Originally posted by wifiluvr:

---

make sure u manually configure the ip address make sure each device has a different ip address make sure u dont assign the same ip address on the comp. and make sure the ip address is 10 digits higher than the oneself on the comp.

---

Originally posted by wifiluvr:

---

make sure you made a folder with the extracted files. insert the usb connector and the "found new hardware wizard" will open click advanced installation then click dont search i will chose the drivers. then windows will search for the drivers find the extracted drivers and install them and there u go u have installed the drivers. if u need more help just ask

---

Originally posted by PSPvalent:

---

im stuck on question 8

i don't have the advance option in "local area connection"intel(pro)R/1000
i right click> properties>only option i have is change settings for firewall, network setup wizard.

when i untick ics i have both options to enable both wireless and local into properties>advance tab> check "allow users"
when i try to check on local area connection i get this error: an error occurred while internet connection sharing was being enabled

interenet connection sharing cannot be enabled A lan connection with the ip addresss that is required IP addressing.

when i apply sharing with wireless i get an error on my tray : windows - system error
conflict with ip adresses

can u help me solve this problem?

---

Originally posted by wifiluvr:

---

this has been working for a couple days now but this morning it stopped working i get 52100 on ds and 52131 on wii help please

---

Originally posted by wifiluvr:

---

already tried that

---

Originally posted by wifiluvr:

---

i can connect my ds now but not my wii i get 52231

---

Originally posted by PSPvalent:

---

im gonna brief what i posted

stuck on number 7
when i check a box that enables connection sharing i get an error:

An error has occurred while Internet connection sharing was being enabled.

internet connection connection sharing cannot be enabled.
A LAN connection is already configured with the ip address
that is required for automatic ip addressing.




OK so i fixed my problem and i did everything......i followed kj's video and set the same settings as him :l thing is i am slowly receiving packets..........then it stops

ethernet adapter local area connection
IP address: 192.168.0.2
Subnet mask: 255.255.255.0
default gatewat: 192.168.0.1

preferred dns server in internet(TCP/IP):192.168.0.1
"shared"
ethernet adapter wireless network connection 2
IP address:192.168.0.3
subnet mask: 255.255.255.0
dns server left blanked.

i added my mac address

---

Originally posted by Vuki:

---

Hello.

I have tried so many times trying to get this thing to work, but I am having no luck. I have read the instructions, followed the videos and nothing.

Some problems that I am having that are affecting it are these.
When I try to share my internet connection I get this error:

"An error occurred while Internet Connection Sharing was being enabled.

Internet Connection Sharing cannot be enabled.
A LAN connection is already configured with the IP address
that is requierd for automatic IP addressing."


Also when I start setting everything up as well, my internet cuts out on my PC. Is that supposed to happen? or can I use both at the same time.

Just an FYI, I am trying to get it to with my iPhone. I can see the WiFi connection, I just cant get a good single and its not sending any data. Also I have Windows XP Pro, SP3

Thanks,
Vuki

---