|
|
|
Error Reading Data
|
|
Junior Member
|
10. June 2006 @ 17:13 |
Link to this message
|
|
So today I've been trying to back up some of my older movies. I've been backing up movies for a while now without any real issues, but for some reason today I've been having issues with every movie, it will back up fine (using DVD Shrink 3.2), then when it goes to burn on Nero, I get an error at 0% saying error reading data. I was thinking perhaps my burner was crapping out, so I plugged in my brother's external burner to try that, and again ran into the same issue. I also tried to backup a movie, then after getting the nero error tried to open the files in dvd shrink3.2 and got an error that it couldn't open the folder. I uninstalled and re-installed both nero and DVD Shrink. Any ideas? Below is a copy of the error report from my last attempt, using my brother's external burner. Any ideas/suggestions would be awesome!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.20
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 2 TA 0 - 6.3.1.20
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : HTS541080G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC DV-W28EAT atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TEAC DV-W28EAT D: CDRom0
_NEC DVD_RW ND-3520A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 446MB (456944kB)
Free physical memory: 99MB (101716kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.6.2006
NeroAPI
8:56:15 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
8:56:15 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
8:56:15 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
8:56:16 PM #4 Text 0 File Reader.cpp, Line 126
Reader running
8:56:16 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
8:56:16 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:56:16 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:56:17 PM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
8:56:52 PM #9 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
8:56:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
8:56:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD+R
8:56:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
8:56:52 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-3520A ]
--------------------------------------------------------------
8:56:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-3520A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
8:56:52 PM #15 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
8:56:52 PM #16 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
8:56:52 PM #17 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
8:56:52 PM #18 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 8x (11,080 KB/s)
8:56:53 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:56:53 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x075E6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
8:56:53 PM #21 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
8:57:11 PM #22 TRANSFER -25 File Reader.cpp, Line 379
Error reading data
8:57:11 PM #23 Text 0 File ThreadedTransfer.cpp, Line 235
conversion failed, stopping writers
8:57:12 PM #24 Phase 127 File APIProgress.cpp, Line 273
Generating DVD high compatibility borders
8:57:12 PM #25 Phase 129 File APIProgress.cpp, Line 273
Generating DVD borders completed successfully
8:57:12 PM #26 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 8x (11,080 KB/s)
8:57:12 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
8:57:12 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.50 , size=24960 bytes, created 9/7/2005 2:32:58 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 12:19:28 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 10. June 2006 @ 17:24
|
|
Advertisement
|
|
|
|
|
h2ouup2
Junior Member
|
10. June 2006 @ 17:21 |
Link to this message
|
|
Remove your serial number: 1A23-0009-xxxx-xxxx-xxxx-xxxx
Before someone pirates it.
Light is the only thing darkness cannot hide.
|
Junior Member
|
10. June 2006 @ 17:25 |
Link to this message
|
|
Thanks I didn't notice that was included.
|
|
h2ouup2
Junior Member
|
10. June 2006 @ 17:45 |
Link to this message
|
|
Do you have a different cable you could try with your Burner?
Light is the only thing darkness cannot hide.
|
Junior Member
|
10. June 2006 @ 17:46 |
Link to this message
|
|
I don't. The first burner I tried is my own which is an internal burner, which I should have mentioned.
|
Moderator
|
10. June 2006 @ 17:46 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 10. June 2006 @ 17:46
|
Junior Member
|
10. June 2006 @ 17:55 |
Link to this message
|
|
Hey thanks for the suggestions binkie. I'm downloading all those updates now. To answer your question, I was first using a very cheap brand named Playo which I suspected might be the problem so I am now trying Imation which I have not had a problem with before, and that also has had the same issues.
|
Moderator
|
10. June 2006 @ 18:13 |
Link to this message
|
|
Well kregmo73 I won't use either of those :) They may be part of the problem. Better to use would be Verbatim or made in Japan Sony, Fuji or Maxell. After the firmware update try an id those Imation - they don't always use the best manufacturers. In Nero go to ToolKit>Info Tool>disc tab - the manufacturer should be listed.
The internal drive you tried may also need a firmware update. Looks like the TEAC from this log is a CD/DVD Rom drive.
You can check the same site from the link above with the make & model of the other drive and see if there is newer update.
Almost forgot this: Physical memory : 446MB
Free physical memory: 99MB
Keep as much memory free as possible. No mulit tasking and shit down any unncessary processes.
I'd also do a system defrag and disc clean up too.
Keep us posted!
editted to add: Has anything changed since you were last able to burn?
This message has been edited since posting. Last time this message was edited on 10. June 2006 @ 18:14
|
Junior Member
|
10. June 2006 @ 18:16 |
Link to this message
|
|
Thanks for the info again Binkie. I'm elated with how helpful you have been so far. I'll work on getting those updates in. Im curious how I would find a firmware update for my internal drive. If i install that firmware update you suggested for the external drive, that won't effect my internal drive in any way will it?
|
Junior Member
|
10. June 2006 @ 18:19 |
Link to this message
|
|
The type of internal drive that I have is TEAC DV-W28EAT, BTW
|
Junior Member
|
10. June 2006 @ 18:27 |
Link to this message
|
So I was just installing the second update for Nero that you gave me and got an error. Here's the log.
Extracting Common Files\DSFilters\NeSceneDetector.ax
Extracting Common Files\DSFilters\NeSplitter.ax
Extracting Common Files\DSFilters\NeVcd.ax
Extracting Common Files\DSFilters\NeVCR.ax
Extracting Common Files\DSFilters\NeVideo.ax
Extracting Common Files\DSFilters\NeVideoAnalyzer.ax
Extracting NeroVision\MenuTemplates\MTDefault.bin
Extracting NeroVision\w2k\NeVideoFX.bitmaps
Extracting NeroVision\w9x\NeVideoFX.bitmaps
Extracting Nero ShowTime\default.bmp
Extracting Nero ShowTime\Skins\metal.bmp
Extracting NeroVision\NeroFiles\CDI\CDI_VCD.CFG
Extracting NeroVision\NeroFiles\CDROM.CFG
Extracting Setupx.cfg
Extracting CoverDesigner\NeroCoverDesigner_deu.chm
Extracting CoverDesigner\NeroCoverDesigner_eng.chm
Extracting CoverDesigner\NeroCoverDesigner_fra.chm
Extracting CoverDesigner\NeroCoverDesigner_jpn.chm
Extracting Nero MediaHome\NeroMediaHome_Deu.chm
Extracting Nero MediaHome\NeroMediaHome_Eng.chm
Extracting Nero MediaHome\NeroMediaHome_Fra.chm
Extracting Nero MediaHome\NeroMediaHome_Jpn.chm
Extracting Nero PhotoSnap\NeroPhotoSnap_deu.chm
Extracting Nero PhotoSnap\NeroPhotoSnap_Eng.chm
Extracting Nero PhotoSnap\NeroPhotoSnap_fra.chm
Extracting Nero PhotoSnap\NeroPhotoSnap_jpn.chm
Extracting Nero Recode\NeroRecode_deu.chm
Extracting Nero Recode\NeroRecode_eng.chm
Extracting Nero Recode\NeroRecode_fra.chm
Extracting Nero Recode\NeroRecode_jpn.chm
Extracting Nero ShowTime\NeroShowTime_deu.chm
Extracting Nero ShowTime\NeroShowTime_eng.chm
Extracting Nero ShowTime\NeroShowTime_Fra.chm
Extracting Nero ShowTime\NeroShowTime_Jpn.chm
Extracting NeroVision\NeroVisionExpress_DEU.chm
Extracting NeroVision\NeroVisionExpress_ENG.chm
Extracting NeroVision\NeroVisionExpress_FRA.chm
Extracting NeroVision\NeroVisionExpress_JPN.chm
Extracting CoverDesigner\def.dat
Extracting CoverDesigner\stocks.dat
Extracting Common Files\AudioPlugins\aacenc32.dll
Extracting Common Files\DSFilters\aacplus.dll
Extracting Common Files\Lib\AdvrCntr.dll
Extracting NeroVision\w2k\AMCDocBase.dll
Extracting NeroVision\w9x\AMCDocBase.dll
Extracting NeroVision\w2k\AMCDOM.dll
Extracting NeroVision\w9x\AMCDOM.dll
Extracting NeroVision\w2k\AMCLib.dll
Extracting NeroVision\w9x\AMCLib.dll
Extracting NeroVision\w2k\AMCUIBase.dll
Extracting NeroVision\w9x\AMCUIBase.dll
Extracting Common Files\Lib\apreg.dll
Extracting Nero PhotoSnap\BasicFilters.dll
Extracting NeroVision\NeroFiles\cdr100.dll
Extracting NeroVision\NeroFiles\cdr50s.dll
Extracting NeroVision\NeroFiles\CDROM.dll
Extracting NeroVision\NeroFiles\cdu920.dll
Extracting NeroVision\NeroFiles\cr2200cs.dll
Extracting Common Files\Lib\DriveLocker.dll
Extracting Nero ShowTime\DriveSpeed.dll
Extracting NeroVision\w2k\DVDBlockAcc.dll
Extracting NeroVision\w9x\DVDBlockAcc.dll
Extracting Common Files\DSFilters\dvddisc.dll
Extracting Nero Recode\dvddisc.dll
Extracting NeroVision\w2k\DVDDoc.DLL
Extracting NeroVision\w9x\DVDDoc.DLL
Extracting NeroVision\w2k\DVDEngine.dll
Extracting NeroVision\w9x\DVDEngine.dll
Extracting NeroVision\NeroFiles\DVDREALLOC.dll
Extracting NeroVision\w2k\DVDUI.DLL
Extracting NeroVision\w9x\DVDUI.DLL
Extracting NeroVision\NeroFiles\Dws114x.dll
Read error
|
Moderator
|
10. June 2006 @ 18:35 |
Link to this message
|
|
Oh no not another read error.
Okay so I guess the 1st download was ok?
For the 2nd one - delete it and re download. Try again. Did you already have Recode and Vision previously?
For the TEAC - I can't find diddly on this drive or anything worthwhile.
To do the firmware update on the external make sure it's connected 1st.
It shouldn't effect your internal. Make sure no discs are in the drive you are updating and power is on. No other programs running. Only takes a few minutes.
|
Junior Member
|
10. June 2006 @ 19:20 |
Link to this message
|
|
Ok so I deleted and re-downloaded the 2nd update, another read error :( Another update - I plugged in my friend's external burner to see if by some coincidence both my drive and my brother's external drive were crapping out, and no luck there either. I also then tried my brother's external drive on my friend's laptop and it worked flawlessly. This leads me to be pretty confident it's a problem on my computer.
|
Moderator
|
10. June 2006 @ 19:39 |
Link to this message
|
Yep kregmo73 it's looking like your pc.
So what's changed on your pc?
Try these to clean things up a bit:
°System defrag
°Disc cleanup
°Virus scan
°Spyware scan like Spysweeper
°Registry cleaner (free one: http://www.ccleaner.com/)
|
Junior Member
|
10. June 2006 @ 19:44 |
Link to this message
|
|
Sounds good, I'll run all those tonight and see what happens. It definitely seems like the error is happening during the backing up or copying the files onto the laptop rather than the actual burn. Thanks for your help, I'll check in later once all those scans are done.
|
Moderator
|
10. June 2006 @ 19:51 |
Link to this message
|
|
No problemo :)
Yes it sounds like something ain't right on the pc/lappy.
Esp. if you get a read error during an install.
Hopefully we can get this sorted out.
|
Junior Member
|
11. June 2006 @ 08:19 |
Link to this message
|
So I did all of your suggestions last night, and this morning I succesfully installed the 2nd Nero update. So now I tried burning once again, unsuccessfully. Yikes! Here's the error report:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <TEAC DV-W28EAT> Version: 7.3B - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 1419kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HTS541080G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC DV-W28EAT atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TEAC DV-W28EAT D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 446MB (456944kB)
Free physical memory: 76MB (78628kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.6.2006
NeroAPI
12:13:03 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
12:13:03 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
12:13:03 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
12:13:03 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
12:13:03 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:13:03 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:13:03 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:13:03 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:14:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
12:14:25 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
12:14:25 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TEAC DV-W28EAT, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3
12:14:25 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R DL.)
12:14:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [TEAC DV-W28EAT]
--------------------------------------------------------------
12:14:25 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TEAC DV-W28EAT] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
12:14:25 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
12:14:26 PM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:14:26 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
12:14:26 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
12:14:26 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:14:26 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R04
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:14:26 PM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
12:15:28 PM #22 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
12:15:28 PM #23 Text 0 File Reader.cpp, Line 385
Exception value: -1
12:15:28 PM #24 Text 0 File ThreadedTransfer.cpp, Line 234
conversion failed, stopping writers
12:15:29 PM #25 SCSI -1023 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
12:15:29 PM #26 SCSI -1023 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
12:15:29 PM #27 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
12:15:29 PM #28 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
12:15:29 PM #29 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
12:15:29 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
12:15:29 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 12:19:28 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Junior Member
|
11. June 2006 @ 09:59 |
Link to this message
|
I just decided to give the external burner another try now that the firmware was updated, and it started burning properly this time but then failed at 8% Now I'm absolutely baffled!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD_RW ND-3520AW> Version: 3.07 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : HTS541080G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC DV-W28EAT atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TEAC DV-W28EAT D: CDRom0
_NEC DVD_RW ND-3520AW E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 446MB (456944kB)
Free physical memory: 103MB (106080kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.6.2006
NeroAPI
1:50:45 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
1:50:45 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
1:50:45 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
1:50:45 PM #4 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
1:50:45 PM #5 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
1:50:45 PM #6 Text 0 File Reader.cpp, Line 127
Reader running
1:50:45 PM #7 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3520AW running
1:50:45 PM #8 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
1:50:45 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:50:47 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:50:47 PM #11 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
1:51:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2036607 (452:34.57, 3977MB)
1:51:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
1:51:20 PM #14 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-3520AW, Media type: DVD+R
1:51:20 PM #15 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
1:51:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2036608 (2036608) = #2036608/452:34.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2036608 blocks [_NEC DVD_RW ND-3520AW]
--------------------------------------------------------------
1:51:20 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-3520AW] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4170973184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2036608 | lead-out | 1 | 0x41 | 0x00
1:51:21 PM #18 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
1:51:21 PM #19 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
1:51:21 PM #20 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
1:51:21 PM #21 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
1:51:21 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:51:21 PM #23 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09D00600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
1:51:21 PM #24 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x083E7200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:51:21 PM #25 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x083E7200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:51:21 PM #26 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
1:53:28 PM #27 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
1:53:28 PM #28 Text 0 File Reader.cpp, Line 385
Exception value: -1
1:53:29 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:54:28 PM #30 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
1:54:28 PM #31 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
1:54:28 PM #32 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x083E7200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:54:28 PM #33 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x083E7200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:54:28 PM #34 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
1:54:28 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
1:54:28 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
1:54:32 PM #37 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
1:54:32 PM #38 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 12:19:28 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
11. June 2006 @ 10:38 |
Link to this message
|
Hi kregmo73
Still need to free up some memory - no multi tasking and shut down unnecessary processes - even disconnect from internet and shut down anti virus etc.
Now the media - MBI - Moser Baer - not good either. Slow that burn speed down to 4x max on these.
Better still pick up better media.
The last log is showing more media related errors: SCSI_TASTATUS_CHKCOND quite a few of these.
I would also try burning w/ DVD Decrypter instead of Nero w/ Shrink.
Has anything changed since you were last able to burn?
|
Junior Member
|
11. June 2006 @ 10:43 |
Link to this message
|
During the last burn I wasn't doing anything on my computer besides burning, so I'm surprised at how much memory was in use. I tried to clsoe out everything that I knew I didnt need but I'm afraid to accidentaly close down something I shouldn't. I don't suppose there's a way to find out what programs I can and can't close down? I'll try completing disconnecting from online and disabling my anti virus.
Also, how do I slow down the burning speed when it auto-burns with Nero after DVD Shrink? It always automatically goes to 8x burn speed.
Finally, how do you burn using DVD Decrypter? I have the program and I usually use it to decrypt a movie that has copy protection errors, then open the files with DVD Shrink to shrink it and then burn with Nero. Thanks.
|
Moderator
|
11. June 2006 @ 11:04 |
Link to this message
|
|
Task manager will show you everything running. For now though since your not multi tasking just disconnect from the internet and anti virus (just turn it back on when done:). Depending on who you're using some can be resource hogs. But Shrink is pretty intensive too.
To change the burn spped in Shrink - when you click 'backup' there's a burn settings tab. Your can change your burn speed there. If you are using the same drive to read & write from (which it looks like you are) you may be limited on your burn speed options. Depending on your drive it may only list the burn speeds of the source disc and max.
Or you read from the one drive and write to the external - when the blank is inserted shrink will list the burn options on the blank.
To burn with decrypter from shrink. First open decrypter then go to mode and pick iso write. Set your burn speed to 4x at the bottom. Make sure the drive your want to burn too is selected under designation. Close decrypter.
In shrink once you click 'backup' under 'select backup target' pick 'iso file image & burn w/ DVD Decrypter'.
The media may be the problem here but let's see how this goes.
|
Junior Member
|
11. June 2006 @ 12:04 |
Link to this message
|
So i just tried to burn using DVD Decrypter. It was working fine up to 19% burning when I got an error and it failed the error said error reading data - cyclic redundancy check. I had the burn speed set at 4X
|
Moderator
|
11. June 2006 @ 12:32 |
Link to this message
|
You got a little farther but still a Coaster. You've cleaned up the pc.
So we need to rule out the media your using - playo not good and neither are the moser baer (imations one's I think).
See if you can borrow some better media (ones listed above) or pick some up - depending where you are there are weekly sales.
How much hard drive space do you have left out of how much?
Any other changes on this pc since this problem started?
|
Junior Member
|
11. June 2006 @ 12:45 |
Link to this message
|
|
I'm gonna see if I can borrow some media from a friend.
I have 39 GB of free hard drive space out of 80 GB
|
|
Advertisement
|
|
|
Moderator
|
11. June 2006 @ 13:08 |
Link to this message
|
|
Okay - hopefully media better will do the trick.
If not you will probably need to check the hard drive for errors.
41 gig may take a bit. But let's try the media 1st.
|
|
