A NEWBIES GUIDE TO SETTING UP A DM500S FOR CARDSHARING
|
|
so_cool
Newbie
|
1. March 2011 @ 18:17 |
Link to this message
|
Originally posted by piopat: you can flash the dm800 via web browser .
I did not succeed in flashing by web browser because the oled in front is not coming on either the only sign of life is the yellow and green led on the lan port and the fan spinning inside the box any ideas thanks again
|
Advertisement
|
|
|
so_cool
Newbie
|
1. March 2011 @ 18:31 |
Link to this message
|
Originally posted by fintannl: the bootloader is another .nfi file as is the image itself. if you cannot lash the image you cannot flash the bootloader. when you power on the problem dm800 do you see any lighs internal within the box coming on.
no the only lights on are the yellow and green lights on the lan port at the back of the box and the fan is spinning inside the box
|
Senior Member
|
1. March 2011 @ 19:29 |
Link to this message
|
ok, issue is you need to jtag box, likewise with dm500
|
Senior Member
|
2. March 2011 @ 14:02 |
Link to this message
|
just confirm something please. when you power on the dm800 with the issue what exactly do you see on the display on the front of th box
|
so_cool
Newbie
|
2. March 2011 @ 17:02 |
Link to this message
|
Originally posted by fintannl: just confirm something please. when you power on the dm800 with the issue what exactly do you see on the display on the front of th box
when I turn on the box there is not sign of life in the front of the box at all. Please can you give me a link to the jtag box you recommended I checked the net and there were so many variations of it and I don't know what I'm looking for Thanks
|
Senior Member
|
2. March 2011 @ 17:36 |
Link to this message
|
in truth your dm800 is dead. have you no warranty
|
so_cool
Newbie
|
2. March 2011 @ 21:45 |
Link to this message
|
Originally posted by fintannl: in truth your dm800 is dead. have you no warranty
I got it from china directly I should be able to send it back I saw this could it be a solution to my problem
DM800 Clone Serial Flash Enforcer
i did send back my box but i know some people fix that by using serial flash enforcer
DM800 Clone Serial Flash Enforcer
'' DM800 Clone Serial Flash Enforcer
Made by and inconjuction with the Clone manufacturers!
Use if DreamUp will not connect to your 800 Clone.
read pdf files inside. ''
here is two solution
No ca found by 2nd stage loader
This can be done in 2 ways.
1) You have to have a working dreambox.
2) DM800_repair, you alter dreamup to be able to use greyed buttons.
Now for the first sollution.
1) Connect working dreambox DM600/DM800.
2) Open dreamup, press connect.
3) When dreambox is found by dreamup, insert Null-Modem cable in
the broken dreambox.
4) Press flash button, and chose a firmware.
5) The flash progress will probably hang, its OK.
6) Open dreamup again, connect the broken box, press connect.
7) If all went ok, you can now flash box again, (Use only serial
communication)
Now for the second sollution
1) Connect broken dreambox DM600/DM800
2) Open dreamup, press connect.
3) When you see second loader error popup, just press ok.
4) Open http://www.gsmsweden.com/forhike/sat...stage_pack.rar
5) Drag DM800_repair in front of dreamup, and press dream multimedia logo.
6) Now press the greyed Flash button, and chose firmware.
7) The flash progress will probably hang, its OK.
8) Open dreamup again, connect the broken box, press connect.
9) If all went ok, you can now flash box again, (Use only serial
communication)
Also what do you think is tha solution to the rpoblem with the dm500 it's a clone as well
working but cant flash with null or through web brouser
Thanks again
|
jackoooh
Member
|
3. March 2011 @ 07:11 |
Link to this message
|
Originally posted by so_cool: Originally posted by fintannl: in truth your dm800 is dead. have you no warranty
I got it from china directly I should be able to send it back I saw this could it be a solution to my problem
DM800 Clone Serial Flash Enforcer
i did send back my box but i know some people fix that by using serial flash enforcer
DM800 Clone Serial Flash Enforcer
'' DM800 Clone Serial Flash Enforcer
Made by and inconjuction with the Clone manufacturers!
Use if DreamUp will not connect to your 800 Clone.
read pdf files inside. ''
here is two solution
No ca found by 2nd stage loader
This can be done in 2 ways.
1) You have to have a working dreambox.
2) DM800_repair, you alter dreamup to be able to use greyed buttons.
Now for the first sollution.
1) Connect working dreambox DM600/DM800.
2) Open dreamup, press connect.
3) When dreambox is found by dreamup, insert Null-Modem cable in
the broken dreambox.
4) Press flash button, and chose a firmware.
5) The flash progress will probably hang, its OK.
6) Open dreamup again, connect the broken box, press connect.
7) If all went ok, you can now flash box again, (Use only serial
communication)
Now for the second sollution
1) Connect broken dreambox DM600/DM800
2) Open dreamup, press connect.
3) When you see second loader error popup, just press ok.
4) Open http://www.gsmsweden.com/forhike/sat...stage_pack.rar
5) Drag DM800_repair in front of dreamup, and press dream multimedia logo.
6) Now press the greyed Flash button, and chose firmware.
7) The flash progress will probably hang, its OK.
8) Open dreamup again, connect the broken box, press connect.
9) If all went ok, you can now flash box again, (Use only serial
communication)
Also what do you think is tha solution to the rpoblem with the dm500 it's a clone as well
working but cant flash with null or through web brouser
Thanks again
so_cool i got 5 dm800 from china and one of them would not work the problem was that the sim had come away from the board (bad solder)it should be in the bottom right of the box as you look at it from the front.
good luck.
jack..
j casey
|
fungames
Suspended due to non-functional email address
|
4. March 2011 @ 10:20 |
Link to this message
|
Hi guys i got a test c line from payserver in the uk all was good except for no sound on most of mtv chans(mtv+1/base/hits/dance etc.pic no sound) (mtv trax and mtv all have sound)i contacted the server and he says hes checking it out still no joy,even when i put my sly card in the dreambox 500 i get the same problem
|
Senior Member
|
4. March 2011 @ 11:08 |
Link to this message
|
when on an mtv channel or any channel with no sound press the audio button on the remote and you will see a few audio/language options choose english .if you unplug your box at night the audio settings will revert back ,you may be able to permanently set the audio option for these channels to english using dreambox edit.
|
so_cool
Newbie
|
4. March 2011 @ 15:30 |
Link to this message
|
Originally posted by fungames: Hi guys i got a test c line from payserver in the uk all was good except for no sound on most of mtv chans(mtv+1/base/hits/dance etc.pic no sound) (mtv trax and mtv all have sound)i contacted the server and he says hes checking it out still no joy,even when i put my sly card in the dreambox 500 i get the same problem
press the audio button and the select the last option 3 mpeg english you should then see running after it enjoy ok Piopat got there befor me
This message has been edited since posting. Last time this message was edited on 4. March 2011 @ 15:33
|
Senior Member
|
4. March 2011 @ 21:07 |
Link to this message
|
so cool dont worry mate its great to see newbies helping out ,thanks and keep helping and posting mate .thanks again mate talk soon.
|
Senior Member
|
4. March 2011 @ 22:33 |
Link to this message
|
well that sums it up. we now openly advise on pay server connections. goodnight and goodbye
|
Member
|
5. March 2011 @ 03:21 |
Link to this message
|
Originally posted by fintannl: novice, humming usually is related to your tv volume being too high and your dreambox volume being too low. so first thing to do is put dreambox volume to max and then gradually reduce your tv volume. humming should disappear
Thanks for that :-)
|
Member
|
5. March 2011 @ 03:34 |
Link to this message
|
Hi, I got two DM500S clones for my brother the other day. One is working perfectly but the other is having signal problems on certain channels. Example: Sly1 and Sly S*Case are pixelated with the 'BER' reading jumping all over the place. The dish is perfectly aligned and the other box has no issues using the same coax cable from the same dish.
I have brought the problem box home and have the same issue when I connect it to my own dish. Have re-flashed, re-scanned and the problem remains.
Just wondering if it could be a faulty tuner or if there something else which would cause this?
|
rooney123
Member
|
5. March 2011 @ 06:32 |
Link to this message
|
Originally posted by Novice99: Hi, I got two DM500S clones for my brother the other day. One is working perfectly but the other is having signal problems on certain channels. Example: Sly1 and Sly S*Case are pixelated with the 'BER' reading jumping all over the place. The dish is perfectly aligned and the other box has no issues using the same coax cable from the same dish.
I have brought the problem box home and have the same issue when I connect it to my own dish. Have re-flashed, re-scanned and the problem remains.
Just wondering if it could be a faulty tuner or if there something else which would cause this?
i had the same problem with one a while ago so i had to bin it..
|
Member
|
5. March 2011 @ 07:28 |
Link to this message
|
has any1 come across the image dreamup maxvar i got it today and you can adjust it so you can get a full epg
|
poput
Newbie
|
5. March 2011 @ 15:15 |
Link to this message
|
Hi all,
I am 100% newbie and don't know anything other than we can do card sharing and can watch channels free of cost. Is that true? What will it cost to setup all the system? Is it illegal and if yes how many percent chances are to get caught?
Which box is best to buy if you want good quality channels like Spy Skorts? What hardware do we need to set it up?
Sorry for simple and silly question. I hope someone can help me.
Thanks.
This message has been edited since posting. Last time this message was edited on 5. March 2011 @ 16:17
|
jhammer02
Junior Member
|
5. March 2011 @ 18:26 |
Link to this message
|
Originally posted by Dan1985: has any1 come across the image dreamup maxvar i got it today and you can adjust it so you can get a full epg
tell me about this Dan, how do we get the full epg (full list of programs list)?
|
Member
|
6. March 2011 @ 03:38 |
Link to this message
|
Originally posted by jhammer02: Originally posted by Dan1985: has any1 come across the image dreamup maxvar i got it today and you can adjust it so you can get a full epg
tell me about this Dan, how do we get the full epg (full list of programs list)?
well all you need is this image and then from the epg setting you can change the folder where the image is stored and then you can get a 3 day epg
|
Bazsutto
Newbie
|
6. March 2011 @ 03:43 |
Link to this message
|
Originally posted by poput: Hi all,
I am 100% newbie and don't know anything other than we can do card sharing and can watch channels free of cost. Is that true?
Not free, but a low monthly cost. all the info is at the start of this post (first 4-5 pages)
Quote: What will it cost to setup all the system?
Depends on your needs. Will you want HD? Do you want to record while watching another channel? Do you need to buy a dish or do you already have one?
Depending on the answer to these it can range from ?60 to ?300/?400.
Quote: Is it illegal and if yes how many percent chances are to get caught?
100% Legal if you only want Freeview channels (BBC, Ch4, ITV etc), but 100% Illegal if you go behond this like Sly premium channels.
Quote: Which box is best to buy if you want good quality channels like Spy Skorts? What hardware do we need to set it up?
Again depends on what your needs are. The DM500s is a great box for starting off with. Its cheap and is well supported.
|
Bazsutto
Newbie
|
6. March 2011 @ 03:50 |
Link to this message
|
Originally posted by Dan1985: Originally posted by jhammer02: Originally posted by Dan1985: has any1 come across the image dreamup maxvar i got it today and you can adjust it so you can get a full epg
tell me about this Dan, how do we get the full epg (full list of programs list)?
well all you need is this image and then from the epg setting you can change the folder where the image is stored and then you can get a 3 day epg
Is this for a DM500. Sounds interesting. Have you ever used WeekEPG 3.2b? if so, is it better?
|
Member
|
6. March 2011 @ 03:51 |
Link to this message
|
Originally posted by Bazsutto: Originally posted by Dan1985: Originally posted by jhammer02: Originally posted by Dan1985: has any1 come across the image dreamup maxvar i got it today and you can adjust it so you can get a full epg
tell me about this Dan, how do we get the full epg (full list of programs list)?
well all you need is this image and then from the epg setting you can change the folder where the image is stored and then you can get a 3 day epg
Is this for a DM500. Sounds interesting. Have you ever used WeekEPG 3.2b? if so, is it better?
no havent used that where would i get it to try
|
Bazsutto
Newbie
|
6. March 2011 @ 04:01 |
Link to this message
|
Originally posted by Dan1985: Originally posted by Bazsutto: Originally posted by Dan1985: Originally posted by jhammer02: Originally posted by Dan1985: has any1 come across the image dreamup maxvar i got it today and you can adjust it so you can get a full epg
tell me about this Dan, how do we get the full epg (full list of programs list)?
well all you need is this image and then from the epg setting you can change the folder where the image is stored and then you can get a 3 day epg
Is this for a DM500. Sounds interesting. Have you ever used WeekEPG 3.2b? if so, is it better?
no havent used that where would i get it to try
Works on Darkstar II image. Can store upto 7-days. However, wont store locally on box, have mine using PC's hard drive. Its far from perfect, bud does give you full listings tru yellow button. If you are interested, just google "Weekepg 3.2b"
|
Advertisement
|
|
|
Member
|
6. March 2011 @ 04:04 |
Link to this message
|
Originally posted by Bazsutto: Originally posted by Dan1985: Originally posted by Bazsutto: Originally posted by Dan1985: Originally posted by jhammer02: Originally posted by Dan1985: has any1 come across the image dreamup maxvar i got it today and you can adjust it so you can get a full epg
tell me about this Dan, how do we get the full epg (full list of programs list)?
well all you need is this image and then from the epg setting you can change the folder where the image is stored and then you can get a 3 day epg
Is this for a DM500. Sounds interesting. Have you ever used WeekEPG 3.2b? if so, is it better?
no havent used that where would i get it to try
Works on Darkstar II image. Can store upto 7-days. However, wont store locally on box, have mine using PC's hard drive. Its far from perfect, bud does give you full listings tru yellow button. If you are interested, just google "Weekepg 3.2b"
i see well this uses the box to store the data
|