|
DVDloader CDloader
|
|
|
ZGTA
Newbie
|
29. May 2004 @ 12:35 |
Link to this message
|
|
I'm sorry I had made an error I have a v9 or v10, and the option screen is blank on my dvd loader. thanks
|
|
Advertisement
|
 |
|
|
|
ZGTA
Newbie
|
30. May 2004 @ 14:43 |
Link to this message
|
|
Conny119 the file dvdloaderv7all with all the options works fine loads everything, splinter cell, hitman, shrek 2, everything. Burnt on first try. loaded first try. That how it should be. Thank you very much.
|
|
conny119
Suspended due to non-functional email address
|
30. May 2004 @ 15:22 |
Link to this message
|
|
no problem
|
|
skidmark5
Newbie
|
2. June 2004 @ 16:20 |
Link to this message
|
|
Okay. I'm having a similar problem. I have an NTSC v5 or v6 ps2 (I'm not sure, the serial is SCPH 30001R) with a slide card and Swap Magic DVD v2 and Swap Magic 3 CD v3.2 (US build). I burnt several CD loaders from Swapmagicfix.com on TDK media at 48x. I put in the Swap Magic CD, waited for it to load, then swapped it with the CD loader. I press X to do normal boot, and the screen goes red, with purple lines in the corner like some other people, except my ps2 is v5 or 6. I also have Memorex cd media, and I use Memorex DVD-R media, burning at 4x. I haven't been having problems with most DVDs and games, but Ratchet and Clank 2 won't even boot, and James Bond: EON boots, but freezes on some missions. What should I do?
This message has been edited since posting. Last time this message was edited on 2. June 2004 @ 16:22
|
|
andyfrank
Member
|
2. June 2004 @ 19:04 |
Link to this message
|
|
well that happens sometimes to me...try burning slower and make sure the disc tray is in ALL the way b4 u press x...make sure the guide pin is all the way to the right as it should be and try restarting the ps2
|
|
skidmark5
Newbie
|
3. June 2004 @ 15:39 |
Link to this message
|
Thanks a lot. Burning the CD loader with DVD Decrypter at 1x worked. I ended up with 3 coaster CDs and 1 coaster DVD.
|
|
Ronrice
Junior Member
|
3. June 2004 @ 18:12 |
Link to this message
|
|
you dont really need a cdloader or dvdloader for games that need it...just use this method
1.enter SM CD
2.Eject enter a real big ps2 disc refresh toc
3.switch game with backup (fliptop or slide card) press square
works everytime for me
|
|
skidmark5
Newbie
|
4. June 2004 @ 19:21 |
Link to this message
|
|
What do you mean by refresh toc? Do I just eject SM CD, put in a big game, and then swap it with the real game?
|
|
skidmark5
Newbie
|
4. June 2004 @ 19:28 |
Link to this message
|
|
Never mind, I just tried it, and it worked. Thanks a lot, this is so much easier than using CD loader.
|
|
killwhite
Newbie
|
5. June 2004 @ 17:20 |
Link to this message
|
Quote:
you dont really need a cdloader or dvdloader for games that need it...just use this method
1.enter SM CD
2.Eject enter a real big ps2 disc refresh toc
3.switch game with backup (fliptop or slide card) press square
works everytime for me
what does refresh toc mean? I cant figure this process out. thanks
M.A.
This message has been edited since posting. Last time this message was edited on 5. June 2004 @ 17:20
|
|
Ronrice
Junior Member
|
5. June 2004 @ 22:23 |
Link to this message
|
|
just do this
1.enter SM CD
2.Eject... enter a real big ps2 disc or SM DVd...after loadin
3switch game with backup (fliptop or slide card) press square
if you dont understand...then i dont know what to tell you...lol
|
|
skidmark5
Newbie
|
6. June 2004 @ 05:34 |
Link to this message
|
|
I don't know what TOC means, but it works for me. You don't need to know what it means.
|
|
Hanedrick
Senior Member
|
6. June 2004 @ 06:51 |
Link to this message
|
|
You are basically just inserting an original dvd game, such as the swap magic dvd disc, that is greater than or equal to your backup in toc(Table of Contents). The reason this works is because it "tricks" the ps2 into think that the backup you will eventually play is the same disc the original toc disc. The reason the toc original has to be equal to or larger than your backup is because if it were smaller then the contents of your backup would not be able to be loaded. That's why the say you must insert a game with a large table of content.
|
|
mrjakobie
Newbie
|
6. June 2004 @ 17:10 |
Link to this message
|
|
I believe I have a v7 PS2 and loaded the DVDLoader v7 b5.2 onlt to see the red color error. Can someone help?
|
|
kyle453
Newbie
|
7. June 2004 @ 06:26 |
Link to this message
|
|
At what point do you insert the big game? At the insert disk prompt? If that is the case, then when do you insert the backup?
Also, why can't you guys name some big games? I would assume FFX and GTA are both pretty big in size, but I don't rip my own games so I don't know.
|
|
SEGAbhoy
Suspended permanently
|
10. June 2004 @ 04:35 |
Link to this message
|
|
Where can i get dvd loader for my v5 console
Hail Hail the Celts are here
|
|
SEGAbhoy
Suspended permanently
|
10. June 2004 @ 04:38 |
Link to this message
|
|
Where can i get dvd loader for my v5 console
Hail Hail the Celts are here
|
|
conny119
Suspended due to non-functional email address
|
10. June 2004 @ 05:21 |
Link to this message
|
|
check the frist page of this thread it's all there
|
|
Hanedrick
Senior Member
|
10. June 2004 @ 13:13 |
Link to this message
|
I think there is only a version 7+ dvdloader. The only reason the dvdloader was created is because the swap magic 2 cd won't boot on v9/10 consoles and therefore could not boot the cdloader. If you have a version 5 ps2 just use the v1-6 cdloader which you can get from http://www.swapmagicfix.com
This message has been edited since posting. Last time this message was edited on 10. June 2004 @ 13:20
|
|
conny119
Suspended due to non-functional email address
|
11. June 2004 @ 00:49 |
Link to this message
|
|
a DVD loader will work on all versions. i used one for my V4 before i got my modchip
|
|
fcaico
Suspended due to non-functional email address
|
12. June 2004 @ 20:27 |
Link to this message
|
|
For some reason the DVD loader doesnt seem to work for me either. I have no trouble with DVD backups in general, but this one has got me stymied. When I put it in, SwapMagic ALWAYS goes to red.
And I cant get the CDLoader to work in my V10 PS2 eitehr. its like the loaders dont want to work in my PS2 :-/
|
|
conny119
Suspended due to non-functional email address
|
13. June 2004 @ 06:47 |
Link to this message
|
|
is the DVD loader file you have a ISO or is it BIN and CUE
|
|
CAM
Newbie
|
13. June 2004 @ 07:11 |
Link to this message
|
I am trying to backup Harry Potter. I am really having problems with dvd loader. I have a PS2 v10. I downloaded dvd loader, copied it, using DVD Decrypter at x1 speed on a ridata disk. I put in sm dvd 2.0, ejected, inserted DVD loader, hit the X, got a pink screen in the background and nothing happens. I even tried:
1.enter SM CD
2.Eject... enter SM DVd...did not load.
Can anyone tell me what I am doing wrong. Thanks
|
|
conny119
Suspended due to non-functional email address
|
13. June 2004 @ 07:14 |
Link to this message
|
|
you don't eject to use your slide tool or fliptop which ever you have.
|
|
Advertisement
|
|
|
|
CAM
Newbie
|
13. June 2004 @ 11:45 |
Link to this message
|
|
Ok, I inserted the sm dvd disk, used the slide tool, put in the dvd loader and hit X, all I get is a pink screen in the background. I also tried sm cd, used the slide tool, put in the dvd loader and hit x, nothing happens. Do you know what I am doing wrong.
This message has been edited since posting. Last time this message was edited on 13. June 2004 @ 11:49
|
