|
|
|
Anydvd & Clondvd2
|
|
|
hollandoh
Member
|
22. November 2005 @ 11:46 |
Link to this message
|
|
Today I went to burn a few new movies. I opend Anydvd and the Clonedvd2 as I always do. I put the DVD into the gsa-5163 external and went throu the steps when I came to the step were you check yhe vts-o in clone, I checked it and then hit OK. Well a box came up and This is what it had to say.
Clone dvd2.This dvd is copy-ptotected.
Clone dvd2 is not for use in copying protected dvds.
Many DVDs are css encoded, which is a copy-protection file system. If a DVD is CSS encoded, then the reader will refuse to access the disc. Therfore Clone DVD2 cannot read the file and make a copy!
To anyone who can help me with this,I will be greatful. I have burned over a 100 dvds with these two programs without any trouble and don`t know what is wrong.I think maybe something is wrong with ANYDVD, but cannot say what.Can someone please HELP. You can read the statement above and maybe come up with a soulation..
Thanks Andy
dell 8400,intel pentium 4 processor 540(3.2GHz)w/HT and 1MB cache. 1GB ddr2 sdram at 400MHz,256MB Nvidia GeForce 6800 Graphics Card.250GB Serial ATA Hard Drive (7200rpm)philips dvd+-rw dvd8631, Works great!intel Pro 1000 intergrated PCI NIC Card,Sound Blaster Live!24 bit Audio 100/db/dolby.16xdvd-rom and 16xdvd+/-rw,dell 5650 5.1 Surround Sound Speakers with Subwoofer, 19 in 1905fp,ultra sharp lcd screen
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
22. November 2005 @ 11:50 |
Link to this message
|
|
|
|
hollandoh
Member
|
22. November 2005 @ 12:00 |
Link to this message
|
@ireland,
Yes I have the new V555.1, You say to unstall and resintall the AnyDVD. Or CloneDVD2. Is it AnyDVD that is not doing it`s job.
Thanks Andy
dell 8400,intel pentium 4 processor 540(3.2GHz)w/HT and 1MB cache. 1GB ddr2 sdram at 400MHz,256MB Nvidia GeForce 6800 Graphics Card.250GB Serial ATA Hard Drive (7200rpm)philips dvd+-rw dvd8631, Works great!intel Pro 1000 intergrated PCI NIC Card,Sound Blaster Live!24 bit Audio 100/db/dolby.16xdvd-rom and 16xdvd+/-rw,dell 5650 5.1 Surround Sound Speakers with Subwoofer, 19 in 1905fp,ultra sharp lcd screen
|
AfterDawn Addict
|
22. November 2005 @ 12:06 |
Link to this message
|
the info i got was from cdfreaks,they said uninstall AnyDVD and reinstall..also if you have DVD43 installed AnyDVD will have a problem.
|
Newbie
|
22. November 2005 @ 12:08 |
Link to this message
|
Start AnyDVD, insert the disc to be copied, allow AnyDVD time to remove the copy protection then start CloneDVD. I've used both numerous times without any problem. If that doesn't work uninstall AnyDVD, reboot, then re-install.
|
|
hollandoh
Member
|
22. November 2005 @ 12:12 |
Link to this message
|
@ireland,
No I donot have DVD43 installed. I will do what you say and will let you know the results.
Andy
dell 8400,intel pentium 4 processor 540(3.2GHz)w/HT and 1MB cache. 1GB ddr2 sdram at 400MHz,256MB Nvidia GeForce 6800 Graphics Card.250GB Serial ATA Hard Drive (7200rpm)philips dvd+-rw dvd8631, Works great!intel Pro 1000 intergrated PCI NIC Card,Sound Blaster Live!24 bit Audio 100/db/dolby.16xdvd-rom and 16xdvd+/-rw,dell 5650 5.1 Surround Sound Speakers with Subwoofer, 19 in 1905fp,ultra sharp lcd screen
|
|
hollandoh
Member
|
22. November 2005 @ 19:11 |
Link to this message
|
|
@ireland,
Well I got every thing back to normal, I unstaled,and reinstaled,and every thing is good,sorry it took so long. I was busy burnnnning, HA HA . The one thing I noticed was ,now it wants me to put the new version in. 5.5.5.1.Wasn`t that what cause the break down, or Was I the only one to have some trouble. Is it OK to install the new version..
Andy
dell 8400,intel pentium 4 processor 540(3.2GHz)w/HT and 1MB cache. 1GB ddr2 sdram at 400MHz,256MB Nvidia GeForce 6800 Graphics Card.250GB Serial ATA Hard Drive (7200rpm)philips dvd+-rw dvd8631, Works great!intel Pro 1000 intergrated PCI NIC Card,Sound Blaster Live!24 bit Audio 100/db/dolby.16xdvd-rom and 16xdvd+/-rw,dell 5650 5.1 Surround Sound Speakers with Subwoofer, 19 in 1905fp,ultra sharp lcd screen
|
AfterDawn Addict
|
23. November 2005 @ 07:25 |
Link to this message
|
|
I have the new version installed and it works fine. What version do you have installed now?
|
|
hollandoh
Member
|
23. November 2005 @ 08:44 |
Link to this message
|
@9mmruger1,
Well now I have 555.1, and it is working. I did my burns last night with the old one, but changed this morning. Let me ask you one more question, This might be the wrong section to ask in,but here it goes. I have a External LG-GSA-5163D,hooked up to my laptop,I set the booktype and burn a few movies,every thing comes out alright. When I get done and take a break,and shut the computer down.A couple hours latter, I turn it on and burn, Well I then get a coaster.I would like to Know >Do I have to set the BOOKTYPE on the External whenever I re-start my computer, Or is there something I can do to keep the booktype set to DVD-ROM.and not have to worry about makeing coasters anymore. I have done this Three times now and want to stop getting Coasters. Do I have to reset the booktype every time on the laptop,or is there a way to set it and not have to worry about makeing coasters???
Thank You
Andy
dell 8400,intel pentium 4 processor 540(3.2GHz)w/HT and 1MB cache. 1GB ddr2 sdram at 400MHz,256MB Nvidia GeForce 6800 Graphics Card.250GB Serial ATA Hard Drive (7200rpm)philips dvd+-rw dvd8631, Works great!intel Pro 1000 intergrated PCI NIC Card,Sound Blaster Live!24 bit Audio 100/db/dolby.16xdvd-rom and 16xdvd+/-rw,dell 5650 5.1 Surround Sound Speakers with Subwoofer, 19 in 1905fp,ultra sharp lcd screen
|
|
aabbccdd
Suspended permanently
|
25. November 2005 @ 21:59 |
Link to this message
|
yes there should be a way to do that ,i dont have an LG so iam not sure how to do it might look on there website or call there tech. support to see
also when you get an email from slysoft for a update of AnyDVD you just install it OVER your current verison
|
|
hollandoh
Member
|
26. November 2005 @ 04:52 |
Link to this message
|
|
@aabbccdd,
Thanks, I never thought about going to the LG,site.
Andy
dell 8400,intel pentium 4 processor 540(3.2GHz)w/HT and 1MB cache. 1GB ddr2 sdram at 400MHz,256MB Nvidia GeForce 6800 Graphics Card.250GB Serial ATA Hard Drive (7200rpm)philips dvd+-rw dvd8631, Works great!intel Pro 1000 intergrated PCI NIC Card,Sound Blaster Live!24 bit Audio 100/db/dolby.16xdvd-rom and 16xdvd+/-rw,dell 5650 5.1 Surround Sound Speakers with Subwoofer, 19 in 1905fp,ultra sharp lcd screen
|
AfterDawn Addict
|
26. November 2005 @ 05:08 |
Link to this message
|
|
@hollandoh
I have not found a way to permanently set the booktype on my LG as of yet. What I do is put a blank media in the DVDRW drive and open DVDdecrypter. I wait til decrypter recognizes the disc and then use the change booktype method. This will keep the booktype set to DVD-ROM until I reboot the system.
If done, the LG burner does not care which program I am burning with, decrypter, imgburn, or CloneDVD2, they booktype all burned media to DVD-ROM until a reboot. After a reboot, I have to reset the booktype again. I have just made this process one of my burning steps.
|
|
Advertisement
|
|
|
|
hollandoh
Member
|
26. November 2005 @ 10:33 |
Link to this message
|
@9mmruger9,
Hey thanks alot, Now that I know what to do ,I will make it a step to do each time I reboot,and know that it is set to DVD-ROM. I talked to a LG rep,and he said that googel says to booktype,with Nero and it will stay perament,but I asked about a EXTERNAL, and he said he didn`t know for sure. Well I will do like you and ,after every reboot ,just reset it...
Thanks A lot Guy...
Andy...
dell 8400,intel pentium 4 processor 540(3.2GHz)w/HT and 1MB cache. 1GB ddr2 sdram at 400MHz,256MB Nvidia GeForce 6800 Graphics Card.250GB Serial ATA Hard Drive (7200rpm)philips dvd+-rw dvd8631, Works great!intel Pro 1000 intergrated PCI NIC Card,Sound Blaster Live!24 bit Audio 100/db/dolby.16xdvd-rom and 16xdvd+/-rw,dell 5650 5.1 Surround Sound Speakers with Subwoofer, 19 in 1905fp,ultra sharp lcd screen
|
|
