Originally posted by clairb:

---

LATEST FILE RELEASED 26/05/2010

GUINNESS-1.00 for Ireland / Uk

CARLING-1.00 for UK. THERE SEEMS TO BE A PROB WITH THIS FILE SO HAS BEEN REMOVED PLEASE USE THE GUINNESS FILE FOR BOTH IRL AND THE UK

PLEASE FOLLOW THE INSTRUCTION CAREFULLY IF YOU DONT WANT DEAD BOXES WHEN LOADING THE FIRMWARE!

Load your file downloaded on to your usb memory stick, making sure its formatted to fat 32 first, then power off the box and insert the memory stick into the back usb socket on your box, then power on your box.

And From the main menu go to Utility, and then press the right arrow button, and select usb from the right hand side, you will see the Guinness/carling file then press ok on it and make sure to select SW+ALL DATA UPDATE..

The machine will update and restart (don't pull your memory stick out at this point)

you now need to scan your channels, NO SPLITTERS ON YOUR INCOMING CABLE WHEN DOING YOUR SCAN,then go to installation press the right arrow button again and go down to AUTO CABLE SEARCH.

all you need to do now is pick your symbol rate. (Your Area)

The symbol rate determines your area for example N*l is 6887, the other numbers are 6952 for Telepe** and EXc&w.

When you have selected your area go to start scan.

once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.

Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT

After you have your box up and running you can switch it off and take out the usb device !!

GUINNESS-1.00 and CARLING-1.00 files : Ethernet Enable sw(SV Combo) in Ireland and also fine to works pat** sw in UK

Follow as below procedure go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.

To use with LAN connection.

Menu - Option -networks - net application - select type ?Ustream(UK) or Istream(Irealnd) - ok)

If they have 16:9 TV please follow up ? Option -> OSD Setup -> Screen Format

IRISH / Uk FILE HERE

READ_ ME_FIRST

---

Originally posted by hooter007:

---

Originally posted by riocht:

---

Cheers, thanks for the reply. Guinness works fine now. Is there a sat channel list available for download, bouquets etc?

---

sorry some1 that is familar with the sat side can prob shed some light on that

---

Originally posted by clairb:

---

LATEST FILE RELEASED 26/05/2010

GUINNESS-1.00 for Ireland / Uk

CARLING-1.00 for UK. THERE SEEMS TO BE A PROB WITH THIS FILE SO HAS BEEN REMOVED PLEASE USE THE GUINNESS FILE FOR BOTH IRL AND THE UK

PLEASE FOLLOW THE INSTRUCTION CAREFULLY IF YOU DONT WANT DEAD BOXES WHEN LOADING THE FIRMWARE!

Load your file downloaded on to your usb memory stick, making sure its formatted to fat 32 first, then power off the box and insert the memory stick into the back usb socket on your box, then power on your box.

And From the main menu go to Utility, and then press the right arrow button, and select usb from the right hand side, you will see the Guinness/carling file then press ok on it and make sure to select SW+ALL DATA UPDATE..

The machine will update and restart (don't pull your memory stick out at this point)

you now need to scan your channels, NO SPLITTERS ON YOUR INCOMING CABLE WHEN DOING YOUR SCAN,then go to installation press the right arrow button again and go down to AUTO CABLE SEARCH.

all you need to do now is pick your symbol rate. (Your Area)

The symbol rate determines your area for example N*l is 6887, the other numbers are 6952 for Telepe** and EXc&w.

When you have selected your area go to start scan.

once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.

Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT

After you have your box up and running you can switch it off and take out the usb device !!

GUINNESS-1.00 and CARLING-1.00 files : Ethernet Enable sw(SV Combo) in Ireland and also fine to works pat** sw in UK

Follow as below procedure go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.

To use with LAN connection.

Menu - Option -networks - net application - select type “Ustream(UK) or Istream(Irealnd) - ok)

If they have 16:9 TV please follow up “ Option -> OSD Setup -> Screen Format

IRISH FILE HERE

READ_ ME_FIRST

---

Originally posted by e45:

---

why not try scanning the box yourself on the sat

---

Originally posted by hooter007:

---

alredy a post about this

---

Originally posted by e45:

---

ya be waiting a long time

---