Originally posted by topcat96:

---

Please be advised that if you upgrade your A750 with the 17052010 firmware, make sure your IConnect is powered OFF when doing the new channel scan.

Only reconnect it and power it back up again once you have a TV signal displyed on the TV (Usually channel 0000).

Once you power up the IConnect, it should take over the A750 and downlod a major update from the internet. This is normal and should be allowed to proceed (display shows on both the TV and the A750). Once the A750 display shows the word SUCC it is complete and you may now use your IConnect in the manner in which it was designed. Happy viewing!

If you get the above wrong, the IConnect will sit there and only display 2 green LED's (power and connection). If this is the case, re-read the above and you have to start from the beginning (re-flash)

Points to note:

Faster channel decryption
Faster fetching of codes (I noted every 2, 5 and 10 seconds on a repeating cycle)
More responsive remote control
New menu item which will eventually show website traffic (not implemented yet?)

To those reading this associated with the Kryptview and IConnect, I personally thank you and ask if the DW800 HD box is to be IConnect capable too (answer via PM if you wish to remain anon) >:o)

---

Originally posted by hooter007:

---

as far as i know the dw800 has everything inside the box or perhaph im mistaking the a780 instead

---

Originally posted by e45:

---

no that is not what im saying you are welcome to post what you want what i am saying is he is confusing this himself unless he has the box in his hands to see what he needs then there is no point guess in what he will and wont need

let him come back when he has the box then we can guide he better from there me thinks anyway

---

Originally posted by mantas42:

---

---

Originally posted by Dubfella:

---

Originally posted by MICKAH:

---

not sure, as what you need the router to do is very little in terms of a data stream, could be were u are based or living, as you say an apartment, could be a weak signal perhaps, you would need to conctact your provider and ask them that question

---

ja think its anything to do with the fact that im running the dongle off an old slow laptop? ive the ethernet lead running straight to the sv6 box on network sharing....

---

Originally posted by bobeey3k:

---

Originally posted by Dubfella:

---

Originally posted by MICKAH:

---

not sure, as what you need the router to do is very little in terms of a data stream, could be were u are based or living, as you say an apartment, could be a weak signal perhaps, you would need to conctact your provider and ask them that question

---

ja think its anything to do with the fact that im running the dongle off an old slow laptop? ive the ethernet lead running straight to the sv6 box on network sharing....

---

Not sure if this might help but Vod*fon* hav a new wireless router (Huawei hg556a) that can be used with a 3g device... intended for those who want wireless around the house but cannot get landline BB or for those who have landline BB and are having issues, they can simply connect 3g device and away they go....also has 4 LAN ports...

---

Originally posted by mantas42:

---

ok I'll wait cheers mate theres a little life left in my sv3 lol

---

Originally posted by hooter007:

---

i wonder if the rest of the box companies eg: Eurovox..ect will follow in the footsteps of kryptview and starview or are they just going to let themselves go bust!!

---

Originally posted by hooter007:

---

Originally posted by mantas42:

---

ok I'll wait cheers mate theres a little life left in my sv3 lol

---

mantas when replying click reply under the persons name you are replying to,
also use the reply at the end of the page
because it can get a bit confusing when you reply under the last person who replyed under person before him ect...
now im not having a go at you for this (by all means post the way you want to post)
just a friendly heads up mate
also enjoy your sv box till the end

---

Originally posted by gerb68:

---

Thanx again e45.

I heard Krypview had have good support. Nice to see there supporting legacy equipment.

---

Originally posted by hooter007:

---

Originally posted by gerb68:

---

Thanx again e45.

I heard Kryptview had have good support. Nice to see they are supporting legacy equipment.

---

correction on 1 of your words

---