|
|
|
SATA drive ????
|
|
Member
|
4. December 2005 @ 14:08 |
Link to this message
|
|
hi everyone.. i need some help to set up my sata drive jumper...
i have P4. 3.0Ghz. 1.5GB of ram. and a 80Gb (western Digital) SATA drive. i want to add another EIDE as the second (slave) drive. but when i set the second drive as slave and plug it in the first EIDE slot. The os window doesnot load. I don't know how to set the jumper on the Sata drive.cause it so differ from the EIDE drive. Can any1 show me how to set the jumper on the SATA drive..
Thanx in advance....
|
|
Advertisement
|
 |
|
|
Senior Member
|
4. December 2005 @ 14:56 |
Link to this message
|
|
I didn't think you needed jumpers for SATA because the interface is its own channel, every one is master. Are you saying you want one SATA hard drive and one regular parallel connection (like your burners have)?
|
|
ddp
Moderator
|
4. December 2005 @ 17:32 |
Link to this message
|
|
did you configure your bios bootdrive sequence to sata than ide?
|
Member
|
4. December 2005 @ 17:39 |
Link to this message
|
|
no, i mean i had a WD 80gb SATA hard drive in the comp already. but when i add my EIDE hard drive as the slave drive and the os doesnot load. and i don't know why, do i have to set the jumper for the SATA drive too ?. thanx
|
Member
|
4. December 2005 @ 17:41 |
Link to this message
|
|
ok will try that ddp. thanx
|
|
SypherTek
Suspended due to non-functional email address
|
5. December 2005 @ 00:08 |
Link to this message
|
|
You should set the EIDE drive to be master not slave (unless your making it slave to another IDE drive)as there is no slave to a SATA drive. also set the boot sequence to boot from SATA rather than IDE.
Studio Comp: AMD Athlon XP 3200+ OC ~ 2.35GHz runs at 40 celcius idle and 48 under stress (aerocool GT1000 really works!), Asrock K7VT4A , 1024MB Dual Channel DDR 400, MSI Nvidia FX5200 128MB OC ~ 600MHz mem 350MHz core,80GB SATA + 200GB SATA + 120GB IDE, 7.1 Channel Soundblaster Audigy 2 Platinum EX sound and midi interface. 19" Sony SDM-HS95 TFT monitor - sweeet
Comp2: AMD Sempron 2400+ OC ~ 2.0GHz (Stable), Asrock K7S41GX, 512MB DDR 333, Onboard Graphics, 40GB Maxtor IDE
set of monitors on the way soon :P
Google is your friend...
WorkComp: LAPTOP, intel celeron D 2.4GHz, 256MB DDR, 20GB hd. NO SCREEN IT WAS SAWN OFF :S (bag of crap) |
Member
|
5. December 2005 @ 04:32 |
Link to this message
|
|
yes i did put the EIDE drive as Master and How come i can't get into the setup page. i did press F2, it didnot response, but the F11 response it only show the boot sequence, but i can't change it permantly.i can only tell it to boot from Sata drive, yes it does boot up ok though but when i restart it, it still doesnot boot on its own. my Mobo is P4V88 asrock. THE problem is i can't get into the setup page to setup it permantly. any solution??. thanx
This message has been edited since posting. Last time this message was edited on 5. December 2005 @ 04:37
|
|
SypherTek
Suspended due to non-functional email address
|
5. December 2005 @ 04:57 |
Link to this message
|
|
well the first possibility is that the F2 key on your keyboard doesnt work so try another kb.
also try and see if you can access the setup page when the drives arent plugged in as there could be a compatibility issue
hope this helps :P
Studio Comp: AMD Athlon XP 3200+ OC ~ 2.35GHz runs at 40 celcius idle and 48 under stress (aerocool GT1000 really works!), Asrock K7VT4A , 1024MB Dual Channel DDR 400, MSI Nvidia FX5200 128MB OC ~ 600MHz mem 350MHz core,80GB SATA + 200GB SATA + 120GB IDE, 7.1 Channel Soundblaster Audigy 2 Platinum EX sound and midi interface. 19" Sony SDM-HS95 TFT monitor - sweeet
Comp2: AMD Sempron 2400+ OC ~ 2.0GHz (Stable), Asrock K7S41GX, 512MB DDR 333, Onboard Graphics, 40GB Maxtor IDE
set of monitors on the way soon :P
Google is your friend...
WorkComp: LAPTOP, intel celeron D 2.4GHz, 256MB DDR, 20GB hd. NO SCREEN IT WAS SAWN OFF :S (bag of crap) |
Member
|
5. December 2005 @ 05:04 |
Link to this message
|
|
thanx for the quick response
do u mean the sata hdrive?
i think it not the kboard but i will change it anyway
This message has been edited since posting. Last time this message was edited on 5. December 2005 @ 05:05
|
|
SypherTek
Suspended due to non-functional email address
|
5. December 2005 @ 05:11 |
Link to this message
|
|
Try without any drives at all and if it works keep adding drives one by one until it stops working
(id reply even quicker if this forum allowed me to post more than evry 3 mins lol i really need member stat)
hope that helps
Studio Comp: AMD Athlon XP 3200+ OC ~ 2.35GHz runs at 40 celcius idle and 48 under stress (aerocool GT1000 really works!), Asrock K7VT4A , 1024MB Dual Channel DDR 400, MSI Nvidia FX5200 128MB OC ~ 600MHz mem 350MHz core,80GB SATA + 200GB SATA + 120GB IDE, 7.1 Channel Soundblaster Audigy 2 Platinum EX sound and midi interface. 19" Sony SDM-HS95 TFT monitor - sweeet
Comp2: AMD Sempron 2400+ OC ~ 2.0GHz (Stable), Asrock K7S41GX, 512MB DDR 333, Onboard Graphics, 40GB Maxtor IDE
set of monitors on the way soon :P
Google is your friend...
WorkComp: LAPTOP, intel celeron D 2.4GHz, 256MB DDR, 20GB hd. NO SCREEN IT WAS SAWN OFF :S (bag of crap) |
Member
|
5. December 2005 @ 05:35 |
Link to this message
|
|
thanx so much syphertek it the dammmm k-board that gave me the problem. i got it all fix. thanx again..o yeah and one more question. u know the raid tool. does the program come with the mobo, or elsewhere...
|
|
SypherTek
Suspended due to non-functional email address
|
5. December 2005 @ 07:25 |
Link to this message
|
|
usually the raid prog will come with your mobo. if it didnt you should be able to get it from the manufacteurer website (usually)
glad i could help
Studio Comp: AMD Athlon XP 3200+ OC ~ 2.35GHz runs at 40 celcius idle and 48 under stress (aerocool GT1000 really works!), Asrock K7VT4A , 1024MB Dual Channel DDR 400, MSI Nvidia FX5200 128MB OC ~ 600MHz mem 350MHz core,80GB SATA + 200GB SATA + 120GB IDE, 7.1 Channel Soundblaster Audigy 2 Platinum EX sound and midi interface. 19" Sony SDM-HS95 TFT monitor - sweeet
Comp2: AMD Sempron 2400+ OC ~ 2.0GHz (Stable), Asrock K7S41GX, 512MB DDR 333, Onboard Graphics, 40GB Maxtor IDE
set of monitors on the way soon :P
Google is your friend...
WorkComp: LAPTOP, intel celeron D 2.4GHz, 256MB DDR, 20GB hd. NO SCREEN IT WAS SAWN OFF :S (bag of crap) |
Member
|
5. December 2005 @ 09:09 |
Link to this message
|
|
ok then i will try to play around with my raid function..
thanx...you help alot..
This message has been edited since posting. Last time this message was edited on 5. December 2005 @ 09:10
|
|
Advertisement
|
|
|
|
SypherTek
Suspended due to non-functional email address
|
6. December 2005 @ 00:58 |
Link to this message
|
|
no trouble :P
Glad i could help
Studio Comp: AMD Athlon XP 3200+ OC ~ 2.35GHz runs at 40 celcius idle and 48 under stress (aerocool GT1000 really works!), Asrock K7VT4A , 1024MB Dual Channel DDR 400, MSI Nvidia FX5200 128MB OC ~ 600MHz mem 350MHz core,80GB SATA + 200GB SATA + 120GB IDE, 7.1 Channel Soundblaster Audigy 2 Platinum EX sound and midi interface. 19" Sony SDM-HS95 TFT monitor - sweeet
Comp2: AMD Sempron 2400+ OC ~ 2.0GHz (Stable), Asrock K7S41GX, 512MB DDR 333, Onboard Graphics, 40GB Maxtor IDE
set of monitors on the way soon :P
Google is your friend...
WorkComp: LAPTOP, intel celeron D 2.4GHz, 256MB DDR, 20GB hd. NO SCREEN IT WAS SAWN OFF :S (bag of crap) |
|
