|
Post your Nero cd/dvd speed quality scans here
|
|
AfterDawn Addict
4 product reviews
|
22. March 2007 @ 17:48 |
Link to this message
|
|
@greensman.
HELLO!!!!!
working hard trust me.. cant ya tell im on here..lol
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
4 product reviews
|
23. March 2007 @ 02:34 |
Link to this message
|
ok just did everyones hero.very simple movie nothing trickey to it. very short movie. cant wait to watch it..lol
not bad for a short story huh. no compression at all.i only did the full screen version. im sure the wide screen had alot of added stuff. might just burn it also..
@greensman
im burning the 8x+r media but i did waiste another ty doing it. it starts our fine then gets anywhere from 6-14% into burn and i get the bad media error. i take out that disc and put in th esmae type and it burns fine.. i jhope this is still part of the learning process.i hope im not loseing disc for nothing.
|
AfterDawn Addict
|
23. March 2007 @ 02:55 |
Link to this message
|
Originally posted by cincyrob:
@greensman
im burning the 8x+r media but i did waiste another ty doing it. it starts our fine then gets anywhere from 6-14% into burn and i get the bad media error. i take out that disc and put in th esmae type and it burns fine.. i jhope this is still part of the learning process.i hope im not loseing disc for nothing.
@cincyrob,
What are you doing up so early? lol.
Man it still doesn't make much sense why that thing is eating TY's. IMHO, I would use the 16X Litey to burn those 8X YUDENS and stop "wasting" them. Not that the drive is defective but DANG loosing a precious YUDEN T02 is heart wrenching to me. :( I said this assuming the 16X Litey doesn't eat them too. If it does then you may have some bad discs. They're genuine and all, RIGHT?
btw did you use the quick scan feature on that scan? It looks like it. 205 total PIE's and NO PIF's, QS of 100 doesn't seem possible. :)
OH! Nice dumpster haul again!!!! I may need to visit just to get my own box of dvd cases. LOL. Wait a tick, I already received my box of goodies. hehehe.
....gm
|
AfterDawn Addict
4 product reviews
|
23. March 2007 @ 03:39 |
Link to this message
|
yea i used the quick scan on it..lol i never new it would do that, until last night i ve never tried it before..lol thats cheating..lol
as far as my 16xlitey it burns the 8x media fine. i just did the same movie on a 8x maxell and i didnt open smartburn like i had been. webt right into writing to disc with no problem. as far as the TY's go im allmost 100% sure they are real. i got them from meritline never had a problem with anything other than the real deal from them. i mean it could be possible that i might have a bad batch of TY's i will burn the next 5 or 6 onto the maxells and see if i have a problem with them... thinking of it i have only lost 1 of them and thats when i first got the 18x drive before i got smartburn.
hey i got 3 boys 8yo 4yo and a 2yo im up early every morning.lol my oldest is th eonly one is school so far..lol so im up with him getting him ready for school.. not really a excuse seeing i am naturally up at 6:00am anyway.. guess the army did that to me..lol
here is a scan a normal scan not that cheating way..lol
this is on the maxell. got the TY scanning now
edit to add scan
heres the 8x+r hubprintable TY
This message has been edited since posting. Last time this message was edited on 23. March 2007 @ 03:51
|
|
aabbccdd
Suspended permanently
|
23. March 2007 @ 08:08 |
Link to this message
|
|
great scan Rob , doesn't get better than that
and i am finally feeling better
|
AfterDawn Addict
4 product reviews
|
23. March 2007 @ 08:19 |
Link to this message
|
Originally posted by aabbccdd:
great scan Rob , doesn't get better than that
and i am finally feeling better
good to hear your doing better.
if your talking about that first one up there. nope thats cheating. i did a quick scan and got that.. look at the 2 under it those are the real deal...i honestly think it is impossible to get a 100% without cheating..lol
i decided to do blood diamond on one of the sony 16x+r(SD21). not a bad scan at all.
also did The Holiday on a 16xverb over burned @18x just for the heck of it, alot better scan than i thought it would be.
@lundy
i know i said not to burn that fast, but im just playing around. i havent tried to watch it yet that will be the real test.
whats suprising is this disc thats burnt at 18x has very low PIE's i would think it would be alot higher.
|
AfterDawn Addict
|
23. March 2007 @ 13:02 |
Link to this message
|
Originally posted by cincyrob:
whats suprising is this disc thats burnt at 18x has very low PIE's i would think it would be alot higher.
I'll show you mine since you showed me yours. LOL. I've got one somewhere that is terrible. I'll try some more later but I don't see the use besides that you can. hehehe. Good to see that baby doing something good for a change. I'd be pissed with all those TY's that it's "FRYING". Oops sorry didn't mean to bring up a sore subject. LOL. Maybe one of your friends will send you some to replace them. hehehe.
Back later with some scans. Short burns, good scans, and watch a perfect backup!! LOL
....gm
|
Moderator
1 product review
|
23. March 2007 @ 14:35 |
Link to this message
|
|
AfterDawn Addict
|
23. March 2007 @ 14:57 |
Link to this message
|
@LOCOENG,
Yep that's a good scan (burn) that Chewy shows us. As he stated that's about as good as it gets on a BENQ. How's it going buddy, well I hope. How's the railway system treatin ya???? :)
....gm
Got bored and did some 18X burns. One on the LH-18A1P and one on the Pioneer DVR-112L. ;-)
This is eragon on a TDK 003 burned at 18X with the LH_18A1P. It shows 6:17 on the shot of IMGBURN (really finished at 6:31 or something like that) but didn't do anything for almost 2 minutes before it started burning. This disc actually took less than 5 minutes to burn but the drive took forever to start for some reason. I guess getting ready for the media.
Shot of IMGBURN doing its thing. :)
Movie burned on a TYG03 burned at "18X" with the Pioneer DVR-112L. It actually didn't make it to 18X. For some reason the drive didn't like the speed and dropped down to 12X after reaching about 16.4X. It's a good high speed scan tho. :)
This message has been edited since posting. Last time this message was edited on 23. March 2007 @ 21:26
|
|
lundy1987
Newbie
|
24. March 2007 @ 12:05 |
Link to this message
|
oh...erm no lol, 1987 is my DOB haha :-)
right, just done a new scan using DVD Shrink insted of Nero...and look at the results, pi errors...thgers stil alot of them, but the max has dropped n the pi failures seem really good....
[IMG]http://img341.imageshack.us/img341/774/untitledxw2.jpg[/IMG]
|
|
lundy1987
Newbie
|
24. March 2007 @ 12:09 |
Link to this message
|
|
|
|
lundy1987
Newbie
|
24. March 2007 @ 13:38 |
Link to this message
|
|
oh and what software are people using to burn their dvd files or isos with?
Iv found that dvdshrink gives me better results but takes longer...
thanx
|
AfterDawn Addict
4 product reviews
|
24. March 2007 @ 15:27 |
Link to this message
|
@lundy
your problem is your disc you got there(in my opinion)those MCC03RG20's arent all that good. i know they are verbs, but not all that good need to get ya some good MCC003's orMCC004's
your PIF's are real good cant beat that. your total PIE's are a tad high for such short of a disc, but th emax isnt that bad cosidering the media...
Myself i use AnyDVD and clonedvd2 90% of the time.but i do use ripit4me the most if not useing clonedvd2. also imageburn is a good program to use if ya wanna burn ISO's.
|
|
lundy1987
Newbie
|
24. March 2007 @ 15:32 |
Link to this message
|
Originally posted by cincyrob:
@lundy
your problem is your disc you got there(in my opinion)those MCC03RG20's arent all that good. i know they are verbs, but not all that good need to get ya some good MCC003's orMCC004's
your PIF's are real good cant beat that. your total PIE's are a tad high for such short of a disc, but th emax isnt that bad cosidering the media...
Myself i use AnyDVD and clonedvd2 90% of the time.but i do use ripit4me the most if not useing clonedvd2. also imageburn is a good program to use if ya wanna burn ISO's.
ah well, jus bought 100 of them haha.
I know the total number of them is high but aslong as theyre under 200ish then it shouldnt cause ne jumps or pixalation on playback should it? thats all im really bothered about
|
Moderator
1 product review
|
24. March 2007 @ 15:48 |
Link to this message
|
Rectum is just as good as it gets...
|
|
lundy1987
Newbie
|
24. March 2007 @ 15:49 |
Link to this message
|
|
whats that?
|
Moderator
1 product review
|
24. March 2007 @ 16:12 |
Link to this message
|
|
Rectum...damn near killed 'em.
|
AfterDawn Addict
|
24. March 2007 @ 18:20 |
Link to this message
|
Actually.........Rectum hell.......damn near killed 'em. hehehe.
Nice scan there LOCO...:) Gotta like those 99's when you get them. Yeh thinking back on one of your previous posts there isn't to many scans with Nero CD.DVD Speed that show less than 100 PIF's but less than 300 is pretty good with a BENQ imo. :)
@Lundy,
The edit feature can be used to add something to a post if no-one has added since your last one. :) Just trying to be helpful.
And I use IMGBURN most of the time with ISO's and Nero Express with VIDEO_TS files. They both do a good job for what I use them for. I also use CloneDVD2 (to write ISO's) some of the time when I'm in a hurry and don't won't to wait on the ripped file and using another progie like DVDShrink or DVD-RB Pro.
IMHO IMGBURN is one of the best writers (and builders too) you can use. If you haven't tried it, you should just for something different. :)
On the discs that you are using, they are fine but not as coveted as some of the other media out there. The DVD+R version as cincyrob pointed out works nicely with most drives and of course TY DVD+R media is pretty good as well. I've never tried the YUDEN T03's but the YUDEN T02's are TOP NOTCH in my book. I've burned many of them and had VERY good luck. :) I like the book-type feature on DVD+R media as well. JM2C on that. ;-)
....gm
|
|
bigwill68
Suspended permanently
|
24. March 2007 @ 20:55 |
Link to this message
|
I guess i'll come in like cincyrob did with a good scan to lol..
naw this is really what happen below with the lity..
sorry 4 the double post just had to make ya lol..
pif was low..kept it disc to disc max at 8x's with CloneDVD & AnyDVD..
Done out of Here!
This message has been edited since posting. Last time this message was edited on 24. March 2007 @ 20:57
|
Moderator
1 product review
|
25. March 2007 @ 03:12 |
Link to this message
|
Quote:
Nice scan there LOCO...:) Gotta like those 99's when you get them. Yeh thinking back on one of your previous posts there isn't to many scans with Nero CD.DVD Speed that show less than 100 PIF's but less than 300 is pretty good with a BENQ imo. :)
I agree completely...still in search of the elusive less than though.
|
AfterDawn Addict
4 product reviews
|
25. March 2007 @ 03:29 |
Link to this message
|
wel lets see where do i start?
Unjust ya need to make room on that seat you got at the top, cause its gonna get a little tight up there with 2 of us up there..lol its not a 6 in the PIF's you got but its right next to it.
just did this one, burnt on the LH-18A1P at 8x on the hub printable 8x+r TY's. i didnt have smartburn on at first so yea i wasted another TY. but once i turned smartburn on i got this lovely little scan. nope i didnt cheat either regular scan @4x.
first 98 on a litey for me.
isnt she beautiful(oh still thinking im watching Miss America contest)is that really a contest?..lol
overall its a great burn. very low PIE's of course low PIF's even jitter test is in a good range.
@LOCO
is this low enough for ya??? lol
that scan on the benq you posted is a first for me. never seen a benq with less than 100, that i can remember. very nice scan.
gonna post this scan over in docTY's thread gotta show my buddy this TY scan..lol
|
|
lundy1987
Newbie
|
25. March 2007 @ 03:48 |
Link to this message
|
Ok.... now im confused, iv done two burns.....one was done on my dads pc using the same dvdrw (pioneer dvr111D, with the same f/w...1.23, on the same program, using the same verb disks, we are pretty muchy identical...my dad actually only has 34gb free, i have 60gb free...
as you can see (on the last scan i posted above) my dads pi errors only reach around 50ish....where as mine, stil hit about 150......i really dont understand why he is gettin much better scans than i am...
Oh and we are using the same f/w, ignore the 1.23 and 8.29, both scans were done on my pc, i just had the 8.29 one on my drive at the time i scanned my dads, but im getting the same results now iv reverted back to 1.23
here's my scan, compared to my dads burn below it...
mine
my dads
This message has been edited since posting. Last time this message was edited on 25. March 2007 @ 03:56
|
AfterDawn Addict
4 product reviews
|
25. March 2007 @ 03:57 |
Link to this message
|
|
is it the same as far as the spec's go? same type CPU, MEM, ect...
overall its still a good scan. i think your worried more about the PIE's than anything. you have to look at the whole scan and see what it tells you.granted the pie's ar a little high but they are under the 280 mark, thats where ya really need to worry when they get over 280.
|
|
lundy1987
Newbie
|
25. March 2007 @ 04:06 |
Link to this message
|
Originally posted by cincyrob:
is it the same as far as the spec's go? same type CPU, MEM, ect...
overall its still a good scan. i think your worried more about the PIE's than anything. you have to look at the whole scan and see what it tells you.granted the pie's ar a little high but they are under the 280 mark, thats where ya really need to worry when they get over 280.
Their pretty much identical, i may even have a ever so slightly better motherboard, so i dno what the prob is, its just annoying that he seems to get even better burns for unknown reasons
|
|
Advertisement
|
|
|
Moderator
1 product review
|
25. March 2007 @ 04:21 |
Link to this message
|
Quote:
@LOCO
is this low enough for ya??? lol
that scan on the benq you posted is a first for me. never seen a benq with less than 100, that i can remember. very nice scan.
gonna post this scan over in docTY's thread gotta show my buddy this TY scan..lol
Nice scan, but you are about a gig off the mark...most of the errors come between 4000 and 4400 MB's. LOL
|
