|
Dvd Decrypter/imgburn problem
|
|
Newbie
|
21. November 2008 @ 23:04 |
Link to this message
|
I have been using these for a long time and I have moved my computer, Now when I try to burn with either program I get this message
I 22:51:30 DVD Decrypter Version 3.5.4.0 started!
I 22:51:30 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 22:51:30 Initialising SPTI...
I 22:51:30 Searching for SCSI / ATAPI devices...
I 22:51:30 Found 1 DVD±RW and 1 DVD-RAM/±RW!
I 22:51:50 Operation Started!
I 22:51:50 Source File: E:\GET_SMART.ISO
I 22:51:50 Source File Sectors: 2,201,967 (MODE1/2048)
I 22:51:50 Source File Size: 4,509,628,416 bytes
I 22:51:50 Source File Implementation Identifier: DVD Shrink
I 22:51:50 Destination Device: [2:1:0] ATAPI DVD A DH16A1L KH1A (F:) (Fibre)
I 22:51:50 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 6x, 8x, 12x, 16x)
I 22:51:50 Destination Media Sectors: 2,201,967
I 22:51:50 Write Mode: DVD
I 22:51:50 Write Type: SAO
I 22:51:50 Write Speed: MAX
I 22:51:50 Link Size: Auto
I 22:51:50 Test Mode: No
I 22:51:50 BURN-Proof: Enabled
E 22:51:53 Failed to Reserve Track! - Command Sequence Error
E 22:51:55 Operation Failed! - Duration: 00:00:04
I can't even burn any of the movies I have on my computer from the past
Please can anyone help me with this problem tell me what I'm doing wrong!!!!
I have not changed any of my settings, just turned it on and tried to use it again!!!!!
|
|
Advertisement
|
|
|
|
Moderator
1 product review
|
21. November 2008 @ 23:54 |
Link to this message
|
Quote:
(Disc ID: CMC MAG. AM3)
Have you changed discs...if not you should. I'd also suggest upgrading to Imgburn as DVD Decrypter hasn't seen support in years.
|
Newbie
|
22. November 2008 @ 00:01 |
Link to this message
|
I have changed disk and I do have imgburn also but I'm getting the same error on both programs Their both saying
Failed to Reserve Track! - Command Sequence Error
|
Moderator
1 product review
|
22. November 2008 @ 00:30 |
Link to this message
|
|
What did you rip your movie with?
|
Senior Member
|
22. November 2008 @ 10:27 |
Link to this message
|
How old is your Burner?
Is The Firmware Up-to-date?
What Version is Your Imgburn?
You could Use Better Quality Media (Verbatum or TYs)
Slow Burn Speed Down To 1/2 The rated Speed of the Blank Media.
|
Newbie
|
23. November 2008 @ 00:07 |
Link to this message
|
I updated my version to the newest imgburn available last night and got the same message and my drives are fairly new just got them about 3-4 years ago!! I don't know about firmware ??? I want to thanks you for your help but when I turned my home computer on today I couldn't even get it to run, so I took it in for repair!!! Hopefully that will fix the problem!!!! Thanks again
I tried to rip it with DvdFab5.1.1 FixVTS Dvd shrink & img burn
|
|
Big_Easy
Newbie
|
23. November 2008 @ 19:34 |
Link to this message
|
I am also getting an error please help if you can
I 18:44:48 ImgBurn Version 2.4.2.0 started!
I 18:44:48 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)
I 18:44:48 Total Physical Memory: 2,087,564 KB - Available: 1,258,612 KB
I 18:44:48 Initialising SPTI...
I 18:44:48 Searching for SCSI / ATAPI devices...
I 18:44:48 Found 1 DVD-ROM and 2 DVD±RW/RAMs!
I 18:45:37 Operation Started!
I 18:45:37 Source File: C:\Users\Big Easy\Images\madden09.dvd
I 18:45:37 Source File Sectors: 3,825,924 (MODE1/2048)
I 18:45:37 Source File Size: 7,835,492,352 bytes
I 18:45:37 Source File Volume Identifier: XGD2DVD_NTSC
I 18:45:37 Source File Volume Set Identifier: 34672923
I 18:45:37 Source File Implementation Identifier: Sonic Scenarist 3.1
I 18:45:37 Source File File System(s): ISO9660, UDF (1.02)
I 18:45:37 Destination Device: [4:0:0] TSSTcorp CDDVDW SH-S223F SB00 (D:) (RAID)
I 18:45:37 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)
I 18:45:37 Destination Media Sectors: 4,173,824
I 18:45:37 Write Mode: DVD
I 18:45:37 Write Type: DAO
I 18:45:37 Write Speed: 2.4x
I 18:45:37 Link Size: Auto
I 18:45:37 Test Mode: No
I 18:45:37 OPC: No
I 18:45:37 BURN-Proof: Enabled
I 18:45:37 Book Type Setting: N/A
I 18:45:37 User Specified L0 Data Zone Capacity: 1,913,760
I 18:46:23 Filling Buffer... (40 MB)
I 18:46:24 Writing LeadIn...
I 18:46:29 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)
I 18:46:29 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)
I 18:46:29 Writing Layer 0... (LBA: 0 - 1913759)
I 19:06:17 Writing Layer 1... (LBA: 1913760 - 3825923)
I 19:26:06 Synchronising Cache...
W 19:26:07 Potential 'WaitImmediateIO' Deferred Error - (0/3) - The request could not be performed because of an I/O device error.
W 19:26:09 Synchronise Cache Failed! - Reason: The request could not be performed because of an I/O device error.
W 19:26:09 Retrying (1 of 3)...
W 19:26:10 Potential 'WaitImmediateIO' Deferred Error - (0/3) - The request could not be performed because of an I/O device error.
W 19:26:11 Retry Failed - Reason: The request could not be performed because of an I/O device error.
W 19:26:11 Retrying (2 of 3)...
W 19:26:12 Potential 'WaitImmediateIO' Deferred Error - (0/3) - The request could not be performed because of an I/O device error.
W 19:26:13 Retry Failed - Reason: The request could not be performed because of an I/O device error.
W 19:26:13 Retrying (3 of 3)...
I 19:26:14 Closing Track...
W 19:26:15 Potential 'WaitImmediateIO' Deferred Error - (0/3) - The request could not be performed because of an I/O device error.
W 19:26:18 Close Track Failed! - Reason: The request could not be performed because of an I/O device error.
W 19:26:18 Retrying (1 of 3)...
I 19:26:19 Finalising Disc...
W 19:26:20 Potential 'WaitImmediateIO' Deferred Error - (0/3) - The request could not be performed because of an I/O device error.
W 19:27:17 Finalise Disc Failed! - Reason: The request could not be performed because of an I/O device error.
W 19:27:17 Retrying (1 of 3)...
W 19:27:17 Retry Failed - Reason: The request could not be performed because of an I/O device error.
W 19:27:17 Retrying (2 of 3)...
W 19:27:17 Retry Failed - Reason: The request could not be performed because of an I/O device error.
W 19:27:17 Retrying (3 of 3)...
W 19:27:17 Retry Failed - Reason: The request could not be performed because of an I/O device error.
E 19:28:05 Failed to Write Image!
I 19:28:05 Exporting Graph Data...
I 19:28:05 Graph Data File: C:\Users\Big Easy\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223F_SB00_SUNDAY-NOVEMBER-23-2008_6-45_PM_MKM-001-00_2.4x.ibg
I 19:28:05 Export Successfully Completed!
E 19:28:05 Operation Failed! - Duration: 00:42:28
I 19:28:05 Average Write Rate: 3,219 KB/s (2.3x) - Maximum Write Rate: 3,365 KB/s (2.4x)
|
Moderator
1 product review
|
24. November 2008 @ 08:11 |
Link to this message
|
Quote:
I 18:45:37 Destination Device: [4:0:0] TSSTcorp CDDVDW SH-S223F SB00 (D:) (RAID)
Is your burner really in RAID? You may try disabling it in your BIOS.
|
|
Big_Easy
Newbie
|
24. November 2008 @ 10:07 |
Link to this message
|
I had it plugged in to A VIA SATA card and then I switched back to The Mobo. Now Im good.
|
|
Advertisement
|
|
|
Moderator
1 product review
|
24. November 2008 @ 10:18 |
Link to this message
|
|
Congrats...happy burning.
|
