|
digivox xl ,keeps rebooting
|
|
|
mby70
Junior Member
|
12. November 2008 @ 14:48 |
Link to this message
|
|
Like wise cannot get the ver1230 posted on this thread to work chdl error, managed to get it back to ver1220 by power on/off and flashing again, has anyone got a link to a version of ver1230 that works?
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
12. November 2008 @ 15:34 |
Link to this message
|
|
1230 does not work on new boxes,try a factory reset first and then power off box and reflash with a fresh 1220 then let box reboot then scan for channels.
|
|
mby70
Junior Member
|
12. November 2008 @ 16:45 |
Link to this message
|
|
I've had the box since about February, is that new? I've got it working again on the 1220. So should I factory reset then flash with 1230? The rebooting aint a massive issue, just a bit of pain.
|
AfterDawn Addict
|
12. November 2008 @ 17:18 |
Link to this message
|
|
u can try and see if it works if it does come up with chdl u will have 2 leave 1220 on it for the time being.
|
|
mby70
Junior Member
|
15. November 2008 @ 07:08 |
Link to this message
|
|
Think I might end up going back to v102, don't remember the reboot happening when I had that verion on.
Can't understand how v1230 is only 125kb when v102 & v1220 are amlost 300kb?
|
AfterDawn Addict
|
15. November 2008 @ 10:06 |
Link to this message
|
|
as far as i am aware 1220 is a full program,whereas the 1230 is only a top up patch.someone said to me to say go back to v102 then 1230 and see if it works.
|
|
mjh321
Newbie
|
15. November 2008 @ 16:03 |
Link to this message
|
Originally posted by mby70:
Think I might end up going back to v102, don't remember the reboot happening when I had that verion on.
Can't understand how v1230 is only 125kb when v102 & v1220 are amlost 300kb?
The copy of v1230 I have saved on my PC is 290kb big not 125kb. I have a Digivox XL running v1230 with no problems. I purchased my XL early 2008.
This message has been edited since posting. Last time this message was edited on 10. December 2008 @ 12:09
|
|
mby70
Junior Member
|
16. November 2008 @ 04:37 |
Link to this message
|
Originally posted by mjh321:
Originally posted by mby70:
Think I might end up going back to v102, don't remember the reboot happening when I had that verion on.
Can't understand how v1230 is only 125kb when v102 & v1220 are amlost 300kb?
The copy of v1230 I have saved on my PC is 290kb big not 125kb. I have a Digivox XL running v1230 with no problems. I purchased my XL early 2008. Cud email v1230 if anyone wants to try using it??
This message has been edited since posting. Last time this message was edited on 16. November 2008 @ 05:32
|
AfterDawn Addict
|
16. November 2008 @ 05:19 |
Link to this message
|
|
remove ur email at once or every spammer will hit you u can pm someone by clicking on the icon of face/head to send that person a private message
|
|
mby70
Junior Member
|
16. November 2008 @ 06:49 |
Link to this message
|
|
Thanks. I guessed there must be a way to pm someone. ;)
|
|
mjh321
Newbie
|
16. November 2008 @ 16:23 |
Link to this message
|
Attention all those who have had problems loading v1230 firmware onto Digivox XL :- Is the firmware file you used only 125kb? If so it could be that the file is either corrupt or incomplete. I have a copy of v1230 and the size of this file is 290kb. This file works no problem...
|
|
mby70
Junior Member
|
18. November 2008 @ 11:27 |
Link to this message
|
Originally posted by mjh321:
Attention all those who have had problems loading v1230 firmware onto Digivox XL :- Is the firmware file you used only 125kb? If so it could be that the file is either corrupt or incomplete. I have a copy of v1230 and the size of this file is 290kb. This file works no problem...
Thanks for the file mjh. No problem loading it up, no chdl, box now says V13-2000 on system info, I'm guessing this is right? Hasn't rebooted yet anyway.
Cheers.
|
AfterDawn Addict
|
18. November 2008 @ 15:29 |
Link to this message
|
Originally posted by mby70:
Originally posted by mjh321:
Attention all those who have had problems loading v1230 firmware onto Digivox XL :- Is the firmware file you used only 125kb? If so it could be that the file is either corrupt or incomplete. I have a copy of v1230 and the size of this file is 290kb. This file works no problem...
Thanks for the file mjh. No problem loading it up, no chdl, box now says V13-2000 on system info, I'm guessing this is right? Hasn't rebooted yet anyway.
Cheers.
i hope that is a verified file as i have not seen that around anywhere.
|
|
mjh321
Newbie
|
18. November 2008 @ 16:21 |
Link to this message
|
Originally posted by cactikid:
Originally posted by mby70:
Originally posted by mjh321:
Attention all those who have had problems loading v1230 firmware onto Digivox XL :- Is the firmware file you used only 125kb? If so it could be that the file is either corrupt or incomplete. I have a copy of v1230 and the size of this file is 290kb. This file works no problem...
Thanks for the file mjh. No problem loading it up, no chdl, box now says V13-2000 on system info, I'm guessing this is right? Hasn't rebooted yet anyway.
Cheers.
i hope that is a verified file as i have not seen that around anywhere.
The file was downloaded from nokias.co.uk before nokias put the membership restriction on his site...
This message has been edited since posting. Last time this message was edited on 10. December 2008 @ 12:11
|
|
megcam
Junior Member
|
20. November 2008 @ 15:05 |
Link to this message
|
i got my xl today,tried to download v.1230 and(290kb) and kept getting chdl,have tried to download v.1220 and still geting chdl,been at this for hours any help greatly appreciated,cheers
|
|
mby70
Junior Member
|
20. November 2008 @ 15:25 |
Link to this message
|
|
Turn off the box before you start the update. Start the update on the pc then switch the box on (1 or 2 seconds) then the update should begin. Try the v1220 first, then if you have the larger version of v1230 I'd advise you put that on. It was the small version of the v1230 (link posted on this thread) that gave me the chdl error as well.
|
AfterDawn Addict
|
20. November 2008 @ 15:25 |
Link to this message
|
|
bad flash,load the loader with 1220,box powered off,press download on loader and switch box on it might work first time or 10 th time.
|
|
megcam
Junior Member
|
20. November 2008 @ 16:12 |
Link to this message
|
Originally posted by mby70:
Turn off the box before you start the update. Start the update on the pc then switch the box on (1 or 2 seconds) then the update should begin. Try the v1220 first, then if you have the larger version of v1230 I'd advise you put that on. It was the small version of the v1230 (link posted on this thread) that gave me the chdl error as well.
cheers,eventually got it working with v1220,i have the 290kb v1230 but i couldnt get it working,is there a major difference between the 2
|
AfterDawn Addict
|
20. November 2008 @ 16:28 |
Link to this message
|
|
v1230 was brought out to fix a problem with rebooting some boxes had it leave 1220 on it for now it will be here if its needed.
|
|
mby70
Junior Member
|
20. November 2008 @ 16:32 |
Link to this message
|
|
The 290kb version of v1230 works for me. Have you tried uploading it again since you got rid of the chdl error?
The only difference is you may find the box will reboot every hour or so with v1220 when you are watchin something, v1230 fixes that problem.
|
AfterDawn Addict
|
20. November 2008 @ 17:05 |
Link to this message
|
Originally posted by mby70:
The 290kb version of v1230 works for me. Have you tried uploading it again since you got rid of the chdl error?
The only difference is you may find the box will reboot every hour or so with v1220 when you are watchin something, v1230 fixes that problem.
and if it does not work box is rejecting it.
|
Junior Member
|
21. November 2008 @ 09:21 |
Link to this message
|
|
Just to let you all know,i have today reflashed my box with v1230 that was sent to me from mjh321.As i told him,it all went ok...its working for now ...i will report back in a weeks time with an update.
|
|
mby70
Junior Member
|
21. November 2008 @ 13:10 |
Link to this message
|
|
Top man mjh321, reboot problem solved, Cheers!
|
|
mjh321
Newbie
|
21. November 2008 @ 15:37 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 10. December 2008 @ 12:13
|
|
Advertisement
|
|
|
Senior Member
|
24. November 2008 @ 15:47 |
Link to this message
|
Hi
Would anyone have a copy of this firmware?
The one in the link at the start seems to be corrupt, cause it just fails.
Cheers
Cathal
|
