Originally posted by Dan1985:

---

Originally posted by garycocs:

---

Long time since I've been up here, goes to show the DM500s have been behaving themselves.

Have just got a problem with a couple of the boxes.

So every so often after a hard power off I have to reflash the boxes, not a problem.

Then find the channels, not a problem.

Then upload the CCcam.cfg shown below

---

SERVER LISTEN PORT : 12000 

C: 192.168.1.113 12000 root114 root114

---

The server CCcam.cfg is shown also

---

SERVER LISTEN PORT : 12000

SMARTCARD CLOCK FREQUENCY : /dev/sci0 3430000

BOXKEY : /dev/sci0 xx xx xx xx

F: root101 root101 3 1 1 { 0:0:3 }

F: root100 root100 3 1 1 { 0:0:3 }

F: root101 root101 3 1 1 { 0:0:3 }

F: root110 root110 3 1 1 { 0:0:3 }

F: root111 root111 3 1 1 { 0:0:3 }

F: root113 root113 3 1 1 { 0:0:3 }

F: root114 root114 3 1 1 { 0:0:3 }

F: root115 root115 3 1 1 { 0:0:3 }

---

So now I've only one slave box working on the home plug network (114)

The other ones can get online (check the forums through the box) but say the master is offline?

I thought it might be the plugs but I've swapped the working slave for a non working slave and the working one stays working.

Any suggestions lads??

Thanks
Gary

---

---

Originally posted by Dan1985:

---

think i sorted it

---

Originally posted by Hubabuba:

---

jhammer02.

Use home plugs, connect one into router, and the other into your 600.

these units come in pairs, and can be had from maplins or peats, or you can get them on ebay, I bought a pair for 80euro, and another on ebay for 50 including postage, so look around before buying.I think this the info you are looking for.

---

Originally posted by piopat:

---

well the router should give all your devices a seperate ip (and your router will also have its own ip) so its strange that you have network ok .you can get a dvi to hdmi cable should work fine.

---

Originally posted by fintannl:

---

openmedia wifi bridge

---

Originally posted by balcee:

---

Evening folks

Hope you are all well. I've been spending this evening setting up two dreambox 500s boxes on my home LAN. The server box is online, with correct cccam config file, etc. The problem occurs with the second one upstairs.

It powers on fine, and I can see the Gemini page on the TV screen. BUT as soon as I connect the ethernet cable, my Motorola VM modem starts flashing (send/recieve) and is unable to reconnect to Internet until I disconnect the cable from the client dreambox.

What is going on?

---