|
Overclocking AMD Athlon XP 2000
|
|
|
lilsmitty
Suspended due to non-functional email address
|
6. July 2004 @ 20:12 |
Link to this message
|
|
thanx. yes that is the cooler i have. i meant a pure copper base, not the whole thing. i meant my final parts would arrive tomorrow. july 8. i only need about 200 mhz so i should make it easy i think. maybe even go a little higher
|
|
Advertisement
|
|
|
|
|
Praetor
Moderator
|
7. July 2004 @ 08:20 |
Link to this message
|
Quote:
i only need about 200 mhz so I should make it easy I think. maybe even go a little higher
With the Barton's I would say, given the right chipset, that wouldnt be a problem however the TBredB's OC ceiling was kinda low.... you should be able to hit 200Mhz OC but watch the temps -- you may consider upgrading the HSF to something more "aggressive". Visit the cooling thread for ideas and suggestions
|
|
Kamran
Member
|
7. July 2004 @ 22:20 |
Link to this message
|
|
I Have a 2 HDD
Master
Manufacturer: Hitachi-HGST
Model: Deskstar 7K250 HDS722580VLAT20 08K0462 / 13G0818 / 14R9246
Type: ATA IDE-Ultra/100
Capacity: 82.3gb
Details: 7200rpm, 8.5ms access, 2mb cache, -757mbit/sec raw, 29.7-61.4mbyte/sec sustained, 1" high
Guarantee: 3yr
Slave: Seagate
Model Number:ST310014ACE
Capacity:10 GB
Speed:5400 rpm
Seek time:12.7 ms avg
Interface:Ultra ATA/100
I was wondering on which one should I have my os?
i have it on the 80 gb currently is this ok or can get better performance i do something else
|
|
Praetor
Moderator
|
7. July 2004 @ 23:08 |
Link to this message
|
|
New topic... new thread... it keeps things clean :)
|
|
Kamran
Member
|
7. July 2004 @ 23:53 |
Link to this message
|
|
sorry
|
|
Kamran
Member
|
14. July 2004 @ 18:35 |
Link to this message
|
As you can see I have successfully oc my xp2000+ to a xp2400+ but what i want to know is how i can unlock the multiplier. I also set my ram at 166.
This message has been edited since posting. Last time this message was edited on 14. July 2004 @ 18:36
|
|
Kamran
Member
|
14. July 2004 @ 18:39 |
Link to this message
|
|
Praetor My next question is to you mainly.
Am just not happy with my current set up.
I got a new hdd a new graphics card
what i want is a new cpu and some ram!
any suggestions
can 1g ram work in conjunction with my 256 ram
My current ram is 256 ddr sdram pc3200
does the new ram i buy have to be pc3200 aswell
and what processor should i get that will work with my current mobo and and am looking at only spending £150
I got a job yesterday and 50% of money will go on my comp
|
|
Praetor
Moderator
|
14. July 2004 @ 18:54 |
Link to this message
|
|
New topic new thread... really.. thats the only thing thats keeping this place clean .... harsh enforcement :)
To change your multiplier, goto your bios and usually the line right after where is says the final clock speed of the chip, change that multiplier (you may have to goto Manual mode). Make sure you change your Multiplier slowly and test at each stage :)
|
|
MannyF38
Junior Member
|
17. July 2004 @ 14:48 |
Link to this message
|
|
Kamran What Core do u have? if its a TB like my you can OC a litle more.
AMD 64 2800+ skt 754
Lan Party UT 250gb
XMS3200 DDR400
Maxtor 10 SATA 120gb x 2
Lite On DVD-R/CD-R
Diablo Powmax 580W
Antec Modified Performance Case
|
|
MannyF38
Junior Member
|
17. July 2004 @ 14:52 |
Link to this message
|
|
Ah sry lol din't see that in the Pic ... i see its TB
AMD 64 2800+ skt 754
Lan Party UT 250gb
XMS3200 DDR400
Maxtor 10 SATA 120gb x 2
Lite On DVD-R/CD-R
Diablo Powmax 580W
Antec Modified Performance Case
|
AfterDawn Addict
1 product review
|
17. July 2004 @ 14:58 |
Link to this message
|
|
While overclocked at the same level can run a compltete 3dmark 2003 test and send an image of its results, or a log file? I'd really like to see them.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
|
jt020254c
Newbie
|
19. July 2004 @ 18:04 |
Link to this message
|
|
was just reading through some of the eairler msges on page 1 and saw a note saying that the amd xp2000 could be pushed to 2300. just thought ide let u know im running mine at 2600 (2.1mhz reported in dxdiag)have taken it hightr but my ram over heated. oh and cpu temp is 28.6c. (water cooled system)
full sys is amd 2000 as 2600, 1gb ram, 128mb vidcard, 120mb hdd + 20gb hdd for windows.
|
AfterDawn Addict
1 product review
|
19. July 2004 @ 18:13 |
Link to this message
|
|
Nice speed for that core, but I'm still giving a recommendation for the Barton core, because water cooling isn't that cheap. Barton hits those speeds for $85. BTW I want a water cooling system too, tweak-em as long as you can.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
|
jt020254c
Newbie
|
20. July 2004 @ 03:07 |
Link to this message
|
|
im trying to push further just to see the limit. managed to put my water cooling system together for £90 thats a full cooling system for £40 and a large radiator for £50
|
|
MannyF38
Junior Member
|
20. July 2004 @ 03:34 |
Link to this message
|
|
am running the xp2000 as a xp2600 2.08ghz runing at 52c on die...
AMD 64 2800+ skt 754
Lan Party UT 250gb
XMS3200 DDR400
Maxtor 10 SATA 120gb x 2
Lite On DVD-R/CD-R
Diablo Powmax 580W
Antec Modified Performance Case
|
|
jt020254c
Newbie
|
20. July 2004 @ 05:55 |
Link to this message
|
|
ide never think u could get the 2000xp that high with normal cooling, have a m8 trying to run his 2400 normaly and its at 45c but the system keeps crashing, as soon as he drops the chip to 2200 it runs fine at a temp of 40c. so underclocking the chip is the only way to get it to run, we cant think why it is doing this
|
|
MannyF38
Junior Member
|
20. July 2004 @ 07:07 |
Link to this message
|
|
i have a volcano 11+ on it.... and are you reading that 45c on die?are you reading it from the BIOS? thats good temp for the Xp2400 If its not on die then your probably close to 60c on die...
AMD 64 2800+ skt 754
Lan Party UT 250gb
XMS3200 DDR400
Maxtor 10 SATA 120gb x 2
Lite On DVD-R/CD-R
Diablo Powmax 580W
Antec Modified Performance Case
|
|
jt020254c
Newbie
|
20. July 2004 @ 15:58 |
Link to this message
|
|
the 45c is readign in the bios, he is going to try a much better heatsink to see if this helps it at all
|
|
Praetor
Moderator
|
20. July 2004 @ 19:39 |
Link to this message
|
Quote:
i have a volcano 11+ on it....
Ive tried the Volc11+ and the Volc12 Extreme ... thats a damn nice speed youvoe got ('course I was using a KT400 so that prolly chops out half my OC potential)
:)
|
|
rice4me
Newbie
|
20. July 2004 @ 21:24 |
Link to this message
|
|
I havent read all that you guys have said but from what i can see you guys only got it to 2.0 ghz and i just wanted to let you know that you can actually get it to at least 2.2ghz... mine is at 2.281ghz (12x190)@1.65vcore.So far the highest on load is 52. I dont think thats that bad. But for some reason i cant go to 200 fsb... not even 8x200 or anything like that. It might be my ram though cuz i have some horrible pc3200.
ASUS A7N8X-X,XP2000+ "unlocked" OC ot XP3200+
Horrible pc3200
60GB 2MB
GeForce4 Ti4200 128MB
|
|
Praetor
Moderator
|
20. July 2004 @ 22:14 |
Link to this message
|
|
That's exceptional for a Palomino and 2Ghz is a fair estimation of the avg OC potential for most Palo-2000s (at least its been the case for all the one's, except one, that ive dealt with).
:)
|
|
MannyF38
Junior Member
|
21. July 2004 @ 04:08 |
Link to this message
|
|
i got it to go to about 169fsb by 1mhz manual stepping and got it to 2.1ghz still telling me i got a Xp2600+ at 2.1Ghz i don't know why ?... should be reading Xp2800 atleast.. if i increase the fsb anymore to like 170fsb it won't boot but is probably my memory lolcuz am running pc2100 lol sopsoe to only run at 133..
AMD 64 2800+ skt 754
Lan Party UT 250gb
XMS3200 DDR400
Maxtor 10 SATA 120gb x 2
Lite On DVD-R/CD-R
Diablo Powmax 580W
Antec Modified Performance Case
|
|
IceMS
Newbie
|
23. July 2004 @ 17:07 |
Link to this message
|
|
I tried to find the OC limit for my Tbred-B AthlonXP2000+ and I ended up with hair-standing results :))
It works fine all the way from 12.5x133 to 12.5x168 with increasing temp of course (i have only the stock HSF) from 50 to 62°C (it's ok, but u sweat if you play long :))) ). Then I tried to change the mulitplicator as well.. with 13x it works fine until 160 MHz, with 13.5 until 155, with 14x until 149, with 15x until 143 (but it's really hot more then 67°C), and finally with 16x 136 (it's even hotter and not too stable). Oh, I forgot to mantion the voltage... so it's 1.6V in the beggining up to 1.85V @ highest speeds. The best temp/speed up OC i found out were 14x136 MHz 1.725V and 11.5x166MHz 1.725V, both 100% stable and not running too hot, only about 5-6 degrees hotter then normal (max 58-59°C) while boosting up performance by some 20-25% according to Sandra 2004 testing. I hope some might find these lines a bit helpful.
Athlon xp2000+ @ xp3000+ (2140 MHz - 10x214MHz, BOX HSF)
MB Abit KV7 KT600
RAM 256 MB (Nanya Technology PC3200, DDR400 CL3)
GeForce 4 MX440 270/405 @ 300/500
HDD Seagete 40 GB (some old crap ;))
|
AfterDawn Addict
1 product review
|
23. July 2004 @ 17:15 |
Link to this message
|
|
IceMS
Get some better cooling because that's too warm.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
|
Advertisement
|
|
|
|
IceMS
Newbie
|
24. July 2004 @ 05:41 |
Link to this message
|
|
very low budget... :/ I can't even afford a new cooling. anyway, what would be your suggestions on this? which cooling (affordable, let's say 30-40$ max) ?
I already read the whole Official PC cooling thread, yet i'd like to know your inputs. The only fans i've got installed are CPU, NB and the one on power supply, no add-ons.. Oh and I left my case opened at one side - it helps for me to keep it cooler when i do the OC (if temps around 60°C might be regarded to as something cool ;)) )
Athlon xp2000+ @ xp3000+ (2140 MHz - 10x214MHz, BOX HSF)
MB Abit KV7 KT600
RAM 256 MB (Nanya Technology PC3200, DDR400 CL3)
GeForce 4 MX440 270/405 @ 300/500
HDD Seagete 40 GB (some old crap ;))
This message has been edited since posting. Last time this message was edited on 24. July 2004 @ 06:09
|
