|
TUT!HOW to FTP and BACKUP XBOX GAMES - With Crossover Cable
|
|
Member
|
29. September 2006 @ 16:09 |
Link to this message
|
|
well to be honest with you, AID is a little more popular then slayers evox. the reason i use slayers in this guide is because i, like you, got my xbox already modded with the chip in it, without any other custom dashboard. seeing as you don't seem to know very much about hard mod, i would reccomend you use a softmod. it is quite easy to do as long as you follow the instructions, and you don't have to even open up your xbox. by the sound of it you have found the problem and fixed it? what state is your xbox in right now? can you boot up the MS dashboard? can you still play games? right now they don't even have to be backups, because for softmod you need the original game. so here are youre choises:
you can try and obtain a copy of AID and try to install that on your xbox.
you can use the slayers evox autoinstaller disc and try again. you wont need to flash anything. simply install the apps and upgrades to your C drive. that should work.
or, you could remove your xbox mod chip alltogether and softmod it once the chip is out of there...i wouldn't reccomend this option i would think it safer for you to try and use an autoinstaller to upgrade from your ms dash. so before we try any of these, answer this question:
WHAT STATE IS YOUR XBOX IN NOW?what can it do?
|
|
Advertisement
|
|
|
|
|
lucifa666
Suspended permanently
|
1. October 2006 @ 20:31 |
Link to this message
|
|
Right now i turn my xbox on with nothing in the drive and it comes on than off three times than stayes on but the frount light is flashing green and red. nothing comes up on the screen, no error no dashbord. If i press eject in makes a wild sound and dose nothing if i press it twice it will open! it wont load orignal games or anything! nor will it load the evox autoinstaller disc .
Any help would be great!
|
|
poppadon
Newbie
|
2. October 2006 @ 15:59 |
Link to this message
|
I seem to be almost there. I get the original connection at 100mbps then start FlashFXP all settings are as per guide.
It says connecting to.... then connection closed. I recently bought this modded Xbox running Avalaunch. I asked the owner if he was ever able to use FTP and he said no.
I have been able to access other xbox's but this one seems to have problems.
How do I find out if xbox and xbox is still a valid userid and psw?
Any ideas appreciated.
PoppaDOn
|
Member
|
4. October 2006 @ 03:22 |
Link to this message
|
lucifa:
i really don't know what to do right now :( try posting your problem in a diferent forum, like xbox hardware boot.
to pop:
go into your avalaunch settings and check what the FTP settings are. make sure that the username and password for FTP are both "xbox" and that static IP is ON. also, Qwix is made by avalaunch and work well together so i'd also try FTP'ing with Qwix.
This message has been edited since posting. Last time this message was edited on 4. October 2006 @ 03:23
|
Member
|
27. October 2006 @ 23:31 |
Link to this message
|
|
Can't knock this tut I FTPed using this TUT
Arctic Monkeys are the greatest band in the world!!!
|
|
bassets
Suspended due to non-functional email address
|
29. October 2006 @ 05:51 |
Link to this message
|
|
Few questions:
1.Can this fook up my xbox?
2.can i still use xbox live after ive modded my xbox?
thanks ;)
WHAT THE HELL'S A SIG?!!? I'm scared! *quivers*
|
|
bassets
Suspended due to non-functional email address
|
29. October 2006 @ 06:06 |
Link to this message
|
also, if i backup my game, then use xiso tools to make an iso, and i put it on a DVD-R, will it work on a normal unmodded xbox? will it read it
WHAT THE HELL'S A SIG?!!? I'm scared! *quivers*
|
|
lucifa666
Suspended permanently
|
30. October 2006 @ 12:22 |
Link to this message
|
|
no mate it wont!!!!
|
|
XBOXruler
Newbie
|
8. November 2006 @ 19:57 |
Link to this message
|
when you have transfered the game to your pc, disconned the connection. use quix to create the iso. i use Alcohol 120% to make the disk. Open Alcohol 120%. on the left it should have button saying 'image burning wizard'.
click it. once done browse for the game folder. select it and click open. click next. insert a DVD-R rom and hit burn.
|
Member
|
9. November 2006 @ 17:07 |
Link to this message
|
|
@basset
no, to both of your questions.
Note:
At the very start of the tut i thought i made it clear that your xbox MUST BE MODDED FOR THIS TO WORK. that applys to both connecting, and booting.
|
|
freedomI
Newbie
|
10. November 2006 @ 08:29 |
Link to this message
|
|
Hopping for a positive answer - I have copied games to the harddrive on my pc and now I want to burn them to Dvd to play in the xbox - now the files are on the HD do they need to go through the ISO software?
Casey
|
Member
|
10. November 2006 @ 17:57 |
Link to this message
|
|
yes, now that you have the files on your PC HDD you will have to run it through an XISO program, then burn it to a dvd-r
|
|
lucifa666
Suspended permanently
|
11. November 2006 @ 20:08 |
Link to this message
|
|
Dont these people even read the tut??????
|
|
infnte
Newbie
|
6. December 2006 @ 14:59 |
Link to this message
|
I have a problem and I need some help. I've looked everywhere and it doesn't seem like anyone else has this problem.
I can burn an iso onto a dvd just fine and then put it in the xbox and evolutionx recognizes the disc as a game,(The upper right hand corner goes from saying "no disc" to "game")but when I click "Play game/media from DVD" it acts like it's about to play the game but stays on a blank screen. I've tried everything burning with Nero, dvd decryptor, alc 120; I've used craxtion and quix, but the same thing happens everytime.
SOMEBODY HELP ME!!!!!
I've been using DVD+R if that makes a difference, but I know people who have used this kind and it worked.
|
Member
|
8. December 2006 @ 05:14 |
Link to this message
|
|
depending on which drive you have, your xbox might have trouble reading DVD+R's, some do. try a diferent brand of media, or better, try using a DVD-R
|
|
janrocks
Suspended permanently
|
8. December 2006 @ 09:42 |
Link to this message
|
Decent quality DVD-R..that's the mission here. Some people have success with + but they are a serious minority. My samsung reads +rw..really cheap and nasty ones..Good ones are a waste of time..no disk (go figure)
there is a reason for all this. The xbox dvd-rom drive specs were written before +r disks became common. It is an unsupported format in the firmware so reading them is very hit and miss depending on how good (or otherwise) the laser is.
Blank screen while loading is very common with both qwix and craxtion. I have only had to use qwix once in 3 1/2 years. I don't want to comment on craxtion..but anything that needs M$ runtimes to work is out in my world... Try clonexb instead. It's easy and doesn't try to connect to the internet and spread info around..
Hi Omar..how's things? having fun?
This message has been edited since posting. Last time this message was edited on 8. December 2006 @ 09:44
|
Moderator
|
8. December 2006 @ 09:47 |
Link to this message
|
|
@omar3333 - 'fraid that sig has left some spare space on my screen (i can only use 1024x768 max on my laptop), let's have it shrunk down to fit the specs in my sig, thanks
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Tabzy
Suspended due to non-functional email address
|
12. December 2006 @ 10:37 |
Link to this message
|
|
hey omar 3333, i've been at my xbox ALL day searchin through forums n following ppl's advice n got nowere! now i came across ur thread read it n hey presto my pc connects to my xbox!! :D nice one. so...my question is, my xbox is currently transfering data to my pc at a whopping 30kb/s :( is this normal or can i get it faster? i'm using a network hub by the way in the middle of pc n xbox cos i've only jus decided 2day to back up my xbox game n dont own a cross over ethernet cable :)
|
|
Tabzy
Suspended due to non-functional email address
|
12. December 2006 @ 10:47 |
Link to this message
|
|
omg.... just as i posted that last reply the transfer rate shot up to 100+kb/s... wtf :s lol. is this more like normal speed?
cheers :)
|
|
pxss
Newbie
|
12. December 2006 @ 23:23 |
Link to this message
|
|
hi ppl i bought my xbox modded already but the thing is that when i turn on my xbox i have M$ dashoard and EvoX sign on the top left part of my screen, i dont know if my xbox is hard modded or softmodded cuz ive read alot of both and anyway my xbox is modded it should have a different dashboard, now im trying to install SlaYers EvoX 2.7 but i can't get my pc connected to my xbox, im using a crossover-cable and flash FXP, in my pc it appears local network connected but when i try to connect woth flash FXP it appears connection failed(connection timed out)
Im using the following settings on evox auto-installer 2.7:
normal IP:0.0.0.0
Use Static IP: No
Static IP:192.168.1.200
Subnetmask:255.255.255.0
DefaultGateway:192.168.1.1
DNS:194.63.248.1
DNS:217.13.7.140
Im using the following settings on my lap-top:
IP adress:192.168.1.200
Subnetmask:255.255.255.0
DefaultGateway: . . .
Preffered DNS: . . .
Alternate DNS: . . .
any help would be appreciated. thnx
PXSS ~~ Born 2 Ride ~~ BLUE WOLF
|
|
Tabzy
Suspended due to non-functional email address
|
13. December 2006 @ 04:35 |
Link to this message
|
hi pxss, u need to make sure static ip is turned ON or says YES. and makes sure u check if user name and password is enabled on ur xbox settings and that u put them in when ur connecting through ur FTP client. its normaly user name = xbox and same for password. If that doesnt work, keep the settins i jus told u and in ur FTP client setting try enabling 'use passive mode' if passive mode doesnt work change it to 'use active mode' i use filezilla as my FTP client btw, found it so much easier :) so am not sure were passive or active mode would be in ur client but they will be in there somewere, its jus matter of lookin for it. hope this helps :)
|
|
Tabzy
Suspended due to non-functional email address
|
13. December 2006 @ 04:39 |
Link to this message
|
|
o and in ur laptop ip settings put .2 instead of .200 mite sound weird but wiv pc's every lil thing helps :)
|
|
pxss
Newbie
|
14. December 2006 @ 02:25 |
Link to this message
|
|
thnx i found the problem i had something wrong in my network settings i dont know what but its workin gr8 now thnx for ur help
PXSS ~~ Born 2 Ride ~~ BLUE WOLF
|
Member
|
14. December 2006 @ 17:10 |
Link to this message
|
HEY EVERYONE! sorry havn't been around lately, was away on holidays :)
what's goin on Jan? :) definately have a lot of fun around here :P
@px,
you're going to have to burn the slayers EvoX autoinstaller to a DVD-R for it to work :)
btw, your xbox is hard modded. the EvoX logo in the corner most likely means you have EvoX bios running, but havn't updated to dashboard. so, like i said, burn the slayers evox autoinstaller to a DVD-R and you're good to go. also, when installing, be careful of what you are doing...to many people screw up their xbox's when using autoinstallers
@Tabzy if you're not connecting through crossover cable, then 100kb/s is probably the speed youre going to get, i would reccomend buying a crossover cable as they're cheap and easy to use
btw, i am surprised you were able to connect using my tut. if you didnt have a crossover cable LOL :)
This message has been edited since posting. Last time this message was edited on 14. December 2006 @ 17:37
|
|
Advertisement
|
|
|
Member
|
14. December 2006 @ 17:38 |
Link to this message
|
|
WOOT 100th POST!! :D
party time :)
|
