|
|
|
Illegal Disc error using Nero
|
|
|
homer985
Suspended due to non-functional email address
|
3. August 2005 @ 09:44 |
Link to this message
|
|
I see this has been discussed in here before, but I'm now stuck with it. Trying to create a data DVD disc - copying WAV files only to DVD-R disc's. After caching, it dies. Below is the log from Nero of the session, and below that is a log of disc indentifier (I'm using Sony DVD-R and the latest 'Ultra' version of Nero):
HELP! TIA
----------------------------------------------------------------------
*************
*************
1A*********** (serial number obvious withheld)
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h
Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Lite-On LTN486S 48x Max >Version: YDS6 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L030AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Lite-On LTN486S 48x Max atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW0404N atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
Lite-On LTN486S 48x Max D: CDRom0
TDK DVDRW0404N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 638MB (653808kB)
Free physical memory: 87MB (89920kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.8.2005
ISO compilation
1:16:09 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:16:09 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
1:16:09 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:16:09 PM #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
1:16:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2275039 (505:33.64, 4443MB)
1:16:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
1:16:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
1:16:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:16:09 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2275040 (2275040) = #2275040/505:33.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2275040 blocks [TDK DVDRW0404N]
--------------------------------------------------------------
1:16:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TDK DVDRW0404N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4659281920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2275040 | lead-out | 1 | 0x41 | 0x00
1:16:09 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:25:58 PM #12 TRANSFER -15 File ThreadedTransfer.cpp, Line 1780
Cache file too small - not all files could be cached
1:26:05 PM #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
1:26:05 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:27:06 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
1:27:07 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:27:07 PM #17 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode
1:27:07 PM #18 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Buffer underrun protection -> ON
1:27:07 PM #19 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: Yes
1:27:07 PM #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:27:07 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xB6 0xE0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
1:27:07 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1763
Illegal disc
1:27:07 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1763
Could not perform start of Disc-at-once
1:27:07 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----------------------------------------------------------------------
Unique Disc Identifier : [DVD-R:SONY08D1]
----------------------------------------------------------------------
Disc & Book Type : [DVD-R] - [DVD-R]
Manufacturer Name : [Sony Recording Media Co.]
Manufacturer ID : [SONY08D1]
Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]
----------------------------------------------------------------------
|
|
Advertisement
|
|
|
|
Moderator
|
3. August 2005 @ 13:30 |
Link to this message
|
@homer985 -
Quote:
Recorder: <TDK DVDRW0404N> Version: 1.08
- your firmware is 3 versions behind, 1.0C is out now - http://forum.rpc1.org/dl_firmware.php?download_id=1596
Quote:
Physical memory : 638MB (653808kB)
Free physical memory: 87MB (89920kB)
Memory in use : 86 %
- wow, where's all that memory gone ?, your hard drive will start 'swapping'. Free up way more memory prior to burns by closing more programs down.
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2275039 (505:33.64, 4443MB)
- fyi, you're burning extremely close to outer edge of discs
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 3. August 2005 @ 13:30
|
|
homer985
Suspended due to non-functional email address
|
4. August 2005 @ 11:54 |
Link to this message
|
|
Thanks a bunch! That worked. Upgraded the Firmware, and it worked like a charm.
Thanks again!
|
AfterDawn Addict
|
4. August 2005 @ 11:57 |
Link to this message
|
|
hi
creaky i got love this guy!
nice one mate
Nothing here to see, move along folks.
 |
Moderator
|
4. August 2005 @ 12:03 |
Link to this message
|
|
YAY another happy customer, happy burning
tweak & burn
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
4. August 2005 @ 12:07 |
Link to this message
|
|
hi
tweak and burn - excellant that is your catch phrase from now on thats great!
love it - tweak and burn!
they could call an ap that you know.....
creaky the tweak and burn kid! the fastest nero logger in town!
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 4. August 2005 @ 12:07
|
Moderator
|
4. August 2005 @ 12:08 |
Link to this message
|
|
i was jokin with ddp one day about his 'teach & learn' so i did tweak & burn for a laugh, so i use it whenever someone gets sorted out :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
hackedoff
Newbie
|
17. August 2005 @ 08:01 |
Link to this message
|
Hi all, I receive an illegal disc error as well! Trying to create a DVD data disk using TDK DVD-R disks. Have no clue on how to fix it so need your help!
Logfile is posted below. Many thanks in advance!
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD-ROM DDU1621 >Version: S3.5 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-00DAA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD-ROM DDU1621 atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A F: CDRom0
SONY DVD-ROM DDU1621 Z: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 334MB (342268kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.8.2005
ISO compilation
16:06:26 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
16:06:26 #2 Text 0 File Reader.cpp, Line 127
Reader running
16:06:26 #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
16:06:26 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
16:06:26 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 386703 ( 85:56.03, 755MB)
16:06:26 #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
16:06:26 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
16:06:26 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:06:26 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 386704 (386704) = #386704/85:56.4
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 386704 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
16:06:26 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 791969792, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
386704 | lead-out | 1 | 0x41 | 0x00
16:06:26 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
16:06:28 #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
16:06:28 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
16:06:28 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
16:06:28 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:06:28 #16 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
16:06:28 #17 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
16:06:28 #18 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
16:06:28 #19 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 00 00 00 00 00 .`...0@P........
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:06:28 #20 SCSI -1046 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x05 0xE6 0x90 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
16:06:28 #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1771
Illegal disc
16:06:28 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1771
Could not perform start of Disc-at-once
16:06:29 #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 13:05:04 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
17. August 2005 @ 08:10 |
Link to this message
|
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
Moderator
|
17. August 2005 @ 08:13 |
Link to this message
|
|
@hackedoff -
other than your DMA being off, which cougar_ii has just pointed out, the burner's firmware is up to date, so all that's left to suggest is for you to try better media..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Moderator
|
17. August 2005 @ 12:52 |
Link to this message
|
have requested thread be moved to Nero forum
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Moderator
|
17. August 2005 @ 16:01 |
Link to this message
|
|
Teleported :)
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33 |
|
mhalfpen
Newbie
|
26. November 2005 @ 05:10 |
Link to this message
|
Hey can anybody help with this illegal disc error in Nero.
Here is the log file
Thxs
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.08 - HA 2 TA 0 - 6.6.0.13
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-1300A >Version: 1.08 - HA 2 TA 0 - 6.6.0.13
Adapter driver: <> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23CA-30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2102 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R2102 D: CDRom1
_NEC DVD_RW ND-1300A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (515052kB)
Free physical memory: 206MB (211808kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.11.2005
ISO compilation
10:02:18 AM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:02:18 AM #2 Text 0 File Reader.cpp, Line 127
Reader running
10:02:18 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
10:02:18 AM #4 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
10:02:18 AM #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1515391 (336:45.16, 2959MB)
10:02:18 AM #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:02:18 AM #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
10:02:18 AM #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:02:18 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1515392 (1515392) = #1515392/336:45.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1515392 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
10:02:18 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3103522816, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1515392 | lead-out | 1 | 0x41 | 0x00
10:02:19 AM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:02:19 AM #12 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
10:02:19 AM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:02:19 AM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
10:02:19 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:02:19 AM #16 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
10:02:19 AM #17 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
10:02:19 AM #18 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
10:02:19 AM #19 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:02:19 AM #20 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x17 0x1F 0x80 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0B
0x00 0x00 0x00 0x00 0x30 0x05
10:02:19 AM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765
Illegal disc
10:02:19 AM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765
Could not perform start of Disc-at-once
10:02:19 AM #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 01/02/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
26. November 2005 @ 09:02 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 26. November 2005 @ 09:53
|
|
mhalfpen
Newbie
|
26. November 2005 @ 14:25 |
Link to this message
|
|
Thxs, firmware upgrade worked like a charm.
I found version 1.0C and it seems to work.
|
AfterDawn Addict
|
27. November 2005 @ 01:24 |
Link to this message
|
@mhalfpen
Can you post a new Nero log for comparison?
|
|
lieblm
Newbie
|
9. December 2005 @ 05:05 |
Link to this message
|
Hello,
I've got problem with the "Illegal Disk" in Nero 6. My TEAC DVD-writer has latest firmware, I already burned some DVDs without problems. Now I use Verbatim media. I can burn on Verbatim CD-R ok but using Verbatim DVD-R gives me this error. I've studied this and thread and others and tried all the hints (including DMA reset) but with no success. Do you really think I just got bad Verbatim media packet?
Here is the log file:
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21.12.2003 4:26:58
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16.12.2003 20:18:06
Nero version: 6.3.1.17
Recorder: <TEAC DV-W516G> Version: B4S6 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TEAC DV-W516G >Version: B4S6 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC DV-W516G atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TEAC DV-W516G E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654836kB)
Free physical memory: 379MB (388728kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.12.2005
UDF/ISO compilation
13:10:32 #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
13:10:32 #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
13:10:32 #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:10:32 #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
13:10:32 #5 Text 0 File Reader.cpp, Line 118
Reader running
13:10:32 #6 Text 0 File Writer.cpp, Line 124
Writer TEAC DV-W516G running
13:10:32 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
13:10:32 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
13:10:33 #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
13:10:33 #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2278111 (506:14.61, 4449MB)
13:10:33 #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
13:10:33 #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TEAC DV-W516G, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
13:10:33 #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:10:33 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2278112 (2278112) = #2278112/506:14.62
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278112 blocks [TEAC DV-W516G ]
--------------------------------------------------------------
13:10:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TEAC DV-W516G ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665573376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2278112 | lead-out | 1 | 0x00 | 0x41
13:10:33 #16 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
13:10:33 #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
13:10:33 #18 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
13:10:33 #19 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 1x (1 385 KB/s)
13:10:33 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:10:33 #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 56:14,542 (3374542ms) -> OK
13:10:33 #22 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode
13:10:33 #23 Text 0 File Mmc.cpp, Line 20401
Set BUFE: BURN-Proof -> ON , Generic write control : ON
13:10:33 #24 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes
13:10:33 #25 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
13:10:38 #26 SCSI -1046 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0E560000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
13:10:38 #27 CDR -1046 File Writer.cpp, Line 304
Illegal disc
13:10:38 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
13:10:38 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
13:10:38 #30 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was -1
13:10:38 #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
13:10:38 #32 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
13:10:38 #33 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 1x (1 385 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 2.3.2001 19:55:54
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 2.3.2001 19:55:54
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 21.12.2003 4:26:57
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 31.5.2005 23:36:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19.6.2003 12:05:04 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for help!
|
Senior Member
|
9. December 2005 @ 05:56 |
Link to this message
|
Hi there,
Quote:
Nero version: 6.3.1.17
Recorder: <TEAC DV-W516G> Version: B4S6 - HA 1 TA 0 - 6.3.1.17
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
Your Nero version is outdated, it doesn't recognise your drive properly.
Latest v6 Nero is v6.6.0.18
or upgrade to v7.0.1.2
You do have the latest firmware on your drive, so I would try to upgrade Nero.
Quote:
Recorder: TEAC DV-W516G, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Media quality seems to be ok !
Quote:
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 2.3.2001 19:55:54
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 2.3.2001 19:55:54
These are Packet Writting drivers from Roxio, if you really don't use Direct CD, or whatever they call it now, get rid of it.
They will cause you more problems that pleasure !
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
AfterDawn Addict
|
9. December 2005 @ 06:03 |
Link to this message
|
|
hi cougar
you beat me to it on drivers...
the roxio strikes again ...........................
im still on v6 Nero is v6.6.0.13 all ok here.....
Nothing here to see, move along folks.
This message has been edited since posting. Last time this message was edited on 9. December 2005 @ 06:04
|
|
lieblm
Newbie
|
10. December 2005 @ 02:04 |
Link to this message
|
Thanks for hints guys!
However, still no success.
I got rid of those Roxio drivers, updated Nero for 6.6.0.18, but the problem is still the same. Here is the log file for unsuccessful DVD write:
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21.12.2003 4:26:58
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <TEAC DV-W516G> Version: B4S6 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TEAC DV-W516G >Version: B4S6 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC DV-W516G atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TEAC DV-W516G E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654836kB)
Free physical memory: 338MB (346644kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.12.2005
UDF/ISO compilation
20:58:58 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
20:58:59 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
20:58:59 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:58:59 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
20:58:59 #5 Text 0 File Reader.cpp, Line 127
Reader running
20:58:59 #6 Text 0 File Writer.cpp, Line 122
Writer TEAC DV-W516G running
20:58:59 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
20:58:59 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
20:58:59 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
20:59:21 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2278111 (506:14.61, 4449MB)
20:59:21 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
20:59:21 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TEAC DV-W516G, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
20:59:21 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R DL.)
20:59:21 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2278112 (2278112) = #2278112/506:14.62
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278112 blocks [TEAC DV-W516G]
--------------------------------------------------------------
20:59:21 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TEAC DV-W516G] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665573376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2278112 | lead-out | 1 | 0x41 | 0x00
20:59:21 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:59:21 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
20:59:21 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:59:21 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 1x (1 385 KB/s)
20:59:21 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:59:21 #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
20:59:21 #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: BURN-Proof -> ON , Adapt writespeed to disc : ON
20:59:21 #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
20:59:21 #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:59:23 #25 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A6C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
20:59:23 #26 CDR -1046 File Writer.cpp, Line 311
Illegal disc
20:59:23 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:59:23 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
20:59:23 #29 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
20:59:23 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 1x (1 385 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 21.12.2003 4:26:57
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 31.5.2005 23:36:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19.6.2003 12:05:04 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I again to write on CD (Vermatim brand as well) and it went *almost* ok, I got an error when verifying data. However, the data on the disk seems to be ok, I copied the again on the disk and verified ok. Here is the session log for this CD write session:
indows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21.12.2003 4:26:58
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <TEAC DV-W516G> Version: B4S6 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TEAC DV-W516G >Version: B4S6 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC DV-W516G atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TEAC DV-W516G E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654836kB)
Free physical memory: 295MB (303020kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.12.2005
CD-ROM (ISO)
12:18:17 #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:18:17 #2 Text 0 File Burncd.cpp, Line 2948
TEAC DV-W516G
BURN-Proof activated
12:18:17 #3 Text 0 File Reader.cpp, Line 127
Reader running
12:18:17 #4 Text 0 File Writer.cpp, Line 122
Writer TEAC DV-W516G running
12:18:17 #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:18:17 #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media
12:18:18 #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 358845 ( 79:46.45)
12:18:18 #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:18:18 #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TEAC DV-W516G;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
12:18:18 #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:18:18 #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358846 (358846) = #358846/79:44.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358844 blocks [TEAC DV-W516G]
--------------------------------------------------------------
12:18:18 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TEAC DV-W516G] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 735223808, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
358846 | lead-out | 1 | 0x41 | 0x00
12:18:18 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 358846 -> 358844.
12:18:18 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:18:18 #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:18:18 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:18:18 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (1 200 KB/s)
12:18:18 #18 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03E75000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02
12:18:18 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:18:18 #20 Text 0 File Mmc.cpp, Line 21774
Set BUFE: BURN-Proof -> ON , Adapt writespeed to disc : ON
12:28:27 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:28:30 #22 Text 0 File Mmc.cpp, Line 16452
<TEAC DV-W516G > start Close Session
12:29:05 #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (1 200 KB/s)
12:29:05 #24 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
12:29:08 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 358846 -> 358844.
12:31:31 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:31:31 #27 SectorVerify 11 File Cdrdrv.cpp, Line 9998
Sector 314734 on disc has different content to source
12:31:32 #28 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 21.12.2003 4:26:57
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 31.5.2005 23:36:01 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19.6.2003 12:05:04 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Do you think I really have to upgrade to v7 of Nero? Or should I try another burning sw (like DeepBurner)?
If you find anything interesting in the log files, please let me know. And thanks for the help anyway, it is great to have this chance of sharing experience!
|
Moderator
|
10. December 2005 @ 02:30 |
Link to this message
|
@lieblm -
(ps Nero 7 won't make any difference here i don't think, as your burner is already sufficiently catered for in Nero 6..)
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2278111 (506:14.61, 4449MB)
- 4459MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Recorder: TEAC DV-W516G, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
- that's odd, the drive is saying it's got it's little mitts on an MCC03RG20 disc so the firmware must be happy with recognising the disc...
Quote:
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R DL.)
...however......it now says the disc is unknown...
Quote:
Sense Key: 0x02 (KEY_NOT_READY)
...and it says not ready
Quote:
Illegal disc
...hence this message.....
...hmmm...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 10. December 2005 @ 02:31
|
|
lieblm
Newbie
|
10. December 2005 @ 07:43 |
Link to this message
|
Hi, I give up :)
tried to burn same image on my Verbatim DVD-R and Memorex DVD-RW, the Memorex burning went ok, the Verbatim gave Illegal disk error; here are the parts of the log files that are different:
================ GOOD (Memorex DVD-RW) ================
17:43:46 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TEAC DV-W516G, Media type: DVD-RW
Disc Manufacturer: CMCW02 -
Disc Application Code: 64, Disc Physical Code: 214
================ BAD (Verbatim DVD-R) ================
18:32:11 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TEAC DV-W516G, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
================ GOOD (Memorex DVD-RW) ================
17:43:46 #16 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:43:55 #17 Text 0 File Cdrdrv.cpp, Line 1288
17:43:55.807 - TEAC DV-W516G\H1 T0 : Queue again later
18:07:46 #18 Text 0 File WriterStatus.cpp, Line 116
<TEAC DV-W516G > start writing Lead-Out at LBA 1902160 (1D0650h), lenght 0 blocks
18:07:46 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:07:46 #20 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 1902159
18:07:46 #21 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...
18:07:46 #22 Text 0 File DVDR.cpp, Line 3002
Estimated time for 30mm Borders: 0min 00sec
18:08:26 #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2x (2 770 KB/s)
18:08:26 #24 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
18:17:14 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:17:14 #26 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully
================ BAD (Verbatim DVD-R) ================
18:32:11 #16 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
18:32:15 #17 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A890000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
18:32:15 #18 CDR -1046 File Writer.cpp, Line 311
Illegal disc
18:32:15 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:32:15 #20 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
18:32:15 #21 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
18:32:15 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2 770 KB/s)
My Verbatim media a probably fake :/ will try to buy some better ones
Thanks for help anyway, folks!
|
|
dvdprob
Newbie
|
10. December 2005 @ 08:36 |
Link to this message
|
Im also having problems , actually iv had problems with dvd's since day 1 . so i have Nero 6 ultra edition . i used DVD-R discs and well here is my log file ... i dont know much on dvd drives also , i know it burns cd-r ok tho , sometimes it screws 7 cd's in a row tho , but then i just compress the files and it works ... HELP please
********************************
R*****
V.corp
****-******-*****-*****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <PHILIPS DVD+-RW DVD8631> Version: CD21 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.6
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
PHILIPS DVD+-RW DVD8631 D: CDRom0
AXV CD/DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 253MB (260080kB)
Free physical memory: 98MB (100840kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.12.2005
ISO compilation
10:44:02 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:44:02 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
10:44:02 PM #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVD+-RW DVD8631 running
10:44:02 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
10:44:02 PM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media
10:44:02 PM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2250367 (500:04.67, 4395MB)
10:44:02 PM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
10:44:02 PM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD-R
Disc Manufacturer: MXL RG - 02
Disc Application Code: 64, Disc Physical Code: 193
10:44:02 PM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:44:02 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2250368 (2250368) = #2250368/500:4.68
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2250368 blocks [PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
10:44:02 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4608753664, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2250368 | lead-out | 1 | 0x41 | 0x00
10:44:02 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:44:03 PM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
10:44:03 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:44:03 PM #15 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
10:44:03 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:55:06 PM #17 Text 0 File WriterStatus.cpp, Line 116
<PHILIPS DVD+-RW DVD8631 > start writing Lead-Out at LBA 2250368 (225680h), lenght 0 blocks
10:55:06 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:55:08 PM #19 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 4.9x (6,800 KB/s)
10:55:09 PM #20 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
10:55:11 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:55:11 PM #22 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode
10:55:11 PM #23 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Buffer underrun protection -> ON
10:55:11 PM #24 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes
10:55:11 PM #25 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:10:49 PM #26 Text 0 File WriterStatus.cpp, Line 116
<PHILIPS DVD+-RW DVD8631 > start writing Lead-Out at LBA 2250368 (225680h), lenght 0 blocks
11:10:49 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:10:49 PM #28 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was 2250367
11:11:39 PM #29 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)
11:11:40 PM #30 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
11:11:41 PM #31 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:11:41 PM #32 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode
11:11:41 PM #33 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Buffer underrun protection -> ON
11:11:41 PM #34 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes
11:11:41 PM #35 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:17:10 PM #36 SCSI -1046 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03B30000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x07 0xA2 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x30 0x05
11:17:10 PM #37 CDR -1046 File Writer.cpp, Line 311
Illegal disc
11:17:10 PM #38 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:17:10 PM #39 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:17:10 PM #40 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was 500383
11:17:10 PM #41 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 5:28:09 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 03/08/2004 11:59:44 PM (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 9:33:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
...
|
|
benwages
Newbie
|
10. December 2005 @ 10:09 |
Link to this message
|
|
Im having the same problem. First NeroInfo said there was no system ASPI, I did ASPI update, it said it was corrupted so i used ForceASPI and that seemed to do the trick in that department, but it didnt change the error. Also when i try to update the firmware it says "Target NEC ND-2500A is not found correctly." Please help me. THANK YOU SOO MUCH.
Log file:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10-9-1999 12:06:00
ahead WinASPI: File 'D:\Program Files\nero\Nero 7\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.70 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.70 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514800kB)
Free physical memory: 236MB (242616kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.12.2005
ISO compilation
15:01:03 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15:01:03 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
15:01:03 #3 Text 0 File Reader.cpp, Line 124
Reader running
15:01:03 #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
15:01:03 #5 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
15:01:03 #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2158415 (479:38.65, 4215MB)
15:01:03 #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
15:01:03 #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
15:01:03 #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:01:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2158416 (2158416) = #2158416/479:38.66
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2158416 blocks [E: _NEC DVD_RW ND-2500A]
--------------------------------------------------------------
15:01:03 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: _NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4420435968, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2158416 | lead-out | 1 | 0x41 | 0x00
15:01:03 #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
15:01:03 #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
15:01:04 #14 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
15:01:04 #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
15:01:04 #16 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 2.4x (3.324 KB/s)
15:01:04 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:01:04 #18 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
15:01:04 #19 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
15:01:04 #20 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
15:01:04 #21 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:01:04 #22 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 20 EF 50 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
15:01:04 #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
E: _NEC DVD_RW ND-2500A
15:01:04 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
15:01:04 #25 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2.4x (3.324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10-9-1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11-3-2005 17:28:13 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 10. December 2005 @ 10:29
|
|
Advertisement
|
|
|
Moderator
|
10. December 2005 @ 10:12 |
Link to this message
|
@dvdprob -
Quote:
Nero Version: 6.6.0.6
- too old, update to latest 6.x version, 6.6.0.18 (Update-Package 1) from here - http://www.nero.com/nero6/enu/nero-up.php
Quote:
Recorder: <PHILIPS DVD+-RW DVD8631> Version: CD21
- latest firmware, GD30, is here - http://forum.rpc1.org/dl_firmware.php?download_id=1978
However also read here about horror stories with others with the same burner - http://forums.afterdawn.com/thread_view.cfm/179003
Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
- yup, Nero is too old to recognise your drive, update to latest Nero 6.6.0.18
Quote:
Physical memory : 253MB (260080kB)
Free physical memory: 98MB (100840kB)
Memory in use : 61 %
- 512MB is what i consider the minimum for dvd work. you should get more memory, and for now you're gonna have to dig deep to close down as much as you can to free up more memory
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2250367 (500:04.67, 4395MB)
- 4395MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Illegal disc
- follow ALL suggestions
Quote:
Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 03/08/2004 11:59:44 PM (Adapter driver for rec)
those question marks are saying your ATAPI drivers aren't loaded correctly, try to fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 10. December 2005 @ 10:13
|
|
