HP DVD640 Burning Problem

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Tuesday 30.9.2025 / 11:01

Search AfterDawn Forums:

afterdawn.com > forums > dvd±r discussion > dvd±r for advanced users > hp dvd640 burning problem

Browse by topic

Forums

Start a new thread

HP DVD640 Burning Problem

Jump to:

Posted

Message

jsen

Newbie

21. December 2005 @ 18:58

Link to this message

Below, I posted my NeroHistory log. I've been using 1ClickDVDCopy for a while now. All of a sudden, one day, it stopped reading my source destination > my DVD Writer. I tried uninstalling, reinstalling, upgrading firmware for writer and downgrading. Nothing seems to work. I switched to Nero for my burning. It worked fine for a while. Now, again, after about a minute, it encounters an error. I successfully burned a DVD last night after reducing my burning speed to 4x. After that session, I tried to burn another. It failed at 4x after about a minute. I tried reducing it to 2x. It failed at that speed as well.

I though perhaps there was a new windows security update that might be conflicting with burning DVD movies. It turns out, that's not the case. Any help would be hot.

Here is a successful log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
(Nero Express)
Recorder: <HP DVD Writer 640c> Version: JS04 - HA 1 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HP DVD Writer 640c >Version: JS04 - HA 1 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-00DGA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 640c atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDD4801 CD-R/RW atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HP DVD Writer 640c F: CDRom0
PHILIPS CDD4801 CD-R/RW E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572340kB)
Free physical memory: 868MB (889108kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.12.2005
UDF/ISO compilation
12:25:39 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

12:25:39 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

12:25:39 PM #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

12:25:39 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

12:25:39 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

12:25:39 PM #6 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 640c running

12:25:39 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

12:25:39 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

12:25:39 PM #9 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

12:25:39 PM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1249487 (277:39.62, 2440MB)

12:25:39 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD DVD)

12:25:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: HP DVD Writer 640c, Media type: DVD+R

12:25:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:25:39 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1249488 (1249488) = #1249488/277:39.63
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1249488 blocks [HP DVD Writer 640c]
--------------------------------------------------------------

12:25:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HP DVD Writer 640c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2558951424, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1249488 | lead-out | 1 | 0x41 | 0x00

12:25:39 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:25:39 PM #17 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

12:25:39 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:25:39 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

12:25:39 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:25:39 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07A30600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

12:25:39 PM #22 Text 0 File DVDR.cpp, Line 5762
Drive: HP DVD Writer 640c
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

12:25:39 PM #23 CDR -1207 File DVDR.cpp, Line 4938
Book Type automatically set to: DVD-ROM

12:25:39 PM #24 Text 0 File DVDPlusRW.cpp, Line 655
Start write address at LBA 0
DVD high compatibility mode: Yes

12:30:09 PM #25 Text 0 File WriterStatus.cpp, Line 116
<HP DVD Writer 640c > start writing Lead-Out at LBA 1249488 (1310D0h), lenght 0 blocks

12:30:09 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:31:01 PM #27 Text 0 File DVDR.cpp, Line 5762
Drive: HP DVD Writer 640c
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

12:31:01 PM #28 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

Here are a couple failed logs:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <HP DVD Writer 640c> Version: JS04 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HP DVD Writer 640c >Version: JS04 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-00DGA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 640c atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDD4801 CD-R/RW atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HP DVD Writer 640c F: CDRom0
PHILIPS CDD4801 CD-R/RW E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572340kB)
Free physical memory: 1050MB (1075288kB)
Memory in use : 31
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.12.2005
UDF/ISO compilation
11:36:30 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

11:36:30 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

11:36:30 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

11:36:30 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

11:36:30 AM #5 Text 0 File Reader.cpp, Line 127
Reader running

11:36:30 AM #6 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 640c running

11:36:30 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:36:30 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:36:31 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:36:31 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1660383 (368:58.33, 3242MB)

11:36:31 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)

11:36:31 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 640c, Media type: DVD+R

11:36:31 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:36:31 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1660384 (1660384) = #1660384/368:58.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1660384 blocks [HP DVD Writer 640c]
--------------------------------------------------------------

11:36:31 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 640c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3400466432, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1660384 | lead-out | 1 | 0x41 | 0x00

11:36:31 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:36:31 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

11:36:31 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:36:31 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

11:36:31 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:36:31 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04DE0400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

11:36:31 AM #22 Text 0 File DVDR.cpp, Line 6168
Drive: HP DVD Writer 640c
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

11:36:31 AM #23 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM

11:36:31 AM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

11:36:45 AM #25 SCSI -1176 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04320000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x01

11:36:45 AM #26 CDR -1176 File Writer.cpp, Line 311
Session fixation error

11:36:45 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:36:45 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:36:45 AM #29 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03

11:36:45 AM #30 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

11:36:45 AM #31 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

11:36:45 AM #32 Text 0 File DVDR.cpp, Line 6168
Drive: HP DVD Writer 640c
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

11:36:45 AM #33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <HP DVD Writer 640c> Version: JS04 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HP DVD Writer 640c >Version: JS04 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-00DGA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 640c atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDD4801 CD-R/RW atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HP DVD Writer 640c F: CDRom0
PHILIPS CDD4801 CD-R/RW E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572340kB)
Free physical memory: 1046MB (1072080kB)
Memory in use : 31
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.12.2005
UDF/ISO compilation
11:35:24 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

11:35:24 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

11:35:24 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

11:35:24 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

11:35:24 AM #5 Text 0 File Reader.cpp, Line 127
Reader running

11:35:24 AM #6 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 640c running

11:35:24 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:35:24 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:35:24 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:35:24 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1660383 (368:58.33, 3242MB)

11:35:24 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)

11:35:24 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 640c, Media type: DVD+R

11:35:24 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:35:24 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1660384 (1660384) = #1660384/368:58.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1660384 blocks [HP DVD Writer 640c]
--------------------------------------------------------------

11:35:24 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 640c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3400466432, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1660384 | lead-out | 1 | 0x41 | 0x00

11:35:24 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:35:24 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

11:35:24 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:35:24 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

11:35:25 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:35:25 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04DF0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

11:35:25 AM #22 Text 0 File DVDR.cpp, Line 6168
Drive: HP DVD Writer 640c
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

11:35:25 AM #23 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM

11:35:25 AM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

11:35:35 AM #25 SCSI -1176 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04300000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x01

11:35:35 AM #26 CDR -1176 File Writer.cpp, Line 311
Session fixation error

11:35:35 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:35:35 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:35:35 AM #29 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03

11:35:35 AM #30 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

11:35:35 AM #31 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

11:35:35 AM #32 Text 0 File DVDR.cpp, Line 6168
Drive: HP DVD Writer 640c
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

11:35:35 AM #33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)

[ + quote]

inspiration without action is failure in action --Jsen

9mmruger1

AfterDawn Addict

22. December 2005 @ 09:58

Link to this message

Quote:
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)

What kind of media are you using? The failed logs (both) don't seem to like the media.

[ + quote]

For great guides:
http://home.comcast.net/~bbmayo/index.html

jsen

Newbie

22. December 2005 @ 15:24

Link to this message

Media files I'm trying to burn are DVD movie files, the same kind I've burned in the past. I'm using DivXtoDVD to convert .AVI files to .VOB then burn to dvd disc. I've been using Memorex DVD+R discs.

[ + quote]

inspiration without action is failure in action --Jsen

9mmruger1

AfterDawn Addict

22. December 2005 @ 16:26

Link to this message

Quote:
I've been using Memorex DVD+R discs.

This is one of the worst medias that you can use. Very poor quality control and if you visit the media forum at this site you can see the woefull scan results that have been posted there.

Do yourself a favor and get some Verbatim, Taiyo Yuden, Maxells. Even Office Depot Branded DVD+R 8x are better than memosux...er memorex.

The rest of the log that I saw looks very reasonable.

[ + quote]

For great guides:
http://home.comcast.net/~bbmayo/index.html

jsen

Newbie

22. December 2005 @ 20:46

Link to this message

I was looking over all my old DVD's that I burned. It seems that the only difference between them is the old ones (most that worked) were 16x and the ones I got this time (by accident) were 8x. Do you suppose that might have something to do with it?

[ + quote]

inspiration without action is failure in action --Jsen

creaky

Moderator

24. December 2005 @ 00:08

Link to this message

First of re Memorex media (ugh!), see here for reasons not to use them - http://forums.afterdawn.com/thread_view.cfm/232406

Quote:
Nero Version: 6.6.0.18

- latest 6.x version

Quote:
Recorder: <HP DVD Writer 640c> Version: JS04

- firmware is up to date, however see my next comment

Quote:
Recorder: HP DVD Writer 640c, Media type: DVD+R

- the burner can't recognise that disc properly, here's an example (not the best example as it's foul CMC media but it's an example) of what it should look like, ie when the firmware's up to date you see a 3line paragraph like this -

Quote:
Recorder: DVDRW IDE1004, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Session fixation error

- follow ALL suggestions

Quote:
Burn process failed at 2.4x (3,324 KB/s)

- no need to burn so slow, 4x is an acceptable minimum speed

[ + quote]

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

saugmon

AfterDawn Addict

25. December 2005 @ 17:40

Link to this message

Here's the website for the latest update for that HP640c that I know of:

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?dlc=en&l...

I just hooked mine back up so I can use it as a reader and the light scribe feature.I also updated it to the CS30 firmware just an hour or so ago.

The poor compatability on my stand alones and too many read errors are the reason I pulled out this drive after a dozen burns.

[ + quote]

HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!

jsen

Newbie

25. December 2005 @ 21:29

Link to this message

It turns out that the DVD+R discs were the problem. It's strange, however, that I've used about 100 of them before with little problem at all. After switching to a new brand, burning has resumed. Thanks for the help.

[ + quote]

inspiration without action is failure in action --Jsen

saugmon

AfterDawn Addict

26. December 2005 @ 00:37

Link to this message

I screwed up my last post. JS04 is the latest fw update.Mine was CS30 and updated to JS04.

Hold onto those memosux 16x. Maybe HP will have a future firmware update to include those.

[ + quote]

Start a new thread

afterdawn.com > forums > dvd±r discussion > dvd±r for advanced users > hp dvd640 burning problem


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.