|
CECT Iphone P168
|
|
|
Jess123
Account closed as per user's own request
|
17. September 2007 @ 21:43 |
Link to this message
|
|
im a little confused on how to use the Xillisoft iPod Video Converter. explain what i have to do please. thank you
|
|
Advertisement
|
|
|
|
|
msmsms
Account closed as per user's own request
|
17. September 2007 @ 21:49 |
Link to this message
|
DO YOU CAN MAKE A ADAPTOR TO ME?
I PAY YOU
HOW MUCH YOU WANT?
Originally posted by chaz493:
hey there guys, since i have heard a lot of complaining about not being able to get good headphones for the CECT p168 i decided to provide a short walkthrough of how to change your phone headphones to any pair you want.
What you will need:
(1) pair of headphones you want to use
(1) pair of headphones that came with your phone
(1) soldering iron
(1) package of solder
(1) pair of wire snippers
Step one:
Pop open the plastic mic/button piece on your headphones that came with the phone. Then cut the wires so you still have some slack to work with.
Step two:
Cut the pair of headphones you want to use about half up from the headphone jack. Then strip the wires and keep them seperated. be sure to note which wires colors are together so you dont mix left and right up.
Step three:
warm up the soldering gun and get the solder ready. once warm, solder corresponding wires together. Like i said be sure to keep the appropriate wires paired together.
Final step:
Once soldered, put the wires inside the plastic mic/button case and snap it back together and there you go, now you have better headphones!
|
|
msmsms
Account closed as per user's own request
|
17. September 2007 @ 21:55 |
Link to this message
|
Originally posted by Jess123:
im a little confused on how to use the Xillisoft iPod Video Converter. explain what i have to do please. thank you
YOU MUST USE ''Xillisoft 3GP Converter'' IS BETTER
|
|
Jess123
Account closed as per user's own request
|
17. September 2007 @ 21:56 |
Link to this message
|
|
that is the one i downloaded i think
|
|
Jess123
Account closed as per user's own request
|
17. September 2007 @ 22:00 |
Link to this message
|
|
i meant what settings do i put the program on. im gunna use the free trial in the mean time.
|
|
Jess123
Account closed as per user's own request
|
17. September 2007 @ 22:17 |
Link to this message
|
|
i just purchsed it, taking forever to get the code
|
|
msmsms
Account closed as per user's own request
|
17. September 2007 @ 22:34 |
Link to this message
|
|
|
|
msmsms
Account closed as per user's own request
|
17. September 2007 @ 22:39 |
Link to this message
|
hi chaz493,
what i want is this:
do you can make to me?
i pay you by paypal or moneybookers.
add my msn: alfajeison@hotmail.com
i can send the cabes to you and you just make cause i can't.
This message has been edited since posting. Last time this message was edited on 17. September 2007 @ 22:47
|
|
jwhite197
Newbie
|
18. September 2007 @ 07:05 |
Link to this message
|
|
help can't setup internet with tmobile??
This message has been edited since posting. Last time this message was edited on 18. September 2007 @ 07:13
|
|
Jess123
Account closed as per user's own request
|
18. September 2007 @ 07:20 |
Link to this message
|
Originally posted by jwhite197:
help can't setup internet with tmobile??
1- Main Menu click on Entertainment then click on Services
2- Click on Data Account--> click on GPRS
3- Choose any account--> click on Edit
4- 1- Account Name
TMOBILE
2- APN
wap.voicestream.com
3- User Name
leave it blank
4- password
leave it blank
5- Auth. Type
Normal
CLICK ON DONE AND SAVE IT
CLICK ON BACK TWICE IT WILL TAKE YOU BACK TO SERVICES
5-Click on WAP --> click Settings--> click Edit Profile.
6- Choose any one on list then press ok-->Edit Profile
1- Rename Profile->(name it anything or u can name it T-mobile GPRS)
2-Homepage--> http://wap.myvoicestream.com
3-Data Account-->Select-->click on Gprs--> you will see the one we named earlier TMOBILE, select it and press OK
4- Connection Type
HTTP----then change the to Proxy: 216.155.165.050
and port to 8080
5- Username
leave it blank
6- Password
leave it blank
CLICK DONE AND SAVE IT--->CLICK ACTIVATE PROFILE AND SAVE
|
|
chaz493
Newbie
|
18. September 2007 @ 10:35 |
Link to this message
|
Originally posted by msmsms:
hi chaz493,
what i want is this:
do you can make to me?
i pay you by paypal or moneybookers.
add my msn: alfajeison@hotmail.com
i can send the cabes to you and you just make cause i can't.
The only way i could make that is if you sent me your headphones. Since i can't buy just the headphones anywhere i dont have a way to have the connectors i need without salvaging the supplied headphones.
|
|
Jess123
Account closed as per user's own request
|
18. September 2007 @ 11:12 |
Link to this message
|
|
hello everyone, i downloaded the movie thing so you can put movies on your CECT P168. if you would like me to convert a movie for you, feel free to send me an e-mail with the movie attached (if attaching a file that large works). jeanyus420@msn.com
if you're also looking for a bigger memory card, your best bet is going on ebay and looking for a 2gb SD memory card. will cost about $30. there probably about $100 in the cell phone stores, if not more. i bought a 512MB and it cost me almost $45. but thats in NY where they rip you off alot.
|
|
razot
Newbie
|
18. September 2007 @ 13:28 |
Link to this message
|
|
Hey guys, been reading the posts and i have some suggestions. As for the 2gb card, i walk into tigerdirect here in miami and got the 1gb for $21, the only reason i didn't get the 2gb card for $23 is because i wasn't sure if the phone will support it. As for the xilisoft, as someone has already stated download the software with the link already provided in this post. The individual also provides a "KEYGEN", for those not up on the lingo, this is a program which will generate you a serial number so you can use the full program with no limitations. As for me i converted them to 3gp. (be careful not to click 3gp2, that isn't supported). Like i said once converted just connect phone to pc and copy to video folder. I have about 6 movies on my phone. I'm still working on fine tuning the audio to amr, and some other things.
|
|
msmsms
Account closed as per user's own request
|
18. September 2007 @ 15:21 |
Link to this message
|
Originally posted by chaz493:
Originally posted by msmsms:
hi chaz493,
what i want is this:
do you can make to me?
i pay you by paypal or moneybookers.
add my msn: alfajeison@hotmail.com
i can send the cabes to you and you just make cause i can't.
The only way i could make that is if you sent me your headphones. Since i can't buy just the headphones anywhere i dont have a way to have the connectors i need without salvaging the supplied headphones.
please add my msn: alfajeison@hotmail.com
|
|
razot
Newbie
|
18. September 2007 @ 16:58 |
Link to this message
|
Just an update on the audio conversion to amr file extension. I used a123 audio to mp3 amr aac audio converter, and took a 5mb file to 489 kb. the sound quality was excellent. So that's an easy way of put a whole lot of music on the phone.
|
|
Epke
Newbie
|
18. September 2007 @ 23:30 |
Link to this message
|
Originally posted by chaz493:
hey there guys, since i have heard a lot of complaining about not being able to get good headphones for the CECT p168 i decided to provide a short walkthrough of how to change your phone headphones to any pair you want.
What you will need:
(1) pair of headphones you want to use
(1) pair of headphones that came with your phone
(1) soldering iron
(1) package of solder
(1) pair of wire snippers
Step one:
Pop open the plastic mic/button piece on your headphones that came with the phone. Then cut the wires so you still have some slack to work with.
Step two:
Cut the pair of headphones you want to use about half up from the headphone jack. Then strip the wires and keep them seperated. be sure to note which wires colors are together so you dont mix left and right up.
Step three:
warm up the soldering gun and get the solder ready. once warm, solder corresponding wires together. Like i said be sure to keep the appropriate wires paired together.
Final step:
Once soldered, put the wires inside the plastic mic/button case and snap it back together and there you go, now you have better headphones!
Can you make a clearer picture of step 1 cause I cant see now where you cut it and how the cables are in place?! Or add me on msn check PM
|
|
Epke
Newbie
|
18. September 2007 @ 23:35 |
Link to this message
|
|
hmm sorry isnt possible here! My msn: butie@msn.com
Thanks!
|
|
canut
Newbie
|
19. September 2007 @ 04:44 |
Link to this message
|
Questions :
1) According to me, an important information for users would be to know all the Bluetooth profiles supported by the CECT P168 iFone. It could help us to know which devices we could connect to it by Bluetooth.
Here is a list of Bluetooth profiles (taken from http://en.wikipedia.org/wiki/Bluetooth_profile). Kyle or somebody else, please quote all the profiles supported by the iFone.
By extension, I would be interested by a list of devices (Bluetooth USB keys, earplugs, access points, etc.) tested successfully by iFone current users.
For example, I have a D-Link DBT-900AP Bluetooth Access Point, connected by Ethernet on my DSL modem/router, and it would be glad for me to surf the internet using this DSL connexion instead of the GPRS connexion.
And I'd also like to use a stereo headset in order to replace the included wire earphones :
1 Advanced Audio Distribution Profile (A2DP)
2 Audio/Video Remote Control Profile (AVRCP)
3 Basic Imaging Profile (BIP)
4 Basic Printing Profile (BPP)
5 Common ISDN Access Profile (CIP)
6 Cordless Telephony Profile (CTP)
7 Device ID Profile (DID)
8 Dial-up Networking Profile (DUN)
9 Fax Profile (FAX)
10 File Transfer Profile (FTP)
11 General Audio/Video Distribution Profile (GAVDP)
12 Generic Access Profile (GAP)
13 Generic Object Exchange Profile (GOEP)
14 Hard Copy Cable Replacement Profile (HCRP)
15 Hands-Free Profile (HFP)
16 Human Interface Device Profile (HID)
17 Headset Profile (HSP)
18 Intercom Profile (ICP)
19 Object Push Profile (OPP)
20 Personal Area Networking Profile (PAN)
21 Phone Book Access Profile (PBAP)
22 Serial Port Profile (SPP)
23 Service Discovery Profile (SDAP)
24 SIM Access Profile (SAP, SIM)
25 Synchronisation Profile (SYNCH)
26 Video Distribution Profile (VDP)
27 Wireless Application Protocol Bearer (WAPB)
2)It would be great if one of iFone users would test all the supportable video and audio format and give us the feedback of each video format supported/unsupported. Who is candidate ?
3) I'd like to know if somebody has tested the iFone P168 with a Bluetooth GPS receiver and a JAVA map and navigation software such :
http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=51352
http://www.nav4all.com/site2/www.nav4all.com/index.php
http://www.mgmaps.com/
Thank you for your answers and feedbacks.
|
|
w8asa
Newbie
|
19. September 2007 @ 04:59 |
Link to this message
|
WHEW!! I got tired just reading your want list! That's quite a list you have there. I use my Motorola BT headset with my P168, and it seems to work quite good, except that every time I turn on the phone or the headset, I have to have them find each other again. I'll try to communicate between my Palm T|X and the P168 and let you all know how that turns out. Not sure what I'll be able to do, though.
Good luck in your search. My P168 says BT version 1.2.
|
|
canut
Newbie
|
19. September 2007 @ 05:09 |
Link to this message
|
I listed ALL the Bluetooth profiles available.
If I would keep only ones which interest me :
1 Advanced Audio Distribution Profile (A2DP) >> in order to use stereo headset for listenting MP3 files
8 Dial-up Networking Profile (DUN) >> in order to use the GPRS modem of the P168 with a laptop
9 Fax Profile (FAX) >> idem
10 File Transfer Profile (FTP) >> in order to load MP3/MP4 files from my laptom to the P168 without any USB cable
13 Generic Object Exchange Profile (GOEP) >> in order to swap Vcards with other mobile phones
15 Hands-Free Profile (HFP) >> enough explicite
17 Headset Profile (HSP) >> enough explicite
19 Object Push Profile (OPP) >> quite the same as GOEP I guess
20 Personal Area Networking Profile (PAN) >> in order tu browse the web with a Bluetooth Access Point such as the D-Link DBT-900AP which I own
21 Phone Book Access Profile (PBAP) >> enough explicite
22 Serial Port Profile (SPP) >> in order to connect a Bluetooth GPS receiver
|
|
Jess123
Account closed as per user's own request
|
19. September 2007 @ 05:22 |
Link to this message
|
|
yea im trying to figure out this GPS thing on the iphone rite now.. anyone know how to get i, if it is even available to us??
|
|
chaz493
Newbie
|
19. September 2007 @ 15:11 |
Link to this message
|
Originally posted by Epke:
hmm sorry isnt possible here! My msn: butie@msn.com
Thanks!
here is more detail, add me on msn if you need me. charliejjr@hotmail.com
|
|
Chizz401
Newbie
|
19. September 2007 @ 15:55 |
Link to this message
|
Guess What Guys and Gals. I got some info you may be interested. I have the English Manual, but im selling it for $10. You can py me through Pay Pal at streetsrus@mac.com I will mail you the manual to each and everyone of you
Also. My buddy has bought a PNK memory card with 2gb of memory and it is woking fine. I loaded all the videos and music what have you and it opened on the phone normal. I think im going to purchase the 4gb one. I dont see why not, no harm done
|
|
w8asa
Newbie
|
19. September 2007 @ 16:08 |
Link to this message
|
|
hahahahah There are links on here to get the manual for free.
|
|
Advertisement
|
|
|
|
Chizz401
Newbie
|
19. September 2007 @ 16:19 |
Link to this message
|
|
no one sent me the link so had to pay for t. I was just trying to make some money for making the copies and shipping it out. Thats all. so any where is this link, cause the ones posted here previously were not working. But other than that thanks for laughing, I know someone cares!
|
