|
|
|
Power Calibration Errors
|
|
|
roryoss
Junior Member
|
24. February 2006 @ 08:19 |
Link to this message
|
mine just stopped burning dvds I still use it to burn cds but it just wont burn a dvd uless i use DVD-R and 2x discs which you cant find anymore any thing above that wont burn even if i slow the burn speed down!
|
|
Advertisement
|
 |
|
|
|
spud357c
Newbie
|
26. February 2006 @ 11:14 |
Link to this message
|
I'm not getting power calibration errors on my Pioneer 108 but something is happening on the last several movie burns. I'm using RitekG05 media (have for years) with both Nero and DVD Santa and the same thing happens.
Movies appear to burn fine with no errors and play fine until the last 5/10 minutes when there is extreme stutter, pixilation, loss of sound and freezing. This happens the same on several players so it has to do with the burn - anyone have any ideas ?
|
Moderator
|
28. February 2006 @ 08:56 |
Link to this message
|
very common problem. use decent burn speeds (not saying you aren't), no multitasking during the burn would be sensible, decent media (again, not saying G05 aren't). oh and burning to the outer edge of discs is not a good idea (for instance the default target size for DVD Shrink is 4464MB or thereabouts, i don't even trust that with my top notch 'Verbatim Taiyo Yuden' discs, i stick to 4300MB religiously
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
waleedwc
Senior Member
|
28. February 2006 @ 09:07 |
Link to this message
|
My laptop burner wont burn disks whatever i do, only burns to some old DVD-R that you could find long time ago, like 1x ones, otherwise it wont ever burn a game, any suggestions what could be the problem, it reads all disks fine, but doesnt burn, gives power calibration area error sometimes, currently im using a external burner, thats works perfectly, so it has nothing to do with the system, the burner that isnt working properly is also updated to its latest firmware, it is a sony dw-u50a.
|
Moderator
|
28. February 2006 @ 09:12 |
Link to this message
|
|
@waleedwc -
'fraid i gotta grouch about the huge sig pic (sizes are in the Rules in my sig). but the rest of this thread should glean the answers re Power Calibration errors...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
waleedwc
Senior Member
|
28. February 2006 @ 09:14 |
Link to this message
|
|
lol, k i get what you mean, i'll change it soon.
|
|
booondox
Newbie
|
17. March 2006 @ 23:15 |
Link to this message
|
|
BEFORE YOU TRY ANYTHING ELSE, TRY THIS.
All I had to do was open up the tray of my DVD/CDR burner, blew in it real hard with just my breathing, and it worked. We are talking about an easy fix here. Give it a try.
|
|
roryoss
Junior Member
|
18. March 2006 @ 02:44 |
Link to this message
|
|
@ creaky
Never had a problem using the full 4464mb setting in shrink ! how would you know if this was the/a problem ?? and
How do you change the setting from using the max <4464> down to say 4300mb ?? Thanx!
|
Moderator
|
18. March 2006 @ 02:50 |
Link to this message
|
the outer edge of the disc is where the dye is uneven on subpar discs.
If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
blakroach
Suspended due to non-functional email address
|
18. March 2006 @ 06:41 |
Link to this message
|
I'm writing to give thanks to all who replied to me, I thought that I had did so previously but looking through the page I see I didn't.My problem was as many suggested was the media that I was using. I found an old DVD-RW disc and burned an iso file I had on my hard drive and it was smooth sailing again. Got some better discs and no more problems. Again thanks to one and all!!
|
|
minameise
Newbie
|
14. April 2006 @ 18:38 |
Link to this message
|
|
Im having these problems and am wanting to update my FIRMWARE but Im not sure how to. I went to a link someone had posted called "the firmware page" but I couldnt find the type of drive I had in the list.
I have a toshiba laptop qosimo e15-av101 and I looked in my computer to find the name of the drive which I hope is the right name.
it is a: MATSHITA DVD-RAM UJ-830S
This message has been edited since posting. Last time this message was edited on 15. April 2006 @ 08:06
|
|
Doss2k
Newbie
|
15. July 2006 @ 23:18 |
Link to this message
|
|
I was receiving power calibration errors with my drive and figured it had died as well. I picked up a new LG 4166B, which in a whole other story, stopped working giving me write errors after about 5 burns. Since my old drive is out of warranty I figured I would open it up and see what I could figure out. Gave the rails and the lens a good rub down and it appears to be working again, at least it is finally burning one dvd as we speak, I will still ahve to let it play to see if it is a successful burn. So definitely if you plan on just trashing the drive and it is out of warranty open it up and give the lens either a shot of air or a gentle wiping with something lint free.
|
|
slipaway
Newbie
|
1. September 2006 @ 09:27 |
Link to this message
|
Yep, it was definitely the "blowing it with air". I was having all kinds of problems with "Power Calibration Errors" in Nero, and I made about 20-30 coasters... before I found this post. I read through it, and decided to give the "blowing it with air" a shot. Sure enough, that fixed it. The first DVD I tried after that, burned perfectly. I've already burned 12 DVD's since, and haven't had a single problem. It wasn't the media (I had been using the same media all along without a problem). It wasn't the firmware (why would the firmware even be a factor if I've been using the same media without a problem and I'm only half-way done with my spool of 100 DVD's, so the media hasn't changed, the firmware hasn't changed, it was just a bunch of dust build-up). I opened the DVD drive door, and just used some canned air to blow out all the dust. Then I closed the door, and tried to burn another DVD and it worked like a charm.
Thanks for the "blowing air" tip. Who would have thought a little dust would be causing so many problems. Thanks man! Don't sweat the haters, and thanks for the easy and simple fix!
|
|
Dynamo5
Junior Member
|
8. September 2006 @ 20:09 |
Link to this message
|
I've tried the air blowing and I still can't produce a DVD burn.
Heck my drive doesn't even recognize my DVD burner. I'm using Sony DVD+R and have never had a problem with them. I'm also using Nero 7.5.02 but this was happening even with Nero 6.6 when I had it.
|
Moderator
|
9. September 2006 @ 03:13 |
Link to this message
|
@Dynamo5 - have you started a thread in the Nero forum, with your logfile. If not you should do that ..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Sol1tary
Newbie
|
25. September 2006 @ 11:21 |
Link to this message
|
Hi guys.
Long time reader, first time poster.
Bit of a long post here but I don't want to leave anything out that may be relevent.
I have had my Sony DW-G120A for about a month and had no problems, now I am getting a power calibration error almost* every time I try to burn a Verbatim +R DL disc.
After the error the drive has a hard time reading the disc, clicking like crazy, requiring reinserting and then taking several minutes to recognise the blank.
*out of 4 discs used I have two coasters(totaly unreadable), after retrying discs that had power calibration errors, where the burn has started but failed soon after.
I have peviously burnt 5 of these discs with no problems soon after getting the drive.
I have blown out the drive with compressed air, used different power connectors and IDE channels, updated Nero, turned of IMAPI CD-Burning service and reflashed the firmware to no avail.
I think the drive may be defective.
I have two logs, one for a burn that resulted in a power calibration error, and the other if for a failed burn on disc that previously had a power calibration error.
********************FIRST LOG********************
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1
Recorder: <SONY DVD RW DW-G120A> Version: MYS4 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DW-G120A >Version: MYS4 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160812A nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : ST3160812A nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : SONY DVD RW DW-G120A nvatabus Port 0 ID 3 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-G120A F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 728MB (745808kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.9.2006
UDF/ISO compilation
2:24:20 AM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
2:24:21 AM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
2:24:21 AM #3 Text 0 File Isodoc.cpp, Line 6510
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:24:21 AM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
2:24:21 AM #5 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory
2:24:21 AM #6 Text 0 File Reader.cpp, Line 126
Reader running
2:24:21 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
2:24:21 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
2:24:21 AM #9 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media
2:24:21 AM #10 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4102287 (911:37.12, 8012MB)
2:24:21 AM #11 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD DVD)
2:24:21 AM #12 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: SONY DVD RW DW-G120A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
2:24:21 AM #13 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:24:21 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4102288 (4102288) = #4102288/911:37.13
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4102288 blocks [F: SONY DVD RW DW-G120A]
--------------------------------------------------------------
2:24:22 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [F: SONY DVD RW DW-G120A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8401485824, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 4102288 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4102288 | 0 | 0x00
4102288 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:24:42 AM #16 Text 0 File SCSIPassThrough.cpp, Line 61
Error on LockVolume: Access is denied.
2:24:42 AM #17 Text 0 File SCSIPassThrough.cpp, Line 107
SPTI - Error on DismountVolue: Access is denied.
2:24:52 AM #18 Text 0 File SCSIPassThrough.cpp, Line 61
Error on LockVolume: Access is denied.
2:24:52 AM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
2:24:52 AM #20 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.
2:24:52 AM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
2:24:52 AM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
2:24:52 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:25:58 AM #24 SPTI -1106 File SCSIPassThrough.cpp, Line 291
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x04a1ae00: Len xc
0x00 0A 00 00 00 00 00 00 00 1F 4C F0
2:25:58 AM #25 Text 0 File DVDPlusDualLayer.cpp, Line 646
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
2:25:58 AM #26 CDR -1106 File ThreadedTransferInterface.cpp, Line 1821
Power calibration error
F: SONY DVD RW DW-G120A
2:25:58 AM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1821
Could not perform start of Disc-at-once
2:25:58 AM #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/30/2005 11:08:51 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
********************SECOND LOG********************
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1
Recorder: <SONY DVD RW DW-G120A> Version: MYS4 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DW-G120A >Version: MYS4 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160812A nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : ST3160812A nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : SONY DVD RW DW-G120A nvatabus Port 0 ID 3 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-G120A F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 512MB (524828kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.9.2006
UDF/ISO compilation
2:06:07 AM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
2:06:07 AM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
2:06:07 AM #3 Text 0 File Isodoc.cpp, Line 6510
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:06:07 AM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
2:06:07 AM #5 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory
2:06:07 AM #6 Text 0 File Reader.cpp, Line 126
Reader running
2:06:07 AM #7 Text 0 File Writer.cpp, Line 123
Writer F: SONY DVD RW DW-G120A running
2:06:07 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
2:06:07 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
2:06:07 AM #10 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media
2:06:08 AM #11 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4102287 (911:37.12, 8012MB)
2:06:08 AM #12 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD DVD)
2:06:08 AM #13 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: SONY DVD RW DW-G120A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
2:06:08 AM #14 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:06:08 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4102288 (4102288) = #4102288/911:37.13
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4102288 blocks [F: SONY DVD RW DW-G120A]
--------------------------------------------------------------
2:06:08 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [F: SONY DVD RW DW-G120A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8401485824, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 4102288 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4102288 | 0 | 0x00
4102288 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:06:08 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:06:08 AM #18 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
2:06:08 AM #19 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.
2:06:08 AM #20 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
2:06:08 AM #21 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
2:06:08 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:06:57 AM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 291
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x04a8f000: Len x804
2:06:57 AM #24 Text 0 File DVDPlusDualLayer.cpp, Line 635
L0 Data Zone Capacity set to 2051312 (1F4CF0h, 4006MB) -> OK, confirmed setting
2:06:57 AM #25 CDR -1205 File DVDPlusDualLayer.cpp, Line 662
Burning Layer 1
2:06:57 AM #26 Text 0 File DVDPlusDualLayer.cpp, Line 672
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
2:06:57 AM #27 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 224CEF h (LBN: 1F4CEF h, 4006 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MKM.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 ...MKM.....001.@
25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7../c./c!#....
02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#.........
2:06:57 AM #28 Text 0 File DVDR.cpp, Line 6626
Drive: SONY DVD RW DW-G120A
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0
2:06:57 AM #29 CDR -1211 File DVDR.cpp, Line 6002
Book Type set to: DVD-ROM
2:06:57 AM #30 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes
2:07:35 AM #31 SPTI -1135 File SCSIPassThrough.cpp, Line 291
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 33 60 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0bbe0000: Len x10000
0x00 00 01 BA 44 05 3C 00 04 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 AF 6D C0 65 0E 52 B0 1E E0
0x2C A2 36 60 D6 E7 00 F9 51 8E C4 83 BF E7 9C 37
2:07:35 AM #32 CDR -1135 File Writer.cpp, Line 312
Write error
F: SONY DVD RW DW-G120A
2:07:35 AM #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
2:07:35 AM #34 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
2:07:35 AM #35 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
2:07:35 AM #36 Phase 129 File dlgbrnst.cpp, Line 1730
Generating DVD borders completed successfully
2:07:35 AM #37 Text 0 File DVDR.cpp, Line 6626
Drive: SONY DVD RW DW-G120A
Book Type request [LO], rev 3: DVD+R DL
Changing the Book Type was finished successfully, return code 0
2:07:35 AM #38 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/30/2005 11:08:51 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
********************END OF LOGS********************
Okay there you go, any help gratefuly received.
"Windows is a 32-bit extension to a 16-bit graphical shell for an 8-bit operating system originally coded for a 4-bit microprocessor by a 2-bit company that can't stand 1 bit of competition."
|
|
Nikita23
Newbie
|
19. December 2006 @ 17:24 |
Link to this message
|
I'm having a similar problem. Yet it's quite different.
I have a "_NEC DVD+RW ND-2100AD" i don't know much about it except it came with my computer.
I'm trying to burn a data disc.
I'm using Maxell discs. I tried using an older one which supports speeds of 1X 2.4X and 4X. I've also tried to use newer discs which also support 8x.
I've burned DVDs with the older discs before with Nero, Drag and drop, and iTunes.
Now, however, Nero gives me a power calibration error 3-4% into the burning process.
When I insert the blank disc Windows doesn't recognize it. It changes the drive name from "DVD/CD-RW Drive" to just "CD-Drive".
I bought a Maxell DVD Lens Cleaner but that didn't help.
HERES the twist: I burned a data DVD using iTunes. It doens't have the files I want, as it burned music to it, but it burned it nonetheless.
Any Ideas?
|
|
envidobi
Newbie
|
28. December 2006 @ 22:22 |
Link to this message
|
Hi All,
Having calibration problems too, but other weird problems. I havne't changed anything but my new CPU and additional RAM to my pc, and have 2 dvd drives: Plextor PX -760A and a LiteOn SOHW-1633S. Both worked fine until a few days ago when i went to burn and got these power calibration errors. My LiteOn works fine for cds (burning and reading) but won't burn or READ a DVD. My Plextor will read a DVD or cd but wont' burn either. I"ve changed power cords in teh back to both, sprayed air all inside both units, and updated firmware for both. I'm running out of options, and can't really them both being defective at the same time. Anyone have any suggestions? Here is a copy of the last burn i tried to do with my Plextor.
We are Borg
The Collective
1C80-[serial number removed by creaky]
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 6:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <PLEXTOR DVDR PX-760A> Version: 1.05 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 2 - 7.5.9.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L060J3 nvatabus Port 1 ID 0 DMA: Off
DiskPeripheral : WDC WD2000JB-00EVA0 nvatabus Port 1 ID 1 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-760A nvatabus Port 1 ID 2 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S nvatabus Port 1 ID 3 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom0
LITE-ON DVDRW SOHW-1633S G: CDRom1
SCSIVAX DVD/CD-ROM I: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096624kB)
Free physical memory: 1321MB (1353692kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.12.2006
ISO compilation
11:52:02 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:52:02 PM #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:52:02 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
11:52:02 PM #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
11:53:10 PM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1379631 (306:35.06, 2694MB)
11:53:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
11:53:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
11:53:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD R/RW, DVD R DL.)
Data to be written: 2,694 MB (2,825,486,336 bytes)
Space available on the disc: 1,794 MB (1,881,800,704 bytes)
11:53:10 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1379632 (1379632) = #1379632/306:35.7
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1379632 blocks [E: PLEXTOR DVDR PX-760A]
--------------------------------------------------------------
11:53:10 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [E: PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2825486336, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1379632 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1379632 | 0 | 0x00
1379632 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:53:10 PM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:53:10 PM #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
11:53:10 PM #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
11:53:10 PM #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
11:53:10 PM #15 Phase 28 File dlgbrnst.cpp, Line 1746
Speed measurement started
11:53:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:54:22 PM #17 Text 0 File WriterStatus.cpp, Line 113
<E: PLEXTOR DVDR PX-760A> start writing Lead-Out at LBA 1379632 (150D30h), length 0 blocks
11:54:23 PM #18 Phase 29 File dlgbrnst.cpp, Line 1695
Speed measurement completed: 27.6x (38,166 KB/s)
11:54:23 PM #19 Phase 32 File dlgbrnst.cpp, Line 1746
Simulation started at 8x (11,080 KB/s)
11:54:23 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:54:23 PM #21 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession
11:54:23 PM #22 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: Yes
11:54:23 PM #23 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:54:25 PM #24 Text 0 File Cdrdrv.cpp, Line 1292
23:54:25.132 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #25 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.788 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #26 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.803 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #27 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.819 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #28 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.835 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #29 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.850 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #30 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.866 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #31 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.882 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #32 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.897 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #33 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.913 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #34 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.928 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #35 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.944 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #36 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.960 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #37 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.960 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #38 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.975 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:27 PM #39 Text 0 File Cdrdrv.cpp, Line 1292
23:54:27.991 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #40 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.007 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #41 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.022 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #42 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.038 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #43 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.053 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #44 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.069 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #45 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.085 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #46 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.100 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #47 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.100 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #48 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.116 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #49 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.132 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #50 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.147 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #51 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.163 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #52 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.178 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #53 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.194 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #54 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.194 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #55 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.210 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #56 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.225 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #57 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.241 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #58 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.257 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #59 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.272 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #60 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.288 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #61 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.303 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #62 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.319 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #63 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.335 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #64 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.350 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #65 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.350 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #66 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.366 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #67 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.382 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #68 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.397 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #69 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.413 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #70 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.428 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #71 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.444 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #72 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.460 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #73 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.460 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #74 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.475 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #75 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.491 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #76 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.507 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #77 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.522 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #78 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.538 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #79 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.553 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #80 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.569 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #81 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.585 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #82 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.600 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #83 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.600 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #84 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.616 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #85 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.632 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #86 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.647 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #87 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.663 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #88 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.678 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #89 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.694 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #90 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.710 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #91 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.710 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #92 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.725 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #93 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.741 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #94 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.757 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #95 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.772 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #96 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.788 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #97 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.803 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #98 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.819 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #99 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.835 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #100 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.850 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #101 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.850 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #102 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.866 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #103 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.882 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #104 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.897 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #105 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.913 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #106 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.928 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #107 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.944 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #108 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.960 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #109 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.975 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #110 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.975 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:28 PM #111 Text 0 File Cdrdrv.cpp, Line 1292
23:54:28.991 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #112 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.007 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #113 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.022 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #114 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.038 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #115 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.053 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #116 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.069 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #117 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.085 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #118 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.100 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #119 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.116 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #120 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.116 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #121 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.132 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #122 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.147 - E: PLEXTOR DVDR PX-760A : Queue again later
11:54:29 PM #123 Text 0 File Cdrdrv.cpp, Line 1292
23:54:29.163 - E: PLEXTOR DVDR PX-760A : Queue again later
11:58:55 PM #124 Text 0 File WriterStatus.cpp, Line 113
<E: PLEXTOR DVDR PX-760A> start writing Lead-Out at LBA 1379632 (150D30h), length 0 blocks
11:58:55 PM #125 Text 0 File DVDR.cpp, Line 3434
EndDAO: Last written address was 1379631
11:58:57 PM #126 Phase 133 File dlgbrnst.cpp, Line 1746
Writing short lead-out
11:58:57 PM #127 Phase 33 File dlgbrnst.cpp, Line 1746
Simulation completed successfully at 8x (11,080 KB/s)
11:58:58 PM #128 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 8x (11,080 KB/s)
11:58:59 PM #129 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:58:59 PM #130 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession
11:58:59 PM #131 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: Yes
11:58:59 PM #132 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 180D2F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 180D40 h
Start sector number of the next Border-In: 18C4E0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 18 0D 40 00 18 C4 E0 - 00 00 00 00 00 00 00 00 ...@............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:59:01 PM #133 Text 0 File Cdrdrv.cpp, Line 1292
23:59:01.694 - E: PLEXTOR DVDR PX-760A : Queue again later
11:59:31 PM #134 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x22050080: Len x10000
0x6D 67 20 00 00 00 E4 E6 B1 00 03 00 00 00 00 80
0xC2 47 90 64 12 C7 01 80 7D 36 31 65 12 C7 01 00
0xF4 08 3E E5 2A C7 01 00 00 00 10 02 5F 5F 5F 31
11:59:31 PM #135 CDR -1106 File Writer.cpp, Line 299
Power calibration error
E: PLEXTOR DVDR PX-760A
11:59:31 PM #136 Text 0 File DVDR.cpp, Line 3434
EndDAO: Last written address was 31
11:59:32 PM #137 Phase 133 File dlgbrnst.cpp, Line 1746
Writing short lead-out
11:59:45 PM #138 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
11:59:45 PM #139 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
11:59:46 PM #140 CDR -1106 File WriterStatus.cpp, Line 162
Power calibration error
E: PLEXTOR DVDR PX-760A
11:59:46 PM #141 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
11:59:47 PM #142 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 8x (11,080 KB/s)
11:59:48 PM #143 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:59:48 PM #144 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
11:59:48 PM #145 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 3:00:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 5:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 3:00:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 12/19/2005 3:00:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ANy help will be greatly appreciated !!! :)
thanks!
This message has been edited since posting. Last time this message was edited on 28. December 2006 @ 22:25
|
|
Jinkazuya
Member
|
22. January 2007 @ 21:43 |
Link to this message
|
Will cheap quality media destroy your burner? I have used my burner to burn 50 times only with Nero 7 and now my burner always freezes when you insert an empty DVD disc. Having had it installed, the first time experience is that when you insert the disc into the burner, it will load for quite a while, more than 30 secs before you can burn your disc
Right now my burner is not working at all. Please help and tell me what happens. It happens to my second burner as well. The brand of DVD I use is Office Depot.
|
|
exxitar
Junior Member
|
23. January 2007 @ 13:11 |
Link to this message
|
|
office depot brand? well there is one of the problems use Tayo Yuden , Verbatim,maxell,ritek or phillips stay away from crap like generic stores staples and office depot and stay away from memorex they are really crapy media!
|
|
Jinkazuya
Member
|
23. January 2007 @ 14:08 |
Link to this message
|
|
My question is whether my burner is still usable? Or it is already dead and has to be replaced with a new one?
|
|
exxitar
Junior Member
|
23. January 2007 @ 14:31 |
Link to this message
|
|
try to play a movie that you did not burn then try to play a burned movie if they play the drive is ok maybe needs updating firware or need to use better media
|
|
gr8msvk
Suspended due to non-functional email address
|
28. January 2007 @ 09:16 |
Link to this message
|
|
Is there any relation between burning DVD+Rs and the power calibration error???
#include<life.h>
void risks(void)
|
|
gr8msvk
Suspended due to non-functional email address
|
28. January 2007 @ 09:19 |
Link to this message
|
Is there any relation between burning DVD+Rs and the power calibration error??? I too have a DW G120A. I'm using Nero 7.5 and Firmware is MYS6.
#include<life.h>
void risks(void)
|
|
Advertisement
|
|
|
|
roryoss
Junior Member
|
28. January 2007 @ 12:15 |
Link to this message
|
|
dont know but cheap +r's seems to have shut one of my drives down as far as dvd's only cds now on that drive!
|
|
