiskPeripheral : IC25N030ATCS04-0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC DW-224E atapi Port 2 ID 0 DMA: On
=== CDRom-Device-Map ===
V386 STEALTH DVD F: CDRom1
TEAC DW-224E D: CDRom0
FREECOM_ DVD+/-RW4B E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (521712kB)
Free physical memory: 302MB (309888kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.12.2005
UDF/ISO compilation
21.41.15 #1 Phase 112 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation started
21.41.15 #2 Phase 114 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation completed (no file modified)
21.41.15 #3 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21.41.16 #4 Phase 111 File dlgbrnst.cpp, Line 1853
DVD-Video files sorted
21.41.19 #5 Text 0 File Reader.cpp, Line 127
Reader running
21.41.19 #6 Text 0 File Writer.cpp, Line 122
Writer FREECOM_ DVD+/-RW4B running
21.41.19 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
21.41.19 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
21.41.19 #9 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
21.41.19 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
21.41.19 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
21.41.19 #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: FREECOM_ DVD+/-RW4B, Media type: DVD-R
Disc Manufacturer: GSC002 -
Disc Application Code: 64, Disc Physical Code: 193
21.41.19 #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21.41.19 #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [FREECOM_ DVD+/-RW4B]
--------------------------------------------------------------
21.41.19 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [FREECOM_ DVD+/-RW4B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41
21.41.31 #16 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started
21.41.31 #17 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
21.41.31 #18 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed
21.41.31 #19 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 4x (5.540 KB/s)
21.41.31 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21.41.31 #21 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 14:10,279 (850279ms) -> OK
21.41.31 #22 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode
21.41.31 #23 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON
21.41.31 #24 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes
21.41.31 #25 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21.41.47 #26 Text 0 File Cdrdrv.cpp, Line 1284
21:41:47.143 - FREECOM_ DVD+/-RW4B\H3 T0 : Queue again later
21.55.39 #27 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03360000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x22 0x51 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
21.55.39 #28 CDR -1135 File Writer.cpp, Line 311
Write error
21.55.39 #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
21.55.39 #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
21.55.39 #31 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was 2249087
21.55.39 #32 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
21.55.40 #33 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
21.55.40 #34 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 19.37.14 (Prassi/Veritas driver for win 2K)
File 'Drivers\stealth.sys': Ver=3.16.0.0, size=80896 bytes, created 21/06/2002 9.58.24 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Now I try to view the disc but I can't.
How can resolve this problem?
Thx, sorry for the english i?m italian
This message has been edited since posting. Last time this message was edited on 12. December 2005 @ 11:48
|
|
HugoFSous
Newbie
|
27. December 2005 @ 08:26 |
Link to this message
|
I've not been able to burn a DVD for a week...
I used to do it, but now, i've got a message that tells that disc is ilegal... Here is the log (hope u can help me):
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23-12-1997 0:23:24
ahead WinASPI: File 'C:\Programas\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: < DVD+RW RW8165> Version: 1.01 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < DVD+RW RW8165 >Version: 1.01 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2040AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
DVD+RW RW8165 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 56MB (57964kB)
Memory in use : 88
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.12.2005
Compilação ISO
15:09:41 #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15:09:41 #2 Text 0 File Reader.cpp, Line 127
Reader running
15:09:41 #3 Text 0 File Writer.cpp, Line 122
Writer DVD+RW RW8165 running
15:09:41 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
15:09:41 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
15:09:41 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2147839 (477:17.64, 4194MB)
15:09:41 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
15:09:41 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVD+RW RW8165, Media type: DVD+R
15:09:41 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:09:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2147840 (2147840) = #2147840/477:17.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2147840 blocks [DVD+RW RW8165]
--------------------------------------------------------------
15:09:45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVD+RW RW8165] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4398776320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2147840 | lead-out | 1 | 0x41 | 0x00
15:09:45 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
15:09:45 #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
15:09:45 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
15:09:45 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)
15:09:45 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:09:45 #17 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BC10600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
15:09:45 #18 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
15:09:45 #19 Text 0 File DVDR.cpp, Line 6168
Drive: DVD+RW RW8165
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
15:09:45 #20 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
15:09:45 #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: No
15:09:47 #22 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06E20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
15:09:47 #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
15:09:47 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15:09:48 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
15:09:48 #26 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
15:09:48 #27 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
15:09:48 #28 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
15:09:48 #29 Text 0 File DVDR.cpp, Line 6168
Drive: DVD+RW RW8165
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
15:09:48 #30 CDR -1046 File WriterStatus.cpp, Line 167
Illegal disc
DVD+RW RW8165\H1 T0
15:09:48 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
15:09:48 #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23-12-1997 1:02:46
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20-12-2004 18:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 5:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
28. December 2005 @ 03:55 |
Link to this message
|
@simoza -
hi and welcome, let's see if i can get you burning up a storm..
Quote:
Nero version: 6.6.0.1
- not too bad, 6.6.0.18 is latest 6.x version; (i used 6.6.0.0 with zero problems for quite a while myself)
Quote:
Recorder: <FREECOM_ DVD+/-RW4B> Version: 1.34
- i don't see many Freecom drives around these days. anyway, this link seems to have an older version of your firmware, 1.33, and that's dated April 2004!!, so unless Freecom's website has newer firmware, you're gonna have to stick to older blank discs (i know this drive is an OEM NEC ND-1300A so you're limited as to what speed blank media you can buy)
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
- 4465MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Recorder: FREECOM_ DVD+/-RW4B, Media type: DVD-R
Disc Manufacturer: GSC002 -
Disc Application Code: 64, Disc Physical Code: 193
- i've heard of these discs but can't remember any details about them, or if they're any good
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Write error
- i'd try better blank discs as there's not much else wrong in the logfile
@HugoFSous -
hi and welcome also, let's see if i can get you burning up a storm too..(edit- no we won't as i recognise the problem straight away, your burner's firmware is too old)...here goes anyway.....
Quote:
Recorder: < DVD+RW RW8165> Version: 1.01
- version 1.03 of your firmware is here, but dated April 2004!!, so the firmware is way out of date to cope with newer media.. - http://forum.rpc1.org/dl_firmware.php?download_id=1815
Quote:
Physical memory : 510MB (523248kB)
Free physical memory: 56MB (57964kB)
Memory in use : 88
- sufficient total memory but no free memory left. you need to close down more programs prior to ALL burning/dvd work to ensure sufficient free memory
Quote:
Recorder: DVD+RW RW8165, Media type: DVD+R
- your blank discs aren't being recognised, due to the firmware being so old. this is similar to what you should see - Quote:
Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
- ie a 3line paragraph when the firmware's up to date. The firmware has been neglected by Ricoh since April 2004 (unless their own website has something newer though i very much doubt it). see here for more info as i've gone into much detail on this particular drive/firmware over last few days - http://forums.afterdawn.com/thread_view.cfm/265841
Quote:
Illegal disc
- see previous comment
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 28. December 2005 @ 03:55
|
|
HugoFSous
Newbie
|
30. December 2005 @ 16:07 |
Link to this message
|
To creaky
Quote:Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
- ie a 3line paragraph when the firmware's up to date. The firmware has been neglected by Ricoh since April 2004 (unless their own website has something newer though i very much doubt it). see here for more info as i've gone into much detail on this particular drive/firmware over last few days - http://forums.afterdawn.com/thread_view.cfm/265841
i didn't understand this part...Sorry...Problems translating to portuguese...if u could explain it, in fewer words...or simpler...tks
I really hope to fix this problem, 'cause i'm really pissed (sorry if i can't say it here) with this... Really annoying to not be able to burn my dvd's...
Tks
Ps. : how do i install firmware, once it's in a ric extension...
Tks
This message has been edited since posting. Last time this message was edited on 31. December 2005 @ 06:58
|
Moderator
|
31. December 2005 @ 10:30 |
Link to this message
|
@HugoFSous -
snippet from the link i gave you in my logfile reply Quote:
you're gonna hae to use 'older media' that your burner can actually recognise.
- Basically you need to keep finding older blank discs that your burner is able to use, as it's unable to use those newer discs. Or you need to buy a new burner (and i'd stay away from Ricoh, they don't seem to support their products for very long)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
greavsy
Newbie
|
2. January 2006 @ 02:41 |
Link to this message
|
|
oreyt people help badly needed been looking for my updates but cant find anything when i try to burn dvds now or copy it says illegal disc really doing my headin i have a NEC Dvd rw nd 2500-a and have never updated the flash if someone could point me in the right direction i would be very thankful
|
Moderator
|
2. January 2006 @ 02:59 |
Link to this message
|
@greavsy -
let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.
You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
greavsy
Newbie
|
2. January 2006 @ 03:18 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:35:34
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DTS6 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160022A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 3 DMA: Off
CdRomPeripheral : Nero IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvscsi Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
JLMS XJ-HD166S J: CDRom0
_NEC DVD_RW ND-2500A K: CDRom1
AXV CD/DVD-ROM L: CDRom3
Generic DVD-ROM M: CDRom4
Generic DVD-ROM E: CDRom5
Generic DVD-ROM N: CDRom6
Generic DVD-ROM O: CDRom7
NERO IMAGEDRIVE2 D: CDRom2
AXV CD/DVD-ROM P: CDRom8
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 172MB (176684kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2006
UDF/ISO compilation
13:05:18 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
13:05:18 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
13:05:18 #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
13:05:18 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
13:05:18 #5 Text 0 File Reader.cpp, Line 127
Reader running
13:05:18 #6 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
13:05:18 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
13:05:18 #8 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
13:05:18 #9 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 908335 (201:51.10, 1774MB)
13:05:18 #10 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
13:05:18 #11 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
13:05:18 #12 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:05:18 #13 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 908336 (908336) = #908336/201:51.11
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 908336 blocks [_NEC DVD_RW ND-2500A]
--------------------------------------------------------------
13:05:18 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1860272128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
908336 | lead-out | 1 | 0x41 | 0x00
13:05:19 #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
13:05:19 #16 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
13:05:19 #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
13:05:19 #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
13:05:19 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:05:19 #20 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
13:05:19 #21 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON
13:05:19 #22 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
13:05:19 #23 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
13:05:19 #24 SCSI -1046 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x0D 0xDC 0x30 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
13:05:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765
Illegal disc
13:05:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765
Could not perform start of Disc-at-once
13:05:19 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.1.1.42 , size=24698 bytes, created 09/01/2004 15:01:56
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 18:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 00:27:50 (Adapter driver for rec)
|
Moderator
|
2. January 2006 @ 03:24 |
Link to this message
|
@greavsy -
Quote:
Nero Version: 6.6.0.8 (Nero Express)
- Nero's a bit old, latest 6.x version is 6.6.0.18, you might want to download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php
Quote:
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06
- firmware's a few versions out of date, 1.0A is here - http://forum.rpc1.org/dl_firmware.php?download_id=1740
Quote:
Physical memory : 510MB (523244kB)
Free physical memory: 172MB (176684kB)
Memory in use : 66 %
- sufficient total memory but you need to always ensure sufficient free memory by closing down more programs prior to dvd work/burning
Quote:
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
- not very good quality discs
Quote:
Illegal disc
- see previous comment
Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.1.1.42 , size=24698 bytes, created 09/01/2004 15:01:56
- CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.microadvantage.net/utilities
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 03:24
|
|
greavsy
Newbie
|
2. January 2006 @ 03:46 |
Link to this message
|
An error occurrd during the copy process (file name: Nero wave editor\dxenum.exe).
Error: 5
Access is denied
Please reboot your comp and try
what do i do here PAL :s tried bout 4 times
|
|
greavsy
Newbie
|
2. January 2006 @ 03:56 |
Link to this message
|
sorted top one Nero installed but i still cant find that 1.0a on that link you gave me am i thick lol :S could you help me even more and post a direct link
|
Moderator
|
2. January 2006 @ 04:27 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
greavsy
Newbie
|
2. January 2006 @ 07:01 |
Link to this message
|
|
@ creaky
thanks a lot for all your help mate got it all sorted ur a legend
|
Moderator
|
2. January 2006 @ 07:47 |
Link to this message
|
|
hey cool, happy burning
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
2. January 2006 @ 09:36 |
Link to this message
|
|
@creaky
Back on Dec 8, 'laptop9' was left kind of hanging.
I was of no help and I don't see where you jumped in to clear up the problem.
If you did, please forgive.Age related.
|
Moderator
|
2. January 2006 @ 10:14 |
Link to this message
|
@attar - quite right, laptop9 was indeed left hanging on Dec 8. Oops :)
@laptop9 -
Quote:
Nero Version: 6.6.0.16
- not too bad, 6.6.0.18 is latest 6.x version
Quote:
Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.24
- firmware's up to date - http://forum.rpc1.org/dl_firmware.php?download_id=1920
Quote:
DiskPeripheral : IC25N040ATCS05-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SW3934E UYO908Z 1.0 dtscsi Port 2 ID 0 DMA: Off
- DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Not sure what 'dtscsi' ports are but see if the DMA fix works
Quote:
Physical memory : 511MB (523704kB)
Free physical memory: 286MB (293212kB)
Memory in use : 44 %
- make sure to free up more memory prior to ALL dvd work/burning
Quote:
Illegal disc
- see if the DMA fix works
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 10:15
|
|
JebusC
Newbie
|
3. January 2006 @ 03:43 |
Link to this message
|
creaky you've been helping this thread for almost a year. we all appreciate it. if you get the time i cant seem to figure this out.
I have firmware updated (1.72) Nero updated (i think) and i dont think its the media. i just dont know anymore.....here the log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.72 - HA 3 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 4 TA 0 - 6.6.0.18
Adapter driver: <d347prt> HA 4
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : ATAPI CD-RW 52X24 atapi Port 3 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A D: CDRom0
ATAPI CD-RW 52X24 E: CDRom1
Generic DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572332kB)
Free physical memory: 862MB (882704kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.1.2006
UDF/ISO compilation
5:38:10 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
5:38:10 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
5:38:10 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:38:10 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
5:38:10 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
5:38:10 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:38:10 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:38:10 AM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
5:38:10 AM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1920831 (426:51.06, 3751MB)
5:38:10 AM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)
5:38:10 AM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
5:38:10 AM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:38:10 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1920832 (1920832) = #1920832/426:51.7
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1920832 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
5:38:11 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3933863936, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1920832 | lead-out | 1 | 0x41 | 0x00
5:38:11 AM #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:38:11 AM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
5:38:11 AM #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:38:11 AM #18 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2.4x (3,324 KB/s)
5:38:11 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:38:11 AM #20 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
5:38:11 AM #21 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
5:38:11 AM #22 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
5:38:11 AM #23 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:38:11 AM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x1D 0x4F 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
5:38:11 AM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
5:38:11 AM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
5:38:11 AM #27 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/10/2005 3:04:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 3:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
3. January 2006 @ 04:36 |
Link to this message
|
@JebusC -
Quote:
creaky you've been helping this thread for almost a year. we all appreciate it. if you get the time i cant seem to figure this out.
- cheers; i rarely unsubscribe from threads so they always pop up again when added to over time, no escape for the wicked :)
Quote:
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.72
- see here -
http://forum.rpc1.org/dl_firmware.php?download_id=1517
- i take it your drive is a Gateway OEM drive then ?
Quote:
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
- not very good media
Quote:
Illegal disc
- see previous comment
Quote:
Simulation failed at 2.4x (3,324 KB/s)
- simulations are always a good test to stop wasting discs, nice one
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
3. January 2006 @ 05:58 |
Link to this message
|
Try burning at 4x my NEC 1300A does not like burning at 2.4X in Nero, always get an error at that speed. And creaky is right you are not using the best of media, IMHO if these are 16x disks I would try an 8x media and see if this works. Just my two cents.
|
AfterDawn Addict
|
3. January 2006 @ 08:23 |
Link to this message
|
NEC support for that drive shows only the following (referring to DVD-R):
Quote:
DVD WRITABLE MEDIA
a) DVD-R Media (4x/2x, 4.7GB For General DISC)
Mitsubishi (Verbatim), Taiyo-Yuden, PVC, Fuji Film, Ritek
Presumably referring to the actual code that the media presents using DVDinfo, etc, rather than the label on the package.
|
|
Brandonv2
Newbie
|
18. January 2006 @ 18:38 |
Link to this message
|
I too am getting the horrid Illegal disk error. I've checked the firmware, DMA settings, went through msconfig and deselected everything but Nero and still get it. I haven't tried different media yet, but I have messed with record speed. I appreciate all the help.
-Brandon
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 7:03:36 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <Memorex DVD+/-RW True8Xn>Version: 1.G2 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Memorex DVD+/-RW True8Xn>Version: 1.G2 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-00AUA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-00AUA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W4012A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Memorex DVD+/-RW True8Xn atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
Memorex DVD+/-RW True8Xn E: CDRom1
PLEXTOR CD-R PX-W4012A F: CDRom0
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 52428800 (52428800) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1279MB (1310176kB)
Free physical memory: 935MB (958140kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.1.2006
ISO compilation
8:35:47 PM #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:35:47 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
8:35:47 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
8:35:47 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
8:35:47 PM #5 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
8:35:47 PM #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 607 ( 0:08.07, 1MB)
8:35:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
8:35:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: Memorex DVD+/-RW True8Xn, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
8:35:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:35:47 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [E: Memorex DVD+/-RW True8Xn]
--------------------------------------------------------------
8:35:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: Memorex DVD+/-RW True8Xn] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
608 | lead-out | 1 | 0x41 | 0x00
8:35:47 PM #12 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:35:47 PM #13 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
8:35:47 PM #14 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
8:35:47 PM #15 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
8:35:47 PM #16 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 2.4x (3,324 KB/s)
8:35:47 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:35:47 PM #18 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession
8:35:47 PM #19 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON
8:35:47 PM #20 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
8:35:47 PM #21 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:35:47 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 00 02 60 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
8:35:47 PM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1783
Illegal disc
E: Memorex DVD+/-RW True8Xn
8:35:47 PM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
Could not perform start of Disc-at-once
8:35:47 PM #25 Phase 34 File dlgbrnst.cpp, Line 1724
Simulation failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 7:03:36 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/27/2003 8:02:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/7/2005 3:42:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 1, size=29312 bytes, created 9/7/2005 3:42:32 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 1, size=8704 bytes, created 9/7/2005 3:42:58 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Kenster1
Newbie
|
19. January 2006 @ 12:14 |
Link to this message
|
Hey thanks to the numerous responses in the threads I've poured over, I can now burn DVDs!
I had a similar problem with numerous people -- I could burn CDRs but could not burn DVDs -- I would get the "illegal disc" error.
Lo & behold I was using the Memorex 16x DVD-R !!! I tried several of them from my 50-pack with the same error. You guys were right about Memorex being crap!!! I went out and bought Maxwell 8x DVD-R and it worked like a charm.
By the way, I'm using Nero 6.6.0.15
|
|
Advertisement
|
|
|
Moderator
|
19. January 2006 @ 22:26 |
Link to this message
|
@Kenster1 - hey good work :)
@Brandonv2 -
Quote:
Nero Version: 7.0.0.0
- 7.0.1.4b is here - http://www.nero.com/nero7/eng/nero7-up.php
Quote:
Recorder: <Memorex DVD+/-RW True8Xn>Version: 1.G2
- firmware's up to date
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 607 ( 0:08.07, 1MB)
- 1MB, that doesn't sound good
Quote:
Recorder: Memorex DVD+/-RW True8Xn, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
- if other suggestions don't help, maybe try better media
Quote:
Illegal disc
- see previous comment
Quote:
Simulation failed at 2.4x (3,324 KB/s)
- simulation's a great idea but why so slow ?. try 4x
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/7/2005 3:42:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 1, size=29312 bytes, created 9/7/2005 3:42:32 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 1, size=8704 bytes, created 9/7/2005 3:42:58 PM (InCD4 driver for win NT/2K/XP)
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 19. January 2006 @ 22:26
|
|
