|
|
|
Dvd Shrink/ Nero illegal disc error
|
|
|
alishia28
Newbie
|
19. August 2006 @ 15:59 |
Link to this message
|
I have looked and looked and tried everything that everyone has listed with no luck. I have never had any problems with burning dvd's. I am having troubles burning on Sony DVD-R. I have burned over 400 movies with this same kind of discs without problems. Now it will start writing the lead in and then it says illegal disc. I have updated my driver, updated Nero to 6.6.0.18 from 6.3.1.11, switched the target dvd size to 4300 and everything with still no luck. I can use off brand dvd's without problems. I thought it was a bad batch of discs so I took them back and tried again. The first one worked but same thing started happening again. Do I need a new burner? It's driving me crazy. Here is the log from the last burn:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <DVDRW DRW-3S163> Version: BSG5 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : COMBI RW16x10/DVD atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDRW DRW-3S163 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
COMBI RW16x10/DVD E: CDRom0
DVDRW DRW-3S163 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 253MB (260080kB)
Free physical memory: 86MB (88828kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.8.2006
NeroAPI
7:08:48 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
7:08:48 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
7:08:48 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
7:09:12 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
7:09:12 PM #5 Text 0 File Writer.cpp, Line 122
Writer DVDRW DRW-3S163 running
7:09:12 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
7:09:13 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:09:13 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:09:13 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
7:09:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 678927 (150:52.27, 1326MB)
7:09:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
7:09:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVDRW DRW-3S163, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
7:09:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:09:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 678928 (678928) = #678928/150:52.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 678928 blocks [DVDRW DRW-3S163]
--------------------------------------------------------------
7:09:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVDRW DRW-3S163] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1390444544, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
678928 | lead-out | 1 | 0x41 | 0x00
7:09:18 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
7:09:18 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
7:09:18 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
7:09:18 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
7:09:18 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:09:18 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
7:09:18 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
7:09:18 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
7:09:18 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:10:07 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
19:10:07.359 - DVDRW DRW-3S163\H1 T1 : Queue again later
7:13:51 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09F20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
7:13:51 PM #27 CDR -1046 File Writer.cpp, Line 311
Illegal disc
7:13:51 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:13:51 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:13:51 PM #30 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 991
7:13:51 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
7:13:51 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
7:13:51 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/5/2006 10:00:50 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Please Help
Thanks
Alishia
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
19. August 2006 @ 17:20 |
Link to this message
|
|
Moderator
|
19. August 2006 @ 17:41 |
Link to this message
|
|
Hi alishia28
As gwen said not a lot wrong in your log.
Physical memory : 253MB
Free physical memory: 86MB
Memory in use : 65 %
512mb is better. Add some if you can. In the mean time keep as much memory free as possible. No multi tasking and shut down any unncessary processes.
Now for the illegal disc - you drive may not have the updated media codes 16x -R media you are using (sony). Usually the reason for this error.
For your drive -R is max 8x burn- they may not have all the media codes for 16x -R - just a guess.
What was the rated burn speed on the previous Sony's? How about the off brand that you are able to burn to?
|
|
alishia28
Newbie
|
19. August 2006 @ 18:32 |
Link to this message
|
I believe they are the same discs. I will have to call Best Buy to find out. I didn't pay attention. If for some reason they don't make the ones I usually use anymore, what would you all suggest that would be around the same prices. $30ish for 50 pack. I have the same problem when I try Maxell. I've unistalled Nero and running the cleaning tool then I will download again. How do I know that all of Nero has been uninstalled?
Thanks for your help already
Alishia
|
Moderator
|
19. August 2006 @ 19:06 |
Link to this message
|
16x media is the norm in alot of areas recently (us). 8x or lower is harder to fine. My quess is the ones you were using before were 8x.
You can check this if you like by popping one of these older burned ones in your drive then go to NeroToolKit>CD-DVD Speed>Disc tab. It will list the supported write speeds.
Verbatim would be good or Best Buy has a sale tomm on Sony's 100 for 24.99. If you can only find 16x speed try +R instead - may do better w/ these. Your drive is made by Liteon and looks like it supports booktyping. For +R discs you can booktype them to DVD-Rom making them almost universally compatible.
Uninstall all Nero programs in add/remove programs then run the clean tool and you should be good.
Keep us posted.
Oh & no problem on the help :)
|
AfterDawn Addict
|
20. August 2006 @ 13:47 |
Link to this message
|
|
I agree Binkie I think his drive is having problems with the new Sony16X discs.
|
|
alishia28
Newbie
|
20. August 2006 @ 19:53 |
Link to this message
|
Well I just ran the Nero tool to compare the discs and you are right. The discs I had been using were 8x. I couldn't tell the difference because it doesn't say on the discs and the packages are just alike. Thank you all so much for you help. At least I know now nothing else is wrong.
Thanks
Alishia
|
Moderator
|
20. August 2006 @ 20:35 |
Link to this message
|
You're welcome alishia28
If you want to use the 8x -R media best bet is to get it online.
You can get genuine Taiyo Yuden -R's for about the same price as instore. They run free shipping specials a lot.
Great site I use (US)
http://supermediastore.com
|
|
alishia28
Newbie
|
24. August 2006 @ 09:54 |
Link to this message
|
Okay, I give up. I got onto bestbuy.com and they had the 8x Sony
DVD-R discs so I ordered them. Well I got the package today and it was 16x again. So they said that they will send me a new one. If they send me another 16x I'm going to go crazy. My problem is the burner I have says it's a 16x but it won't burn at 16x. Is there a burner that will use 16x disc without any problems? Does that make any since? I just don't like ordering online and all the stores around me are only carrying 16x discs.
Thanks in Advance
Alishia
|
AfterDawn Addict
|
24. August 2006 @ 13:34 |
Link to this message
|
|
Almost all new burners will burn discs at 16 X. I would suggest a very cheap but excellent burner, the benQ DW1650, at newegg.com when they have them for about 30-35USD. But you really don't want to burn them that fast any way. I have 2 16X burners and never have written one faster that 8X. I'm using the 8X,Sony MIJ labelled TY T02s +Rs booktyped to DVD-ROM. I burn the 16X verbs at 8X also. I wouldn't order sony discs on line because you could end up with Sony, made in Taiwan, discs which are not so desireable!! JM2C
|
|
mdweaver
Newbie
|
24. August 2006 @ 13:46 |
Link to this message
|
I myself am having the same issue and then some, using TDK or Ridata Media I find myself unable to burn DVDs and bootable CDS. I have tried the built in burner an LG-GSA4082N which fails. I have sent the laptop to Acer 3 times now to have this resolved, have done an RMA exchange on the DVD drive, using the factory restore discs, using the Adaptec ASPI Layer, reinstalling the driver, reinstalling Nero.
My most recent effort is to use a TDK0400DVRWD usb drive it still fails with the following error. (My firmware is uptodate)
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On
DiskPeripheral : IC25N080ATMR04-0 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N E: CDRom0
TDK DVDRW0404N F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 759MB (777644kB)
Free physical memory: 472MB (483616kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.8.2006
NeroAPI
2:14:11 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
2:14:11 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
2:14:11 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:14:12 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
2:14:12 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:14:12 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:14:12 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:14:12 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:14:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
2:14:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
2:14:12 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
2:14:12 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:14:12 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [TDK DVDRW0404N]
--------------------------------------------------------------
2:14:12 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TDK DVDRW0404N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
2:14:12 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:14:12 PM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:14:12 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:14:12 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
2:14:12 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:14:12 PM #20 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
2:14:12 PM #21 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
2:14:12 PM #22 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
2:14:12 PM #23 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:14:12 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x30 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
2:14:12 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
2:14:12 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
2:14:12 PM #27 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
2:14:12 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:14:12 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
24. August 2006 @ 15:59 |
Link to this message
|
|
@alishia28
Your burner may be fine - it's a 16x burner but only for +R discs - 8x max for -R.
So the 16x -R are probably causing the problem.
You should be okay w/ good media using 16x +R.
Yep finding lower rated media in areas is like finding a needle in a haystack :)
I've used supermediastore along with many others here for over 2 years - no problems and a great place to buy -R 8x Taiyo Yuden. Might want to give it a try.
@mdweaver
Looking like you have the same problem. Your burn fails in less than a sec.
Your drive does not like the media.
The external hasn't had a firmware update in 2 years. Looks like the internal drive had one last year.
From the media code in the log TTH02 - this could be either 8x or 16x media.
For either drive I would try 8x rated media - ones to use are recommended above.
If you are in the US the link for supermediastore is above too.
You can also check the aspi & make sure nothing shows as corrupted just in case. Go to NeroToolKit>InfoTool>aspi tab.
|
|
mdweaver
Newbie
|
24. August 2006 @ 17:46 |
Link to this message
|
System Aspi shows nothing. NeroAspi looks good. I will try the slow media. Thanks Binkie. Any idea what might be causing the Bootable CD issues? I can burn the disc fine in Nero but its missing files when i try to boot. Ill post the internal drive log for the dvd and the burn log of the boot CD shortly.
|
|
mdweaver
Newbie
|
24. August 2006 @ 17:56 |
Link to this message
|
Burning the bootable disc
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVDRAM GSA-4082N>Version: HR02 - HA 0 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4082N>Version: HR02 - HA 0 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082N atapi Port 0 ID 1 DMA: On
DiskPeripheral : IC25N080ATMR04-0 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082N E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 759MB (777644kB)
Free physical memory: 338MB (346468kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.8.2006
CD Image
6:50:32 PM #1 Text 0 File Burncd.cpp, Line 2948
HL-DT-ST DVDRAM GSA-4082N
Buffer underrun protection activated
6:50:32 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
6:50:32 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082N running
6:50:32 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media
6:50:32 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 296658 ( 65:57.33)
6:50:32 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:50:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4082N;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
6:50:32 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:50:32 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 296659 (296659) = #296659/65:55.34
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296657 blocks [HL-DT-ST DVDRAM GSA-4082N]
--------------------------------------------------------------
6:50:32 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4082N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 607864832, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
296659 | lead-out | 1 | 0x41 | 0x00
6:50:32 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 296659 -> 296657.
6:50:33 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:50:33 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
6:50:33 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:50:33 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3,600 KB/s)
6:50:33 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:50:33 PM #17 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
6:50:58 PM #18 SCSI -1039 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04090000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x0A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x14 0x04 0x80 0x09 0x01
6:50:58 PM #19 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error
6:50:58 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:50:58 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:50:58 PM #22 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x00 0x3A 0x00
6:50:58 PM #23 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x038B4C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x00 0x3A 0x00
6:50:58 PM #24 CDR -1080 File WriterStatus.cpp, Line 197
Disc not present
6:50:58 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 197
Could not perform EndTrack
6:50:58 PM #26 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
HL-DT-ST DVDRAM GSA-4082N\H0 T1
6:50:58 PM #27 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
6:50:58 PM #28 Text 0 File Mmc.cpp, Line 16452
<HL-DT-STDVDRAM GSA-4082N> start Close Session
6:50:58 PM #29 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x00 0x3A 0x00
6:50:58 PM #30 CDR -1080 File WriterStatus.cpp, Line 249
Disc not present
6:50:58 PM #31 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
6:50:58 PM #32 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
6:50:59 PM #33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3,600 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
24. August 2006 @ 17:56 |
Link to this message
|
|
@mdweaver
Ok you're good on the aspi - you had mentioned aspi in your post so thought might as well check just in case.
On the bootable cd may not be of much help there but I'll try. What kind of bootable cd are you trying to do?
|
Moderator
|
24. August 2006 @ 18:15 |
Link to this message
|
|
Ok on the cd - you are using the 'cd-rom boot' option correct? Don't see that in the log but it may not show. Does show cd image.
This is a failed burn. Most of the errors -like Focus or tracking error can be due to the media.
CMC Magnetics Corporation doesn't make good cd's or dvd's.
Better to use cd wise would be made in Japan Fuji & Maxell - usually made by Taiyo Yuden - great for cd's & dvd's.
Burn process failed at 24x
For the cmc's try 16x or lower.
|
|
RichieTD
Suspended due to non-functional email address
|
28. August 2006 @ 08:34 |
Link to this message
|
OK I had the same problem and have now resolved this.
I checked the make of my drive then did a firmware update search. One of the flashes (as they are called) deals with the X16 issue.
Here is a list if that helps.
http://forum.rpc1.org/dl_all.php
|
|
Nero63
Suspended due to non-functional email address
|
28. August 2006 @ 11:05 |
Link to this message
|
@ richietd
as you can see, alishia's f/w is up-to-date, have tried to get info on the "gsa4082n" but can only come up with the "gsa4082b", gotta hand it to LG, they haven't updated computer components since '04.
@ alishia28
sorry your getting hijacked but if your still having problems, please do not hesistate to post.
If the slower media fixed the issue let us know, outside of checking your firmware to ensure that it's the latest version, you might consider changing the drive position to master on the cable, a relatively easy switch, position jumper to CS and switch to connector on end of cable, same with your combi-drive, switch jumper to C/S and position to the second/slave position on the cable. You may also wish to check your aspi, as described by binkie7 earlier in the thread.Quote:
You can also check the aspi & make sure nothing shows as corrupted just in case. Go to NeroToolKit>InfoTool>aspi tab.
@ mdweaver
where did you get your drive at? e.g. U.S.A., U.K., etc. cannot not find that drive with the "n" option only the "b"
edit=typo
Birds fly, coasters don't This message has been edited since posting. Last time this message was edited on 28. August 2006 @ 11:08
|
AfterDawn Addict
|
28. August 2006 @ 13:07 |
Link to this message
|
|
@Nero63
The B and N are next door on the keyboard. Maybe he hit the wrong key.
|
|
Nero63
Suspended due to non-functional email address
|
28. August 2006 @ 13:18 |
Link to this message
|
@garmoon
that's what's got me, his system shows it to be a "gsa-4082-n"
Quote:
<HL-DT-ST DVDRAM GSA-4082N>Version: HR02
plus using CMC MAG media, that's not good. Gotta be a european version, but checked the "global site" for LG and nothing on that drive.
edit typo(s),add. info
Birds fly, coasters don't
This message has been edited since posting. Last time this message was edited on 28. August 2006 @ 13:27
|
|
alishia28
Newbie
|
28. August 2006 @ 15:54 |
Link to this message
|
I checked out the aspi in Nero tools and it shows that the system aspi is not installed but the Nero aspi is installed and working properly.
I still have yet to get the discs back from Best Buy. I hope they are 8x. Other discs that I've tried that are 8x and 4x work fine. I just don't want to have to search and search for them if I don't have to. Everywhere I have been looking has all switched to 16x.
As for switching it to the primary channel, when i first installed it I tried to but my whole computer started messing up. I'm not the greatest at computers so some things go over my head. Do I need to take the combo drive out of the top "hole" and put the burner there? I tried just switching the cables around but the combo drive cable thing wouldn't fit in it right.
I recently got the computer I'm using now. I don't think there is much difference between the two. Should I take the burner at of the 1st one and put it in the second?
1: HP Intel Celeron CPU 2.0 GHz 1.99 GHz, 256MB of ram
2: Compaq Intel Celeron CPU 2.60 GHz 2.60 GHz, 248MB of ram
I just don't understand why a 16x burner won't read 16x discs. I don't want to burn them that fast, I just want to be able to use them.
Thanks Everyone for helping
I don't know what I'd do without afterdawn
Alishia
|
Moderator
|
28. August 2006 @ 16:11 |
Link to this message
|
|
Hey alishia28
Well it's a 16x drive but for +R only not -R - max for that format is 8x.
Your up to date on the firmware - last one was 2/06 and my quess is Sony 16x -R media codes not included - is somewhat newer media.
So you have another burner in a 2nd pc you can swap? What's the make and model of that one.
|
|
RichieTD
Suspended due to non-functional email address
|
28. August 2006 @ 16:36 |
Link to this message
|
|
@ alishia28 & Nero63
See what you mean.
Have you tried contacting LG? Maybe a compatable files exists under LG another productcode.
|
|
alishia28
Newbie
|
28. August 2006 @ 19:30 |
Link to this message
|
|
I don't have a second burner, I was just wondering if it would work better in one pc over the other. If I were to buy another burner, is there one you all would suggest that I could buy at a store and not online, that would read 16x +&-R. Am I making any sense???
Thanks
Alishia
|
|
Advertisement
|
|
|
|
mdweaver
Newbie
|
28. August 2006 @ 19:36 |
Link to this message
|
|
It is not a mis type. GSA4082B is the OEM drive made by LG which has a firmware update. The GSA4082N is the Acer Specific version of the drive which has no firmware update and it is not possible to use the 4082B to flash the 4082N.
|
|
