|
The Official OC (OverClocking) Thread!
|
|
|
NO Fanboy comments needed
|
Senior Member
3 product reviews
|
6. January 2008 @ 21:37 |
Link to this message
|
Chances are pretty slim to none, Sorry. you have what looks like an old Springdale (!865 varient) mATX w/ crossover socket to LGA775 to utilize DDR1 (PC3200)and Intel had no features for OC'n then.
The CPU has potential if put on a good mobo w/ good aftermarket CPU cooler and PSU. Any good !925XE, !955x, !975x will be fine for that but you will need to move to DDR2 and PCE-E to use them. At least the !975X is supportive of the recent Core 2's (up tyo E6850 and Q6700, no Peryn to my knowlegde) if upgrading later.
What is your budget for upgrade? There're several options to move in steps if on a budget, so taking as much as possable to the new system.
EDIT: This is the Celeron 340 for Socket T LGA775, correct? Cause it also came as a socket 478. I dooght the Springdale chipset will do anything better then the P4 560 and they get warm, but is a nice CPU for the non 64bit singles and OC very well if you get a different mobo later. I do know the ASUS and Abit !865g/GV series got the Intel 64bit w/ EIST BIOS support so the P4 660 would be possable (3.6 and excelent overclocker but on good mobo and cooling)
Good Luck!
Sony PSP/PS3,
ASUS RAMPAGE II EXTREME(X58) w/ i7 930 DO @ 4.305GHz (205x21 @ 1.323v) 2:8 DDR1680 @ 6-6-6-18
ASUS RAMPAGE EXTREME (X48) w/ Q6600 @ 3.81GHz, 422x9 @ DDR1680 6-7-6-20 @ 1.71v
ASUS CROSSHAIR w/ x2 6400+
This message has been edited since posting. Last time this message was edited on 6. January 2008 @ 22:03
|
|
Advertisement
|
|
|
|
AfterDawn Addict
2 product reviews
|
6. January 2008 @ 22:13 |
Link to this message
|
With that new PC, you sure you don't want to play games. I see you have a PS2 in your sig, but the graphics on that thing have been bad compared to anything else(except maybe the gamecube) since like 2001 lol.
EDIT: Also where do you live and what's your budget.
This message has been edited since posting. Last time this message was edited on 6. January 2008 @ 22:13
|
Member
|
7. January 2008 @ 00:53 |
Link to this message
|
|
Is the q-6600 much better then the e-6600?
p-4 3.2 prescott HT curently at 3.6/Abit IC7-G (Abit rule!)/2 Gig Mushkin extream 2.5-2-2-6
LG 20.1 FLATRON WIDESCREEN/BFG 6800 ultra@450 mgz/2 wd raptor 150 raid/Ultra 500 watt Direct connet ps
NZXT GUARDIAN CASE(BLUE)
|
AfterDawn Addict
2 product reviews
|
7. January 2008 @ 01:12 |
Link to this message
|
|
Well for video editing and other programs meant to use ALL four cores. If a program can only utilize two cores then they will perform exactly the same.
|
Member
|
7. January 2008 @ 01:31 |
Link to this message
|
I am using the e-6600 now and want to upgrade to the q-6600. My only problem is i am using the asus p5w dh deluxe. It is a good board, but not as good as with is out there now. I still can't figure out how to get my memory off of 4:3 to 1:1.
p-4 3.2 prescott HT curently at 3.6/Abit IC7-G (Abit rule!)/2 Gig Mushkin extream 2.5-2-2-6
LG 20.1 FLATRON WIDESCREEN/BFG 6800 ultra@450 mgz/2 wd raptor 150 raid/Ultra 500 watt Direct connet ps
NZXT GUARDIAN CASE(BLUE)
|
Member
|
7. January 2008 @ 01:35 |
Link to this message
|
hey now dont bag the ps2 lol yeah ps3 is alot better even though I have a wii lol
I live in california usa lol
my budget it 2$ really its whatever though I not too too expensive though
and I have to 500GB sata drives and a case so yep please help abuzar1
ps lol I got the nintedo 64 lol those graphics kick ass jk
My personal website project www.compufuze.com
please visit and give your feedback
My tech
Build 1duel core 2.40 2mb cache 500GB drive xfx 128 bit by256MB and 4 GB memory
Build 2 Nas w 1.5TB
Build 3 HP HDXc90 640GB w 2.66GHZ w 6mbcache 1 gig video
|
Senior Member
3 product reviews
|
7. January 2008 @ 03:04 |
Link to this message
|
|
I use both Q6600 and E6600 side by side and can say good about each for different reasons. Of corse I overclock so each one becomes better at different speeds and apps or games. At stock or same clock speeds, the quad is gonna feel snappier in just about everything, single tread or not, just because of the extra core for reserve. But add in multi treaded apps and the quad get ewven better.
I liike to OC mobos and RAM too so the duals do a better job at reaching higher FSB and clock. So naturally, for todays games, the OC'd dual has some potential.
Oh ya, I get to put the order in for my new Penryn mobile T9300 on my PM965 notebook to replace current T7700.
Sony PSP/PS3,
ASUS RAMPAGE II EXTREME(X58) w/ i7 930 DO @ 4.305GHz (205x21 @ 1.323v) 2:8 DDR1680 @ 6-6-6-18
ASUS RAMPAGE EXTREME (X48) w/ Q6600 @ 3.81GHz, 422x9 @ DDR1680 6-7-6-20 @ 1.71v
ASUS CROSSHAIR w/ x2 6400+
|
AfterDawn Addict
4 product reviews
|
7. January 2008 @ 05:28 |
Link to this message
|
Indeed. Normal Intel boards like that can't be overclocked, and even if they could, the hardware in most emachines units is of too poor quality to overclock well anyway. We're active in your other thread, so if you want advice a new PC build, post more details in there.
|
Senior Member
|
8. January 2008 @ 12:30 |
Link to this message
|
|
I have a GA-945-GCMX S2 motherboard, yes yes i know it sucks but this is just a "backup" when GA-P35-DS3R is avaliable in SA i'll get it, anyhoo how do you OC the ram? i can't change my multiplier, i can clock it down but not up, oh the mobo only supports dual channel DDR2 667 and not DDR2 800, and only 2 ram slots, max ram support is 2GB and i have 2GB DDR2 800, so i used it.
SEX
Now Ive got your attention please read my post above
Own: Computer, PS2, PS3, PSP and Asus UX32VD i5 Ultrabook
|
AfterDawn Addict
4 product reviews
|
8. January 2008 @ 12:34 |
Link to this message
|
|
Is it you that has A-Data RAM? if it is, I wouldn't bother overclocking the RAM, you probably won't get very far. If you want to try though, there should be a FSB:RAM Ratio section in your BIOS. If your FSB is 1333 and your RAM is 667mhz, it should be at 2.0. You may have to change the FSB to overclock your RAM because I think the next option up is 2.4, which will overclock the memory all the way to 800mhz - it probably won't handle that.
|
Senior Member
|
8. January 2008 @ 12:45 |
Link to this message
|
|
yes i have the A-Data ram and it's DDR2 800, and i don't see FSB:RAM Ratio section in my BIOS?
SEX
Now Ive got your attention please read my post above
Own: Computer, PS2, PS3, PSP and Asus UX32VD i5 Ultrabook
|
AfterDawn Addict
4 product reviews
|
8. January 2008 @ 12:50 |
Link to this message
|
|
Hmm, maybe the low end Gigabyte boards don't support it then. Either way it's not necessary to overclock your RAM to get a good CPU overclock. It's just an additional performance boost.
|
AfterDawn Addict
|
8. January 2008 @ 13:18 |
Link to this message
|
GTR35,
Quote:
yes i have the A-Data ram and it's DDR2 800, and i don't see FSB:RAM Ratio section in my BIOS?
What you are seeing that you can lower but not raise is the CPU/FSB Bus Ratio, not the memory. Hit Ctrl+F1 which will let you into the more advanced settings and enable you to save them, when you first enter the setup (only works on the main screen). Scroll down to the memory and put it on Manual and you should see the memory settings. I'm not very familiar with your MB but you should see the memory multipliers which should read 2.0, 2.40, 2.50 and so on.
BTW, the performance boost from overclocking the memory is much smaller than the performance boost you get overclocking the CPU. A lot depends on the CPUs multiplier as to what you can do with the memory speed. A CPU with a low multiplier makes getting to even stock memory speed difficult sometimes.
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
 |
Senior Member
3 product reviews
|
13. January 2008 @ 14:45 |
Link to this message
|
|
I know it's off the subjuct, but can somebody help with where to find replacemen or download for a Creative X-Fi Xtreme PCI-E Express mobile sound card CD?
Anybody here use it?
Sony PSP/PS3,
ASUS RAMPAGE II EXTREME(X58) w/ i7 930 DO @ 4.305GHz (205x21 @ 1.323v) 2:8 DDR1680 @ 6-6-6-18
ASUS RAMPAGE EXTREME (X48) w/ Q6600 @ 3.81GHz, 422x9 @ DDR1680 6-7-6-20 @ 1.71v
ASUS CROSSHAIR w/ x2 6400+
|
AfterDawn Addict
4 product reviews
|
13. January 2008 @ 15:04 |
Link to this message
|
hehe I have that problem too, and Creative force you to buy replacement CDs, they don't post the drivers on their website. I lost my SB External CD a while back - only solution I can suggest is to buy another and make an ISO of it so you never lose it again!
|
AfterDawn Addict
2 product reviews
|
13. January 2008 @ 15:10 |
Link to this message
|
Wow that's total bullshit. Every other company has drivers on their website and they want people to BUY them.
|
Senior Member
|
13. January 2008 @ 15:23 |
Link to this message
|
|
If they are not posted on the manufacturer's site...then you know...there has got to be a torrent out there...with them...
If not...once you get them...put one up...
|
Senior Member
3 product reviews
|
13. January 2008 @ 15:28 |
Link to this message
|
|
Creative has usually at least provided he driver and a few apps or plug ins but rarely do you ever get the entire CD contents like volume control, EAX console adn other basic hardware suport on CD like Diagnostics, sound fonts bank (I dont need but some use them).
I had the sammwith my x-Fi Elite Pro for my workstation, a friend couldnt get hld of the apps on CD so I had to upload it to file share. Back then , there were only few x64 drivers that worked and not all hardware console stuff worked in Vista or x64.
Sony PSP/PS3,
ASUS RAMPAGE II EXTREME(X58) w/ i7 930 DO @ 4.305GHz (205x21 @ 1.323v) 2:8 DDR1680 @ 6-6-6-18
ASUS RAMPAGE EXTREME (X48) w/ Q6600 @ 3.81GHz, 422x9 @ DDR1680 6-7-6-20 @ 1.71v
ASUS CROSSHAIR w/ x2 6400+
|
AfterDawn Addict
4 product reviews
|
13. January 2008 @ 15:33 |
Link to this message
|
|
That's right - you get the basic driver functionality, but not the graphic equalizer and other audio programs.
|
AfterDawn Addict
|
13. January 2008 @ 15:49 |
Link to this message
|
|
Creative labs must be the most BS company on the planet. I had all sorts of problems just getting drivers years ago for a Sound Blaster Live sound card. You would think that you owed them something the way they don't support you with the proper software. I can't even find the product listed on their website.
X-Fi Xtreme PCI-E Express mobile
They have a X-Fi Xtreme PCI-E listed but no mobile! What's up with that?
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
AfterDawn Addict
4 product reviews
|
13. January 2008 @ 15:53 |
Link to this message
|
|
Yep, I decided against buying my 5.1 speakers from them, not just because of that, but also because my last set of creative speakers became faulty, that and the fact that I was offered my Logitechs at a competitive second hand price. Their support isn't great (non-existant if you don't have proof of purchase) but I have no doubt they'd be slightly more willing if you could prove you owned the product.
|
Member
|
13. January 2008 @ 16:06 |
Link to this message
|
|
|
AfterDawn Addict
|
13. January 2008 @ 16:11 |
Link to this message
|
|
sammorris,
The thing I don't understand is how they stay in business treating their customers like that! It's not a recent development either. They've been like that since the late 80s. I remember going crazy with their first CD-Rom, which had an interface for it on the sound card. When you do call them (if you get them at all) they treat you like you were a thief and were trying to get over on them. I mean it's their friggin product! I mean is there a big market for "Black Market" sound cards! LOL!!
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
Senior Member
3 product reviews
|
13. January 2008 @ 17:16 |
Link to this message
|
Quote:
X-Fi Xtreme PCI-E Express mobile
It's basically the PCI-E version of the Audigy 2ZS Notebook card but in the new APU plus xpress card slot.
Quote:
Sound Blaster Live sound card.
I had to up that for another friend 5yrs ago, so I do still have the CD to convert to ISO if interested. It was the 5.1 Dolby (no THX or DTS) with older style game port on I/O plate.
Sony PSP/PS3,
ASUS RAMPAGE II EXTREME(X58) w/ i7 930 DO @ 4.305GHz (205x21 @ 1.323v) 2:8 DDR1680 @ 6-6-6-18
ASUS RAMPAGE EXTREME (X48) w/ Q6600 @ 3.81GHz, 422x9 @ DDR1680 6-7-6-20 @ 1.71v
ASUS CROSSHAIR w/ x2 6400+
|
|
Advertisement
|
|
|
AfterDawn Addict
4 product reviews
|
13. January 2008 @ 18:04 |
Link to this message
|
|
ck: You'll find they're the basic drivers. You want the full set of software you have to pay for it.
|
