|
Tutorial - Make Your Nintendo Wifi USB Connector A SoftAP
|
|
|
saint101
Junior Member
|
12. December 2008 @ 21:38 |
Link to this message
|
Originally posted by Negatory:
I have read through this entire tutorial but still have one problem. All of the steps have been properly completed and the access point is working (thank you) on both PSP and Ipod touch. However, It is not working on my DS. I have manually set up the IP to be one digit higher than the Router, set subnet mask same as router, set gateway and dns same as router. I have my SSID properly set also. But My DS cannot connect, I have to unplug the router and plug it back in just for my ds to pick up a signal which it soon loses. I have tried several different programs on the DS to connect with but none work.
in the asus wlan card setup program, go to config, encryption, and check the network authentication. i think it should be shared for it to work with the ds and maybe change the channel to 11
|
|
Advertisement
|
 |
|
|
|
kil8er
Newbie
|
19. December 2008 @ 17:51 |
Link to this message
|
I have got a problem. I used the soft AP for 2 weeks and all works fine. And suddenly this day he said during connection: error code 52101. I am sure I didn't change anything in the config settings etc. The only thing i did that day was trying Win2DS (thats a program of homebrew to control your computer with the ds) In the morning the wifi still works and in the afternoon it gives the error..
The computer has this day a update. You know a bar with: We will restart the computer to instal new updates in 5 minutes or something. So i restarted the computer.
Sorry for my bad english but i am from the netherlands ;)
Does annybody have the same problem with the wifi since 19-12?
I really don't know what to do...
greets,
Lucas
|
|
saint101
Junior Member
|
19. December 2008 @ 21:16 |
Link to this message
|
Originally posted by kil8er:
I have got a problem. I used the soft AP for 2 weeks and all works fine. And suddenly this day he said during connection: error code 52101. I am sure I didn't change anything in the config settings etc. The only thing i did that day was trying Win2DS (thats a program of homebrew to control your computer with the ds) In the morning the wifi still works and in the afternoon it gives the error..
The computer has this day a update. You know a bar with: We will restart the computer to instal new updates in 5 minutes or something. So i restarted the computer.
Sorry for my bad english but i am from the netherlands ;)
Does annybody have the same problem with the wifi since 19-12?
I really don't know what to do...
greets,
Lucas
nope no problems here, check network connections and make sure internet connection shairng is enabled on your internet line. it does occasionally stop sharing when something happens to the modem whether its restarted or updated
|
|
kil8er
Newbie
|
20. December 2008 @ 05:14 |
Link to this message
|
|
Thx for the fast reply! I haven't fix it yet but maybe the system has replace the original driver file.. (the file in C:/Windows/system32/drivers
I wil do th wolle turturial aggain ;)
|
|
penikka
Newbie
|
25. December 2008 @ 12:41 |
Link to this message
|
In Finnish, it says "Sovelluksen alustus epäonnistui (0x0000005). Lopeta sovellus valitsemalla OK."
I can't translate it, sorry :( But error is 0xc0000005. I did it with these instructions.
Edit: Oh, someone have the same problem..
Originally posted by billyboy7:
Hey, I'm trying to do the Nintendo wi-fi hack. I've followed the steps so far, I've got the modded drivers working, so my Nintendo wi-fi is now picked up as a Buffalo, but I'm having trouble on the next step, installing the ASUS control center, it crashes when it's run, saying "The application failed the initialize properly (0x0000005)". I've also tried installing the Buffalo Client Manager V, but at the end of the installation, it says "install failed" and when you try to run the program, it tells you the same thing. HELP!!
This message has been edited since posting. Last time this message was edited on 25. December 2008 @ 12:46
|
|
ominous54
Newbie
|
13. January 2009 @ 17:05 |
Link to this message
|
I am having trouble with step 4
I got the dialog asking if I want to use the Windows configuration utility or the ASUS one, I selected the option that uses ASUS one and disables the Windows one, but a wizard did not come up
i went through step 5 and got to 6
when i go to start > programs > ASUS Utility > WLAN card > Wireless settings, this message pops up
please help :(
|
|
bugz581
Suspended due to non-functional email address
|
21. January 2009 @ 01:59 |
Link to this message
|
|
uhhm i dont know if its too late or if anyone can help me anyways i managed to get everything right:D but when i go to my ipod touch i see my connection it lets me connect but when i go to the internet it doesnt connect:/ HELP PLEASE
|
|
saint101
Junior Member
|
21. January 2009 @ 03:55 |
Link to this message
|
Originally posted by bugz581:
uhhm i dont know if its too late or if anyone can help me anyways i managed to get everything right:D but when i go to my ipod touch i see my connection it lets me connect but when i go to the internet it doesnt connect:/ HELP PLEASE
make sure its on channel 11, and the connection is shared. also do you have any firewalls?
|
|
bugz581
Suspended due to non-functional email address
|
21. January 2009 @ 14:10 |
Link to this message
|
|
yeah i have firewalls i disabled them. when i go to my network connection one of them say shared and the wireless one says connected, and u lost me in channel 11? what is channel 11
|
|
saint101
Junior Member
|
22. January 2009 @ 03:33 |
Link to this message
|
Originally posted by bugz581:
yeah i have firewalls i disabled them. when i go to my network connection one of them say shared and the wireless one says connected, and u lost me in channel 11? what is channel 11
go to config in the ASUS WLAN card settings
Under Basic check the Channel and put it to 11
then go encryption and change Network Authentication to shared
and see what happens
|
|
bugz581
Suspended due to non-functional email address
|
22. January 2009 @ 16:05 |
Link to this message
|
|
encryption??
|
|
ryguy93
Suspended due to non-functional email address
|
23. January 2009 @ 16:12 |
Link to this message
|
If someone could help me it would be great!!! I got this working and it was great, but whenver i shutdown or restar my pc i have to reconfigure EVERYTHING!!! ive tried saving the settings in moblie manager and it does nto work!! plz hel if anyone could!! But whoever figured this out is a money saver!! i was gonna buy a new softap for my psp and wii and i found this post!!! anyways coudl you guys or someone help me!!
THANKS
|
|
gregpars1
Newbie
|
24. January 2009 @ 21:04 |
Link to this message
|
when I open up the ASUS WLAN Control Center, i only have 4 tabs under the config option. when I click on the soft ap tab i get the following message. access violation at address 0057403f in module 'wireless.exe'. read of address 027a3744. also in the soft ap tab my local area connection doesn't show up. i am using win xp sp2. under the properties of my local area connection, in the advanced tab, there is no internet connection sharing options at all.
Gregparsons
|
|
gregpars1
Newbie
|
24. January 2009 @ 21:26 |
Link to this message
|
also, it doesn't show the buffalo wli-u2-kg54-yb in the network connections page.the tabs that I have under config on the asus wlan card settings go as following. basic encryption soft ap and access control. do I need to update the software?
Gregparsons
|
|
saint101
Junior Member
|
25. January 2009 @ 06:13 |
Link to this message
|
Originally posted by ryguy93:
If someone could help me it would be great!!! I got this working and it was great, but whenver i shutdown or restar my pc i have to reconfigure EVERYTHING!!! ive tried saving the settings in moblie manager and it does nto work!! plz hel if anyone could!! But whoever figured this out is a money saver!! i was gonna buy a new softap for my psp and wii and i found this post!!! anyways coudl you guys or someone help me!!
THANKS
i think you have it set as to auto obtain IP instead of manually setting the IP address of the Application
go to network connections>wireless network connection (the buffalo adaptor)>richt click and click properties>under the general tab look for Internet Protocol and click properties
then make sure its "Use this IP address"
and put in 192.168.0.1 for ip address and
255.255.255.0 as subnet mask.
|
|
saint101
Junior Member
|
25. January 2009 @ 06:14 |
Link to this message
|
Originally posted by bugz581:
encryption??
follow the instructional video provided on the first page and you'll see what i mean
|
|
LucasBlat
Newbie
|
5. February 2009 @ 17:20 |
Link to this message
|
PLEASE HELP!
i did what the tutorial say to do, a long time ago...
and then, i canceled everything and decided to return to the nintendo official driver and software...
i was using the official one before using the tutorial one..
but now, the nintendo wi-fi is not working... the wii detect my pc, my pc detect wii, but the wii says:
Error Code:51340
Unable to connect to internet...
i tryied everything.. locking down firewall, deleting registry files, deleting asus drivers.. everything
so please, could someone help me???
thanks
|
|
saint101
Junior Member
|
6. February 2009 @ 04:11 |
Link to this message
|
Originally posted by LucasBlat:
PLEASE HELP!
i did what the tutorial say to do, a long time ago...
and then, i canceled everything and decided to return to the nintendo official driver and software...
i was using the official one before using the tutorial one..
but now, the nintendo wi-fi is not working... the wii detect my pc, my pc detect wii, but the wii says:
Error Code:51340
Unable to connect to internet...
i tryied everything.. locking down firewall, deleting registry files, deleting asus drivers.. everything
so please, could someone help me???
thanks
if the wii is recognised trying to connect to the pc then it might be on the wii's end. have you tried searching for the nintendo device on the wii and then it should test connection then ask to update. if it finds it but cant connect its on the pc end. Check network connections and see if the nintendo device is being shard a connection.
|
|
LucasBlat
Newbie
|
6. February 2009 @ 10:24 |
Link to this message
|
Originally posted by saint101:
Originally posted by LucasBlat:
PLEASE HELP!
i did what the tutorial say to do, a long time ago...
and then, i canceled everything and decided to return to the nintendo official driver and software...
i was using the official one before using the tutorial one..
but now, the nintendo wi-fi is not working... the wii detect my pc, my pc detect wii, but the wii says:
Error Code:51340
Unable to connect to internet...
i tryied everything.. locking down firewall, deleting registry files, deleting asus drivers.. everything
so please, could someone help me???
thanks
if the wii is recognised trying to connect to the pc then it might be on the wii's end. have you tried searching for the nintendo device on the wii and then it should test connection then ask to update. if it finds it but cant connect its on the pc end. Check network connections and see if the nintendo device is being shard a connection.
thanks for the answer... so, this is my setting for the connection, its in portuguese, you can understand, but if not, try translating in the web =D:
thank you!
|
|
saint101
Junior Member
|
6. February 2009 @ 10:40 |
Link to this message
|
i think i can see what the problem is. click on the other area connection, the active one and check to make sure that connection is being shared. the nintendo one looks fine as im aware
|
|
LucasBlat
Newbie
|
6. February 2009 @ 11:33 |
Link to this message
|
Originally posted by saint101:
i think i can see what the problem is. click on the other area connection, the active one and check to make sure that connection is being shared. the nintendo one looks fine as im aware
i didnt understand sorry.. could you write where to click, in engish, no problem, and then i see where in portuguese...
=D
|
|
LucasBlat
Newbie
|
6. February 2009 @ 11:37 |
Link to this message
|
Originally posted by saint101:
i think i can see what the problem is. click on the other area connection, the active one and check to make sure that connection is being shared. the nintendo one looks fine as im aware
i need to choose between conexao local or nintendo adapter conncetion to set as shared...
i can set only one as shared... and then i choosed the area connection... its now being shared, but the nintendo one not
This message has been edited since posting. Last time this message was edited on 6. February 2009 @ 13:35
|
|
seth_mjH
Inactive
|
6. February 2009 @ 18:48 |
Link to this message
|
I have done it all twice and both times i got my psp to pick up the connection when i scanned it said 100% but when i pressed test connection it said a connection could not be established.... so then i deleted it re-did it and got the same problem, so then i looked for the differences in what i did and the video, it pops up new hardware nintendo wifi connector, not the buffalo wlan thingy, i deleted all nintendo software first then downloaded the file it says on pg 1 then plugged in the connector, and my internet does not have the wireless picture it does on the video, i would show you but i forgot how to do that :( , if anyone could help me it would be grately appreciated
|
|
saint101
Junior Member
|
7. February 2009 @ 00:23 |
Link to this message
|
Originally posted by LucasBlat:
Originally posted by saint101:
i think i can see what the problem is. click on the other area connection, the active one and check to make sure that connection is being shared. the nintendo one looks fine as im aware
i need to choose between conexao local or nintendo adapter conncetion to set as shared...
i can set only one as shared... and then i choosed the area connection... its now being shared, but the nintendo one not
set the conexao local as shared and nintendo adapter as not being shared and try to see if the wii will connect to the net now
|
|
Advertisement
|
|
|
|
wifiluvr
Newbie
|
7. February 2009 @ 10:27 |
Link to this message
|
Whenever I try to open the asus program it says there is no wireless lan card inserted, the utility will open when the card is inserted. The usb adapter with the modded buffalo drivers are installed is plugged in. What should I do?
|
