|
A NEWBIES GUIDE TO SETTING UP A DM500S FOR CARDSHARING
|
|
|
manumax
Junior Member
|
21. February 2011 @ 16:24 |
Link to this message
|
Mate if your 800 is sim 201 bl 76 you can flash it with the new dream elite 1.0 hd image it has all the cams in it and the ccam config folder
OK thanks Rooney123 will give it a go, gotta be easier than faffing about with no cccams in the image...
Cheers
Thanks to all for their help so far.......
|
|
Advertisement
|
 |
|
|
|
manumax
Junior Member
|
22. February 2011 @ 17:04 |
Link to this message
|
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
|
|
so_cool
Newbie
|
22. February 2011 @ 19:01 |
Link to this message
|
Hi guys I got a new DM 800 hd clone today and my tv screen went green about 1 min after I switched it on I was just about to flash it so I carried on, I held down the power botton unplugged the power, pluged it again and noting it would not even boot, noting is showing on the oled screen in front the only sign of life is the yellow and green leds around the Ethernet port.
I usually flash from browser but that's no going to work now question is can I flash the box with null cableand dream up, if anyone has experienced this before any advice thanks
This message has been edited since posting. Last time this message was edited on 22. February 2011 @ 19:02
|
|
rooney123
Member
|
23. February 2011 @ 03:25 |
Link to this message
|
Originally posted by manumax:
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
Did you not try the dream elite image..The cams are in download extra??
|
|
rooney123
Member
|
23. February 2011 @ 03:43 |
Link to this message
|
Originally posted by so_cool:
Hi guys I got a new DM 800 hd clone today and my tv screen went green about 1 min after I switched it on I was just about to flash it so I carried on, I held down the power botton unplugged the power, pluged it again and noting it would not even boot, noting is showing on the oled screen in front the only sign of life is the yellow and green leds around the Ethernet port.
I usually flash from browser but that's no going to work now question is can I flash the box with null cableand dream up, if anyone has experienced this before any advice thanks
You can also flash a dm 800 with dream up and a network cable connected i find easier than a web browser..just open up dream up with null cable and then connect your network cable in dream up tick use network put in ip address of computer and in remote box put ip of dream box hit connect it will ask to turn on dream box and it will load flash loader and you will get box in network rather than serial mode the hit flash pick your image and it will take two mins or so..Or a null cable on its own takes nearly and hour so i would do this way if you are unsure
Edit message
|
|
9161lee
Member
|
23. February 2011 @ 11:17 |
Link to this message
|
Originally posted by manumax:
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
hey manumax
i have a dm800hd
what bootloader do you have? and which sim?
if you have a clone with sim 201 and bootloader 76d
you can use
http://www.dm800sim2.com/sim2/nabilosat/content/61/20091115/194.html
same image i was advised to use
worked great for me
i can try and help you
had same problem
leanne x
This message has been edited since posting. Last time this message was edited on 23. February 2011 @ 11:27
|
|
manumax
Junior Member
|
23. February 2011 @ 14:24 |
Link to this message
|
Originally posted by rooney123:
Originally posted by manumax:
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
Did you not try the dream elite image..The cams are in download extra??
Yes mate flashed the box but it would not boot said error only for DM7025 so gonna try the image Leanne suggested....
Thanks
|
|
rooney123
Member
|
23. February 2011 @ 14:29 |
Link to this message
|
Originally posted by manumax:
Originally posted by rooney123:
Originally posted by manumax:
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
Did you not try the dream elite image..The cams are in download extra??
Yes mate flashed the box but it would not boot said error only for DM7025 so gonna try the image Leanne suggested....
Thanks
Ok well you flash it the wrong image..Any way that image that leanne suggested is similar
|
|
9161lee
Member
|
23. February 2011 @ 15:01 |
Link to this message
|
|
its not the wrong image for dm800hd its perfect
or rather it is for mine
pat gave it to me
leanne x
|
|
rooney123
Member
|
23. February 2011 @ 15:07 |
Link to this message
|
Originally posted by 9161lee:
its not the wrong image for dm800hd its perfect
or rather it is for mine
pat gave it to me
leanne x
No dear i am taking about that image..I was talking about the image manumax tried x
|
Member
|
23. February 2011 @ 15:59 |
Link to this message
|
|
ok i have another problem guys i have a dm500 and for some reason everytime i plug it into my downstairs tv it knocks off the satellite menus and cant view any channels but when plugged into any other tv its all fine
|
|
9161lee
Member
|
23. February 2011 @ 16:11 |
Link to this message
|
Originally posted by rooney123:
Originally posted by 9161lee:
its not the wrong image for dm800hd its perfect
or rather it is for mine
pat gave it to me
leanne x
No dear i am taking about that image..I was talking about the image manumax tried x
ok no probs sorry 4 misunderstanding
leanne x
|
|
manumax
Junior Member
|
23. February 2011 @ 16:23 |
Link to this message
|
Originally posted by 9161lee:
Originally posted by manumax:
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
hey manumax
i have a dm800hd
what bootloader do you have? and which sim?
if you have a clone with sim 201 and bootloader 76d
you can use
http://www.dm800sim2.com/sim2/nabilosat/content/61/20091115/194.html
same image i was advised to use
worked great for me
i can try and help you
had same problem
leanne x
I loaded on the image but it is the same I must be really thick and doing something wrong as the only option is common interface...
oh well the dustbin men are due tomorrow its not worth the stress have been messing about with this box for nearly a week now... I really want to get this going but it is doing my head in
:( GRRRRRRRRRRRRRRR
|
Member
|
23. February 2011 @ 16:31 |
Link to this message
|
Originally posted by manumax:
Originally posted by 9161lee:
Originally posted by manumax:
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
hey manumax
i have a dm800hd
what bootloader do you have? and which sim?
if you have a clone with sim 201 and bootloader 76d
you can use
http://www.dm800sim2.com/sim2/nabilosat/content/61/20091115/194.html
same image i was advised to use
worked great for me
i can try and help you
had same problem
leanne x
I loaded on the image but it is the same I must be really thick and doing something wrong as the only option is common interface...
oh well the dustbin men are due tomorrow its not worth the stress have been messing about with this box for nearly a week now... I really want to get this going but it is doing my head in
:( GRRRRRRRRRRRRRRR
that would be a loss of alot of money
|
Member
|
23. February 2011 @ 16:31 |
Link to this message
|
Hi Guys
My question is DM800HD related so appologies in advance for posting here.
I have just upgraded from DM500s to DM800HD (clone). I am wondering if there is an addon I can manually install on the DM800 which is similar to the CCCam PPanel on the DM500s?
My DM800HD has Enigma 2 blackhole installed but I understand that Gemini have stopped providing CCCam addons for download.
|
|
rooney123
Member
|
23. February 2011 @ 16:33 |
Link to this message
|
Originally posted by manumax:
Originally posted by 9161lee:
Originally posted by manumax:
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
hey manumax
i have a dm800hd
what bootloader do you have? and which sim?
if you have a clone with sim 201 and bootloader 76d
you can use
http://www.dm800sim2.com/sim2/nabilosat/content/61/20091115/194.html
same image i was advised to use
worked great for me
i can try and help you
had same problem
leanne x
I loaded on the image but it is the same I must be really thick and doing something wrong as the only option is common interface...
oh well the dustbin men are due tomorrow its not worth the stress have been messing about with this box for nearly a week now... I really want to get this going but it is doing my head in
:( GRRRRRRRRRRRRRRR
Mate you will only get common interface until you load cams
|
|
manumax
Junior Member
|
23. February 2011 @ 16:42 |
Link to this message
|
Originally posted by rooney123:
Originally posted by manumax:
Originally posted by 9161lee:
Originally posted by manumax:
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
hey manumax
i have a dm800hd
what bootloader do you have? and which sim?
if you have a clone with sim 201 and bootloader 76d
you can use
http://www.dm800sim2.com/sim2/nabilosat/content/61/20091115/194.html
same image i was advised to use
worked great for me
i can try and help you
had same problem
leanne x
I loaded on the image but it is the same I must be really thick and doing something wrong as the only option is common interface...
oh well the dustbin men are due tomorrow its not worth the stress have been messing about with this box for nearly a week now... I really want to get this going but it is doing my head in
:( GRRRRRRRRRRRRRRR
Mate you will only get common interface until you load cams
Thats the problem am I using wrong cams have tried several all the same wont work - do the files go to var/tmp? if so in what format as a zippeed ipkg or a bin?
|
|
rooney123
Member
|
23. February 2011 @ 16:44 |
Link to this message
|
Originally posted by Novice99:
Hi Guys
My question is DM800HD related so appologies in advance for posting here.
I have just upgraded from DM500s to DM800HD (clone). I am wondering if there is an addon I can manually install on the DM800 which is similar to the CCCam PPanel on the DM500s?
My DM800HD has Enigma 2 blackhole installed but I understand that Gemini have stopped providing CCCam addons for download.
Press yellow button and then green this will get you into addons
|
|
9161lee
Member
|
23. February 2011 @ 16:44 |
Link to this message
|
Originally posted by Novice99:
Hi Guys
My question is DM800HD related so appologies in advance for posting here.
I have just upgraded from DM500s to DM800HD (clone). I am wondering if there is an addon I can manually install on the DM800 which is similar to the CCCam PPanel on the DM500s?
My DM800HD has Enigma 2 blackhole installed but I understand that Gemini have stopped providing CCCam addons for download.
yes they have use the image i suggested for manumax
works a treat for me
leanne x
|
|
9161lee
Member
|
23. February 2011 @ 16:48 |
Link to this message
|
Originally posted by rooney123:
Originally posted by manumax:
Originally posted by 9161lee:
Originally posted by manumax:
Well its been days now I am at a total loss tried various images didn't work went back to gemini all ok exept cannot set up the cccam
all that comes up is common interface and cannot load the cccam files
am well fed up
:(
hey manumax
i have a dm800hd
what bootloader do you have? and which sim?
if you have a clone with sim 201 and bootloader 76d
you can use
http://www.dm800sim2.com/sim2/nabilosat/content/61/20091115/194.html
same image i was advised to use
worked great for me
i can try and help you
had same problem
leanne x
I loaded on the image but it is the same I must be really thick and doing something wrong as the only option is common interface...
oh well the dustbin men are due tomorrow its not worth the stress have been messing about with this box for nearly a week now... I really want to get this going but it is doing my head in
:( GRRRRRRRRRRRRRRR
Mate you will only get common interface until you load cams
hi
if u press green then yellow for addons then addons download manager then nabilo e2 image cams and then choose ccam 2.1.3 or ccam 2.1.4 the complete versions it will download your ccam, you need to do it this way as your cams arent automatically there after flashing
its so easy once you know how
leanne x
|
Senior Member
|
23. February 2011 @ 16:51 |
Link to this message
|
|
manumax is the nabilo image on the box now ?.try these instructions.
Exit all menus and press the Green button (Nabilosat Green Panel) on your remote control, then the yellow button (Addons Manager)
Now select Addons Download Manager -> Nabilo E2 Image Cams -> It will connect to the internet and download a list of Cccam files to choose from.
From the list, select the CCcam file with the highest version number, at the moment Cccam_2.14 is the latest version.
Press OK to select the package, then the Green button to download, then install it.
Once it has finished installing, it will see a Installed OK message. Close all open screens.
Press the Blue button, then select the left or right arrow to select Cccam_2.14.
Once selected, press the OK button. It will then start the selected Cam.
|
Senior Member
|
23. February 2011 @ 16:52 |
Link to this message
|
|
manumax is the nabilo image on the box now ?.try these instructions.
Exit all menus and press the Green button (Nabilosat Green Panel) on your remote control, then the yellow button (Addons Manager)
Now select Addons Download Manager -> Nabilo E2 Image Cams -> It will connect to the internet and download a list of Cccam files to choose from.
From the list, select the CCcam file with the highest version number, at the moment Cccam_2.14 is the latest version.
Press OK to select the package, then the Green button to download, then install it.
Once it has finished installing, it will see a Installed OK message. Close all open screens.
Press the Blue button, then select the left or right arrow to select Cccam_2.14.
Once selected, press the OK button. It will then start the selected Cam.
|
|
manumax
Junior Member
|
23. February 2011 @ 17:12 |
Link to this message
|
Originally posted by piopat:
manumax is the nabilo image on the box now ?.try these instructions.
Exit all menus and press the Green button (Nabilosat Green Panel) on your remote control, then the yellow button (Addons Manager)
Now select Addons Download Manager -> Nabilo E2 Image Cams -> It will connect to the internet and download a list of Cccam files to choose from.
From the list, select the CCcam file with the highest version number, at the moment Cccam_2.14 is the latest version.
Press OK to select the package, then the Green button to download, then install it.
Once it has finished installing, it will see a Installed OK message. Close all open screens.
Press the Blue button, then select the left or right arrow to select Cccam_2.14.
Once selected, press the OK button. It will then start the selected Cam.
Hi This is not working either if I press it takes me to plugins there is no addons download manager - if I go to blue panel settings 1 and addonsI get options to install from server there is a list but nothing aboutdownload manager or nabilo???
|
Member
|
23. February 2011 @ 17:16 |
Link to this message
|
Originally posted by 9161lee:
Originally posted by Novice99:
Hi Guys
My question is DM800HD related so appologies in advance for posting here.
I have just upgraded from DM500s to DM800HD (clone). I am wondering if there is an addon I can manually install on the DM800 which is similar to the CCCam PPanel on the DM500s?
My DM800HD has Enigma 2 blackhole installed but I understand that Gemini have stopped providing CCCam addons for download.
yes they have use the image i suggested for manumax
works a treat for me
leanne x
Thanks Leanne
|
|
Advertisement
|
|
|
|
9161lee
Member
|
23. February 2011 @ 17:20 |
Link to this message
|
Originally posted by manumax:
Originally posted by piopat:
manumax is the nabilo image on the box now ?.try these instructions.
Exit all menus and press the Green button (Nabilosat Green Panel) on your remote control, then the yellow button (Addons Manager)
Now select Addons Download Manager -> Nabilo E2 Image Cams -> It will connect to the internet and download a list of Cccam files to choose from.
From the list, select the CCcam file with the highest version number, at the moment Cccam_2.14 is the latest version.
Press OK to select the package, then the Green button to download, then install it.
Once it has finished installing, it will see a Installed OK message. Close all open screens.
Press the Blue button, then select the left or right arrow to select Cccam_2.14.
Once selected, press the OK button. It will then start the selected Cam.
Hi This is not working either if I press it takes me to plugins there is no addons download manager - if I go to blue panel settings 1 and addonsI get options to install from server there is a list but nothing aboutdownload manager or nabilo???
hello if pat isnt around i maybe able to help
did you install the nabilosat image?
if so you should be seeing nabilosat download manager
when you come out of menus and first press green button on remote control what exactly do you see?
when you go into green button you should see an option for a yellow button just called addons, every dreambox is different so it will say different things but for dm800hd this is what should be there
leanne x
This message has been edited since posting. Last time this message was edited on 23. February 2011 @ 17:32
|
