|
TUTORIAL: How to FTP...Made EASY!!
|
|
|
shawty
Junior Member
|
12. June 2007 @ 09:19 |
Link to this message
|
ok i really need help, i´ve been trying to FTP my xbox for many hours now, i tried using smartftp and cuteftp as mentiones in the xbmc homepage but i get the sames error again and again,
The remote host actively refused the attempt to connect to it.
1) Please verify that the destination host name or IP address is correct.
2) Verify that the connection port number is correct (under Site Settings | Type tab).
3) The remote server may be temporarily or permanently inaccessible (try again later).
4) Verify that you have chosen the right protocol (SSH2, SSL, FTP, etc.) and have setup all required options for that protocol.
Igot the same thing in smartftp and i have read a thousand forums, guides, etc trying to solve this but they wont do.
My xbox has the samsung reader, evox and is the old dark green model.
I read that i have to change the network settings on my xbox, bt when i try to access it through the ms dashboard, i'm sent back to evox screen, same with xbox live.
I don't have a router, just a simple xbox - pc connection via crossover cable (not ethernet).
Also the network connnection icon on the left right corner of the screen says limited or nule connection, but it can recognize that something is connected (it can only be my xbox as i only have one ehternet port, my modem is installed via usb)
here´s some extra info:
i.p. / host - 169.254.126.16
subnet mask - 255.255.0.0
thin that´s all
hope you can help me
shawty
www.thegtaplace.com go ahead and change your cheap cars for luxurious cars like the 1.5 million Bugatti Veyron!!!
|
|
Advertisement
|
|
|
|
|
shawty
Junior Member
|
13. June 2007 @ 10:09 |
Link to this message
|
problem solved never mind
is there any way to FTP with the xbox in error 16 mode
doubt it
www.thegtaplace.com go ahead and change your cheap cars for luxurious cars like the 1.5 million Bugatti Veyron!!!
|
|
drakehz
Newbie
|
22. June 2007 @ 10:22 |
Link to this message
|
i had flash fxp working on my xbox then all of a sudden next time i turned it on i could not connect to my xbox with Flash fxp and i get the message [R] Connected to 192.168.0.138
[R] 220-
[R] 220----------------------------------------------------------------------------
[R] 220-XBMC:FileZilla version 1.5.6, (based on FileZilla Server 0.8.8)
[R] 220-
[R] 220-http://sourceforge.net/projects/xbmc/
[R] 220----------------------------------------------------------------------------
[R] 220
[R] 421 Login time exceeded. Closing control connection.
It will not work for some reason and there is nothing in FTP user name expect "None" and it will not change and i think that is what is causing it and i know my password for it is xbox so this is my system info maby you guy think somthing is wrong or unchecked
Xbox
-Ip address 192.168.0.138
-Netmask 255.255.255.0
-Default Gateway 192.168.0.1
-Dns Server 192.168.0.1
Computer
-Ip Address 192.168.0.1
-Subnet Mask 255.255.255.0
-Default Gateway 192.168.01
I could really use some help guys on getting this to work
BAM
|
|
axel16
Newbie
|
24. June 2007 @ 12:36 |
Link to this message
|
hey guys, before i state my problem, I'd like to tell my internet connection for reference. It goes Phone Jack -> Modem -> Wireless Router -> My Computer -(Crossover Cable)> My Xbox. I set up all the stuff on my PC correctly, but when the Xbox turns on, it doesn't acquire an IP address. It worked when I just had It connected to my router, I could FTP and everything, but now it's not getting any signal. how do I fix this?
|
Newbie
|
12. July 2007 @ 10:12 |
Link to this message
|
can some one please help !!! i have evolutionx dash board and softmodded xbox a crossover cable connected to my labtop in my room my labtop is wireless and theres a few connection in my house that are local area connection im using a wireless network connection 1 my computa ip is 192.168.1.100 subnet mask 255.255.255.0 defualt gateway 192.168.1.1 my xbox's ip is 192.168.0.3 subnet mask 255.255.255.0 defualtgateway 192.168.0.1 dns are 0.0.0.0 static ip is off some one please i have a router downstairs some one help!
|
|
stryker69
Account closed as per user's own request
|
26. July 2007 @ 09:35 |
Link to this message
|
|
you cant do this without a frikin wireless router, because ive tryed every tut on useing a crossover cable and out off 100 tries it never ever works. thanx for nothing at all and i want my 9 bucks for the crossover cable i bought back ..lol
|
|
theridges
Suspended due to non-functional email address
|
26. July 2007 @ 11:43 |
Link to this message
|
Originally posted by stryker69:
you cant do this without a frikin wireless router, because ive tryed every tut on useing a crossover cable and out off 100 tries it never ever works. thanx for nothing at all and i want my 9 bucks for the crossover cable i bought back ..lol
your stupid...
|
Junior Member
|
29. July 2007 @ 20:07 |
Link to this message
|
I did it, it took me six hours of reading, re-reading, and trying to figure out static IP's, and making a crossover cable before I realized "NOOB=DHCP" 5 minutes is all it took me to reset my Xbox and FTP settings, and move on with the rest of the modding process. Sure it was a pain in my ass to haul my xbox all the way across the house to the router but at least it works. I learned a great deal of information from this thread but the most important advice I can give after reading all this is, if your a noob stick with a router forget the crossover cable. Thanks to everyone for the great information
|
AfterDawn Addict
|
29. July 2007 @ 23:07 |
Link to this message
|
|
If you're a NOOB, just read my tutorial. It's not rocket science...
|
|
urkiller
Suspended due to non-functional email address
|
18. August 2007 @ 21:30 |
Link to this message
|
|
|
AfterDawn Addict
|
18. August 2007 @ 21:53 |
Link to this message
|
|
READ MY TUTORIALS!!!
Seriously...
|
|
ly9bri
Newbie
|
21. September 2007 @ 04:55 |
Link to this message
|
|
i am trying to copy xbox games...i have a modded xbox with blackbolt dashboard....can someone please help
|
Member
|
13. January 2008 @ 20:55 |
Link to this message
|
|
Your links are stuffed up, when I click on the "how to ftp" it akes me to how to re-install windows.
|
|
slvrblt
Junior Member
|
14. January 2008 @ 15:27 |
Link to this message
|
I have recently modded an xbox with evox dash version 3935. I am having trouble ftping to the xbox even after following the tutorial on this site and several others. I believe I have followed the instructions correctly, but of course there could be a mistake as I am new to all this. My setup is as follows: I connect my xbox through a Linksys WRT54g router. I have a Marvell Yukon Ethernet Adapter connected to the router as well. I also have a wildblue satellite modem connected for internet connection. I have tested the cables to ensure that they work and verified that it is a straight through cable rather than the crossover. The settings for my PC are:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
XBox Settings
IP: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
My computer and the xbox are currently set to a static ip. I have tried DHCP settings as well with no luck. At this point I've probably been looking at this too long to notice if there were an obvious problem...lol. I have used FlashFXP and SmartFTP clients and received the same errors.
WinSock 2.0 -- OpenSSL 0.9.8b 04 May 2006
[R] Connecting to 192.168.1.101 -> IP=192.168.1.101 PORT=21
[R] Connected to 192.168.1.101
[R] 220 Please enter your login name now.
[R] USER xbox
[R] 331 Password required for xbox.
[R] PASS (hidden)
[R] 230 User xbox logged in , proceed.
[R] SYST
[R] 215 UNIX Type: L8
[R] REST 100
[R] 502 rest is not implemented.
[R] This site may not allow file resuming
[R] PWD
[R] 257 "/" is current directory
[R] TYPE A
[R] 200 Type set to ASCII.
[R] Listening on PORT: 3264, Waiting for connection.
[R] PORT 192,168,1,100,12,192
[R] 425 Can't open data connection to 192.168.1.100:35091
[R] List Error
[R] Listening on PORT: 3266, Waiting for connection.
[R] PORT 192,168,1,100,12,194
[R] 425 Can't open data connection to 192.168.1.100:35347
[R] List Error
[R] PORT mode failed, trying PASV mode.
[R] PASV
[R] 502 pasv is not implemented.
[R] Listening on PORT: 3268, Waiting for connection.
[R] PORT 192,168,1,100,12,196
[R] 425 Can't open data connection to 192.168.1.100:35603
[R] List Error
I have tried disabling and enabling PASV to no avail. My network sees the router, internet connection, my computer, and the xbox. All appear online and everything but the FTP to the xbox functions normally. Any help you could provide is appreciated. I have attempted to provide as many details as possible, but if you require anything further please let me know. Thanks...
This message has been edited since posting. Last time this message was edited on 14. January 2008 @ 15:38
|
|
slvrblt
Junior Member
|
15. January 2008 @ 17:22 |
Link to this message
|
|
Please disregard the above. This issue has now been resolved. Thanks!
|
Member
|
29. January 2008 @ 00:07 |
Link to this message
|
|
Where is the tutorial ?
|
|
Advertisement
|
|
|
|
buggu
Junior Member
|
31. January 2008 @ 12:50 |
Link to this message
|
|
Hi
I have my xbox networked and can access my shared folder on pc. was wondering how do i go about allocating individual shared folder to pictures, videos and music on xbmc. Its just when i select work group all the folders come up,i want to specify what folders should come up if thats possible.
Ps also how to i change the name work group and delete/hide some of the other workgroups which are shown and i dont really need.
|
