|
Burning suddenly takes forever
|
|
Member
|
20. December 2007 @ 01:14 |
Link to this message
|
I have noticed within the past 3 weeks that it takes much longer to burn a disc than it took before. It used to take about 12-15 minutes to burn an entire disc to a single layer disc but now it takes about an hour. I have been using Sonic RecordNow for the most part and Imgburn every now and then. In Sonic RecordNow, it says it is burning at 1.0 to 1.8 speed which takes about an hour. Before, it would burn about 4-6 speed. It does this on all discs recently. I have not changed the media at all, same brand same speed same spindle, 16x. I checked the setting in RecordNow and it said "Burn speed max". It takes the same amount of time with Imgburn also. I defragmented my hard drive and it didn't make any difference with the burn time. BTW, this is my laptop I am talking about. When I use the same media in my desktop, it only takes about 12 minutes to burn. Any suggestions?
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
20. December 2007 @ 03:58 |
Link to this message
|
your drives are probably in PIO mode you need to get them back into DMA mode you can fix that in device manager by uninstalling the IDE controllers rebooting and let windows reinstall them or use this guide
http://forums.afterdawn.com/thread_view.cfm/260038
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
This message has been edited since posting. Last time this message was edited on 21. December 2007 @ 03:54
|
AfterDawn Addict
1 product review
|
20. December 2007 @ 14:44 |
Link to this message
|
Originally posted by ZoSoIV:
your drives are probably in PIO mode you need to get them back into DMA mode you can fix that in device manager by uninstalling the IDE controller rebooting and let windows reinstall them or use this guide
http://forums.afterdawn.com/thread_view.cfm/260038
Solid advice from ZosoIV.
ZosoIV, missed ya and Merry Christmas to you and yours!
"The flimsier the product,the higher the price"
Ferengi 82nd rule of aqusition
 |
AfterDawn Addict
|
21. December 2007 @ 03:55 |
Link to this message
|
Quote:
ZosoIV, missed ya and Merry Christmas to you and yours!
you to man I hit your shoutbox
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
Member
|
21. December 2007 @ 20:24 |
Link to this message
|
|
@ ZoSoIV & iluvendo
Thank you so much for the great advice and the guide by alkohol! I checked and the primary "current transfer mode" was in PIO mode even though the "transfer mode" showed DMA if available. I followed the guide and it worked perfectly! I'm back to burning in 15 minutes. I'm used to helping others with their questions but I have never run into this problem before. Thanks again and Merry Christmas to the both of you.
|
AfterDawn Addict
|
21. December 2007 @ 23:56 |
Link to this message
|
|
great orion250 glad we got you going. what causes that problem is read errors of bad/scratched/dirty DVDs that your backing up.
and merry christmas to you!!
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
Member
|
22. December 2007 @ 01:11 |
Link to this message
|
|
Do you know what PIO stands for?
|
AfterDawn Addict
|
22. December 2007 @ 01:14 |
Link to this message
|
here read this
http://en.wikipedia.org/wiki/Programmed_input/output
I see your an high-end car audio fan
I'm running in my ZR2 Blazer A Alpine CDA-7998 head-unit(best head-unit Alpine ever made) ,2-JL amps (4 channel and a mono amp) , JL component speakers plus Polk 6x9s and a MTX 8500 12" dual voice-coil subwoofer in a sledgehammer box hitting about 145 SPL
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
This message has been edited since posting. Last time this message was edited on 22. December 2007 @ 01:24
|
Member
|
22. December 2007 @ 22:51 |
Link to this message
|
I had an obsene system until someone stole my mazda truck and cleaned the stereo out of it. My truck was recovered minus the system. I never replaced it after that because the insurance wouldn't cover it. A loss of about $8500.00. I had a Pioneer deck with a 6 disc changer, Orion eq., Orion crossovers, 6 Orion 12" dual voice coil sub woofers, mids and tweets along with the old school (better amps) Orion amplifiers. I had 1 Orion 225 HCCA (high current class amplifier - red amp) for each pair of 12's. On the high end, I had an old school Orion 2150. I also had an Orion 250 HCCA which I would swap back and forth with the 2150 every now and then. I had more 225 HCCA's on standby for spares whenever I would blow an amp, I could just swap them out within a couple of minutes until I got around to getting it fixed. I still have 2 left which haven't been fired up in years. I miss the good old days!
|
AfterDawn Addict
|
22. December 2007 @ 22:59 |
Link to this message
|
|
lol cool sounds like an kickass system
my ears have suffered from highend car audio so i can't play it quite as loud anymore
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
Member
|
22. December 2007 @ 23:24 |
Link to this message
|
|
What was that, I can't hear you! Check out a couple of amps I had on my profile page.
|
AfterDawn Addict
1 product review
|
23. December 2007 @ 17:38 |
Link to this message
|
Originally posted by ZoSoIV:
here read this
http://en.wikipedia.org/wiki/Programmed_input/output
I see your an high-end car audio fan
I'm running in my ZR2 Blazer A Alpine CDA-7998 head-unit(best head-unit Alpine ever made) ,2-JL amps (4 channel and a mono amp) , JL component speakers plus Polk 6x9s and a MTX 8500 12" dual voice-coil subwoofer in a sledgehammer box hitting about 145 SPL
Dude I see u like JL Audio Quality. While I'm not into car audio, I'm into home theatre. Just got 4 myself 4 Christmas a JL Audio fathom f-113 powered sub.Looking forward to hooking it up.
"The flimsier the product,the higher the price"
Ferengi 82nd rule of aqusition
|
AfterDawn Addict
|
23. December 2007 @ 18:37 |
Link to this message
|
|
should kick butt for sure
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
3 product reviews
|
23. December 2007 @ 20:44 |
Link to this message
|
Originally posted by iluvendo:
Originally posted by ZoSoIV:
here read this
http://en.wikipedia.org/wiki/Programmed_input/output
I see your an high-end car audio fan
I'm running in my ZR2 Blazer A Alpine CDA-7998 head-unit(best head-unit Alpine ever made) ,2-JL amps (4 channel and a mono amp) , JL component speakers plus Polk 6x9s and a MTX 8500 12" dual voice-coil subwoofer in a sledgehammer box hitting about 145 SPL
Dude I see u like JL Audio Quality. While I'm not into car audio, I'm into home theatre. Just got 4 myself 4 Christmas a JL Audio fathom f-113 powered sub.Looking forward to hooking it up.
Definately got the jealousy thing going on right now.
@Zoso
My truck audio system got ripped off and i had to replace the window they broke in taking it. Two MTX thunder 6000 10 inch and a Rockford Fosgate amp. Then, last month i got T-boned so i don't even have my truck anymore. :(
|
AfterDawn Addict
|
24. December 2007 @ 00:13 |
Link to this message
|
Quote:
My truck audio system got ripped off and i had to replace the window they broke in taking it. Two MTX thunder 6000 10 inch and a Rockford Fosgate amp. Then, last month i got T-boned so i don't even have my truck anymore. :(
damn man thats unfortunate, reminds me of that song "If It Wasn't For Bad Luck I Would Have No Luck At All" huh lol
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
AfterDawn Addict
1 product review
|
24. December 2007 @ 00:59 |
Link to this message
|
Originally posted by ZoSoIV:
Quote:
My truck audio system got ripped off and i had to replace the window they broke in taking it. Two MTX thunder 6000 10 inch and a Rockford Fosgate amp. Then, last month i got T-boned so i don't even have my truck anymore. :(
damn man thats unfortunate, reminds me of that song "If It Wasn't For Bad Luck I Would Have No Luck At All" huh lol
ZoSo Bro, that's my sig!
"The flimsier the product,the higher the price"
Ferengi 82nd rule of aqusition
|
AfterDawn Addict
|
24. December 2007 @ 04:22 |
Link to this message
|
|
well damn if it isn't LMAO!!
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
Advertisement
|
|
|
AfterDawn Addict
3 product reviews
|
24. December 2007 @ 08:15 |
Link to this message
|
|
Sometimes i think it should be my sig. Lol.
|
