|
The Official OC (OverClocking) Thread!
|
|
|
NO Fanboy comments needed
|
AfterDawn Addict
2 product reviews
|
4. February 2008 @ 19:33 |
Link to this message
|
Is it that big?
What I would do is just get the MDF file and use winrar to get it into two .rar files and burn them on two dvds.
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
4. February 2008 @ 19:37 |
Link to this message
|
abuzar1,
Quote:
What I would do is just get the MDF file and use winrar to get it into two .rar files and burn them on two dvds.
Won't work! You have to have the original disk in the drive to play it!
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
 |
AfterDawn Addict
|
4. February 2008 @ 19:45 |
Link to this message
|
what about mounting the image on a virtual drive with alcohol 120%? unless you plan to use the discs elsewhere, it should work.
i think i may have to get alcohol 120% again, just for the virtual drive mounting.
ps2: v7 scph-39001 - independence exploit - hdloader 0.8c - maxtor 300gb hdd
(+[__]%) psp slim ta-085v1: 6.60 PRO B10
wii (powered by bootmii/priiloader): 4.1u - d2x v10beta53-alt (base 56) - configurable usb loader v70r51/devolution r188 - wd scorpio black 7200rpm 320gig w/ ams venus ds2 enclosure
got a whole lot more to list . . .
This message has been edited since posting. Last time this message was edited on 4. February 2008 @ 19:46
|
AfterDawn Addict
|
4. February 2008 @ 19:53 |
Link to this message
|
cee43ja1,
Quote:
what about mounting the image on a virtual drive with alcohol 120%?
Tried that, but that only works with ISO, not MDF! I appreciate the response though.
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
AfterDawn Addict
2 product reviews
|
4. February 2008 @ 20:24 |
Link to this message
|
|
|
AfterDawn Addict
4 product reviews
|
4. February 2008 @ 20:25 |
Link to this message
|
Ah, my bad, it didn't even occur to me that you didn't know about Alcohol 120%! :)
You should be able to mount an mdf with DAEMONTools if you make a .mds file to go along with it...
|
AfterDawn Addict
|
4. February 2008 @ 22:24 |
Link to this message
|
|
sammorris & abuzar1,
First off, I haven't got a clue! Second none of the stuff I looked at has anything to do with backing up a DVD, only CDs. This is on an over 5GB DVD. I'll have to look into whether you can burn a dual layer data DVD. The sand in the hourglass is just getting too low for me to take the time to learn all of this. I'll save that for you younger guys! LOL!!
Thanks for all of your help,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
Senior Member
3 product reviews
|
4. February 2008 @ 22:25 |
Link to this message
|
theonejrs, Agreed, Alcohol120% rial or purchaced and you will be able to rip with to MDF or ISO and play directly from it's own Virtual drive or any conpatable virtual Imaging drive (ie. Deamon Tools or Magisic ISO and others, even Nero Image Drive) Yo need to know the type of copy protection of your own origional DVD/CD game to encrypt it and rewrite to new DVD+RW +R DL may work for most but some do require the RW disc.
Nevertheless, loading form HDD is always gonna' be faster then any DVD drive you can play it from. This is tyhe bes method for fast load and play times. Especially if loading from a RAID 0 set.
Good Luck!
Sony PSP/PS3,
ASUS RAMPAGE II EXTREME(X58) w/ i7 930 DO @ 4.305GHz (205x21 @ 1.323v) 2:8 DDR1680 @ 6-6-6-18
ASUS RAMPAGE EXTREME (X48) w/ Q6600 @ 3.81GHz, 422x9 @ DDR1680 6-7-6-20 @ 1.71v
ASUS CROSSHAIR w/ x2 6400+
|
AfterDawn Addict
|
4. February 2008 @ 22:38 |
Link to this message
|
|
NuckNFuts,
I appreciate the input, but it's just more than I can take on right now. I had a small heart attack Dec 2 and a mild stroke three weeks ago. I have a hard enough time concentrating on the things I do know, as it is. It's just more than I want to take on right at the moment.
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
Member
|
5. February 2008 @ 02:50 |
Link to this message
|
I just want to oc a bit over 3. I truely think the temp monitor is not accurate.. thats way to high! any help would be great.
Originally posted by BigDK:
Originally posted by baltekmi:
To BigDK
Quote:
BigDK, I have the same mobo as you and just purchased the q 6600 If you can give me some memory and cpu settings I would appricate it... Thanks!
bios 2406
memory corsair pc2 6400 (2x1g)
not sure abot the GO chip how do I find out?
Also I have the BFG 8800 GTS AND TEMPS show 165???
Looks like we're talking about the P5WDH not the DQ6.
I havn't used the quad core on my P5WDH, as it's still running with an E6600 on 2004 BIOS.
I'll check there's no issues with the latest version and then flash it later and see if there are any options that have appeared that aren't on my BIOS.
I can go with what I use, and offer those settings 'they won't be far off' but how stable it will be with a quad I'm not sure, I don't even know how the P5WDH performs well with a quad in OC terms at least.
I really don't want to move my quad as I've got really good flat contact at the moment.
Once I've had a chance to look I'll put some settings up for you.
That GPU temp seems very high, 8800GTS is a G92 chip I believe, so can't compare it to my card which the G90.
Is that youre idle temp 70'C, if so what full load temps are you getting?
I can't even get anywhere near 70'C under full load with it OC'd, what are you using to measure the temps, and what your case cooling like?
Do we have any other SP1M times to view, it's always good to see what everyone is getting out of their systems 12.704 my best so far on this rig, will try and bring that down today!
p-4 3.2 prescott HT curently at 3.6/Abit IC7-G (Abit rule!)/2 Gig Mushkin extream 2.5-2-2-6
LG 20.1 FLATRON WIDESCREEN/BFG 6800 ultra@450 mgz/2 wd raptor 150 raid/Ultra 500 watt Direct connet ps
NZXT GUARDIAN CASE(BLUE)
|
Senior Member
3 product reviews
|
5. February 2008 @ 17:48 |
Link to this message
|
|
You try Everest it gives pretty good readings of all temps in computer.
NVmonitor should also give you accurate temps for your card.
Those settings I gave in earlier post will give you 3Ghz, you should manage that on max 1.35 v or lower, some people report getting that speed on stock, I've never managed that myself.
|
AfterDawn Addict
4 product reviews
|
5. February 2008 @ 17:52 |
Link to this message
|
|
Shame everest can't read 3870s yet though... that's a bit of a bummer...
|
AfterDawn Addict
|
5. February 2008 @ 17:59 |
Link to this message
|
sammorris,
Quote:
Shame everest can't read 3870s yet though... that's a bit of a bummer...
Have you tried Everest Corporate 4.20. I have build 1170 and it seems to read everything. You also may have to remove it and re-install it to pick up the sensor properly.
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
|
Member
|
5. February 2008 @ 18:36 |
Link to this message
|
|
Sam everest reads my 3870 no probs...
FX8120 @ 4.5Ghz 1.3v,Asrock 970 extreme 3,8 gig crucial ballistix 1600 @ 1866, thermalright true spirit 140, 120gb Sandisk extreme ssd, 3TB second drive. Hd4830. Corsair Hx520 PSU.
|
AfterDawn Addict
4 product reviews
|
5. February 2008 @ 19:00 |
Link to this message
|
Not so here unfortunately...
|
Member
|
5. February 2008 @ 19:09 |
Link to this message
|
|
I use everest ultimate v4.201245 beta not sure if thats why...
FX8120 @ 4.5Ghz 1.3v,Asrock 970 extreme 3,8 gig crucial ballistix 1600 @ 1866, thermalright true spirit 140, 120gb Sandisk extreme ssd, 3TB second drive. Hd4830. Corsair Hx520 PSU.
|
AfterDawn Addict
|
5. February 2008 @ 19:32 |
Link to this message
|
|
sammorris,
Then too, you have had some problems with both cards so maybe something is wrong with the card! I also upgraded my MB bios to the latest. It didn't read my video card before that!
Don't know what MB bios version you are running, but F10 for yours is the latest!
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
This message has been edited since posting. Last time this message was edited on 5. February 2008 @ 19:39
|
AfterDawn Addict
4 product reviews
|
5. February 2008 @ 19:39 |
Link to this message
|
|
Ah right, maybe I need to do that too. I'll give that a miss just for getting temps in everest thanks...
|
AfterDawn Addict
|
5. February 2008 @ 19:43 |
Link to this message
|
sammorris,
Quote:
Ah right, maybe I need to do that too. I'll give that a miss just for getting temps in everest thanks...
See my EDIT! I was reluctant to do that myself, but I finally decided that if it didn't work to my liking (which it does!) I could always go back to what I had! Put it on a floppy or USB drive and use the F8 in the setup and it's a snap! The newest one for yours sems to be for the same thing as my F-11 bios!
Best Regards,
Russ
GigaByte 990FXA-UD5 - AMD FX-8320 @4.0GHz @1.312v - Corsair H-60 liquid CPU Cooler - 4x4 GB GSkill RipJaws DDR3/1866 Cas8, 8-9-9-24 - Corsair 400-R Case - OCZ FATAL1TY 550 watt Modular PSU - Intel 330 120GB SATA III SSD - WD Black 500GB SATA III - WD black 1 TB Sata III - WD Black 500GB SATA II - 2 Asus DRW-24B1ST DVD-Burner - Sony 420W 5.1 PL-II Suround Sound - GigaByte GTX550/1GB 970 Mhz Video - Asus VE247H 23.6" HDMI 1080p Monitor
This message has been edited since posting. Last time this message was edited on 5. February 2008 @ 19:44
|
Senior Member
3 product reviews
|
6. February 2008 @ 04:22 |
Link to this message
|
|
If there are issues with reading certain cards temp etc... you should feed this back to Lavalys so they can address it.
The support they give covers these problems, and by getting the feedback they at least will know what they need to fix.
It does however appear to work on Nvidia cards without an issue.
|
Senior Member
3 product reviews
|
6. February 2008 @ 04:30 |
Link to this message
|
Just checked, this issue is addressed in build 1277
Download this, reboot and try again, 1 users describe mouse lag after install, but no one else confirms this, also UT is shown as less than 5% min no value between 1-4% is displayed, but at least the temps issue is sorted.
http://www.lavalys.com/beta/everestultimat...sd9lz2macbx.zip
|
AfterDawn Addict
|
6. February 2008 @ 09:20 |
Link to this message
|
|
Thanks for the advice BigDK. ;) Your link didn't work for some reason and would that "same" advice apply to Corp Ed. too?..
.....gm
|
Senior Member
3 product reviews
|
6. February 2008 @ 11:33 |
Link to this message
|
|
Link won't work for me now either 'strange'
Not sure about versions if works with, I only use Ultimate and haven't found a need to update yet as the Nvidia reports all seem to be in line with other tools reporting temps.
|
Senior Member
3 product reviews
|
6. February 2008 @ 11:35 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 6. February 2008 @ 11:39
|
|
Advertisement
|
|
|
AfterDawn Addict
4 product reviews
|
6. February 2008 @ 12:10 |
Link to this message
|
|
Heh, no good, it's a trial version... It does, however pick up one of my GPU's temps, so it looks like I'm good to go if I get the new version.
This message has been edited since posting. Last time this message was edited on 6. February 2008 @ 12:11
|
