|
Anydvd and Clonedvd2 Too Good
|
|
|
Wildrat
Suspended due to non-functional email address
|
29. March 2006 @ 12:57 |
Link to this message
|
|
You need to run msconfg, and go to startup and uncheck some of the things you do not want to start at startup. Also your antivirus software can slow your machine down. I run Avast and it'll make ya think you have an old Commodore 64 it's so slow. With Avast you just need to do some tweaking to get your machine going again.
Wildrat,
Beige Computer, with a couple of buttons.
This message has been edited since posting. Last time this message was edited on 29. March 2006 @ 12:58
|
|
Advertisement
|
|
|
|
Senior Member
|
30. March 2006 @ 10:18 |
Link to this message
|
|
When I do try to delete some stuff from startup, I get error messages.
So much stuff is abbreviated, that I don't know whaT IS What.
AMD Phenom II X4 3.2Ghz
16GB memory
1TB HDD
AnyDVD & CloneDVD
|
|
Wildrat
Suspended due to non-functional email address
|
30. March 2006 @ 10:24 |
Link to this message
|
|
go up toward the top of the table and expand the columns by putting your pointer on the dividing lines and single click and hold and move the line to the right to expand the column or to the left to decrease it's size. By doing this it will allow the words that are abbreviated to become full words. Hope this makes sense to ya.
Wildrat,
Beige Computer, with a couple of buttons.
|
Senior Member
|
30. March 2006 @ 21:18 |
Link to this message
|
|
wildrat
thanks, that seemed to help.
AMD Phenom II X4 3.2Ghz
16GB memory
1TB HDD
AnyDVD & CloneDVD
|
Member
|
30. March 2006 @ 21:53 |
Link to this message
|
If you are not sure what the stuff in msconfig, startup does, you can check them out at
http://www.sysinfo.org/startuplist.php
it tells you which application they run for, whether you need to leave them on or not and whether they are harmful.
hope this helps
This message has been edited since posting. Last time this message was edited on 30. March 2006 @ 21:54
|
|
aabbccdd
Suspended permanently
|
30. March 2006 @ 22:45 |
Link to this message
|
|
dabig it wont hurt to deselect all reboot and the stuff your PC has to have will start .have you been doing a disc cleanup and defragging at least once a week? this is a must if your ripping lots of dvds ,with your system you should be able to transcode and burn a dvd in 20 to 25 mins. at the most
|
|
Wildrat
Suspended due to non-functional email address
|
31. March 2006 @ 04:28 |
Link to this message
|
|
DaBig25,
Your Welcome!
Wildrat,
Beige Computer, with a couple of buttons.
|
Senior Member
|
31. March 2006 @ 06:25 |
Link to this message
|
|
Also Thanks
rafigold & aabbccdd
Yes, I do disk clean up & defrag about every 2 weeks.
I only back up a dvd 1 or 2 times a week....
AMD Phenom II X4 3.2Ghz
16GB memory
1TB HDD
AnyDVD & CloneDVD
|
AfterDawn Addict
4 product reviews
|
31. March 2006 @ 12:47 |
Link to this message
|
|
king kong
|
Senior Member
|
31. March 2006 @ 12:56 |
Link to this message
|
|
Will be getting king kong next week
AMD Phenom II X4 3.2Ghz
16GB memory
1TB HDD
AnyDVD & CloneDVD
|
|
Wildrat
Suspended due to non-functional email address
|
31. March 2006 @ 14:50 |
Link to this message
|
|
When netflix gets it, I'll have King Kong also.
Wildrat,
Beige Computer, with a couple of buttons.
|
|
CModder
Newbie
|
31. March 2006 @ 16:16 |
Link to this message
|
Anything under 10 minutes is a waste of time takes me 5-10 minutes using AnyDVD,CloneDVD works great well worth buying it :)
CoolerMaster ATC 110 (Street Fighter)
P4 3.4Ghz 800 FSB (NorthWood Core)
Zalman CNPS9500 LED HeatSink
Intel Motherboard D875PBZLK FMB 1.5
Corsair XMS Extreme Memory 2GB DDR PC3200 4x512
PC Power & Cooling Turbo Cool 510 Ultra SLI with PFC
2x WD Raptor Hd 75 gig 8 meg cache 10,000 rpm
Plextor PX-740A 16X 8x Dual Layer
Plextor PX-PREMIUM/SW 52x 8meg Cache
Sound Blaster X-Fi XtremeMusic
Evga Geforce 6800 Ultra 256 Megs
Klipsch ProMedia Ultra 5.1 Speakers
Sony 21 Inch CRT Trinitron Flat Screen Monitor
|
|
dganch50
Newbie
|
5. April 2006 @ 09:50 |
Link to this message
|
|
THANKS,
i am currently using a trial version of clone DVD2 and any DVD and am considering buying them. before i tried these trial versions i was frustrated trying to burn DVDs. in the last couple of days i have read comments and suggestions from all of you and i have to say THANKS!! all of you have helped me so much.
|
AfterDawn Addict
|
5. April 2006 @ 09:53 |
Link to this message
|
@dganch50
Glad to hear you like these programs, I feel it is the best money I ever spent on a progam. Don't forget that the ripper is included in AnyDVD and works very well. Used it for Narnia and it cleaned up the files great.
|
|
dani21p
Suspended due to non-functional email address
|
5. April 2006 @ 10:22 |
Link to this message
|
Ok Im having a big problem Im hoping you guys might be able to help I purchase AnyDVD and Clonedvd2 about 6 months ago and let me tell you it works great I have been able to make copys of my own dvds greatly never any flaws and thats unsing any type of media on my Pioneer Dvr-109, the media I have used is Verbatim. Memorex,sony, and even hp media. Well just recently i dont know what happen but My CloneDVD will not burn on any Media it keeps Saying Media Error, or Please insert a blank disc this is after it ips to hard drive then begins to burn into media. Know i do know for sure its not the Nedia since it has burn this media Before, Im currently using Sony DVDR and Memorex DVDR. Sometimes when it does go through its burns into disc but as it is ready to finalize the disc and say its inserting buffers it freezes and doesnt say disc was completed sucessfully, My drive at this point is completely frozen and wont even open so then I have reboot. Dont understand I have not done anything diff so why would this be happening some help would be appreciate it, The movies it has done this to me with is Derailed, Mine yours, and ours, and Domino, .
|
|
Wildrat
Suspended due to non-functional email address
|
5. April 2006 @ 11:19 |
Link to this message
|
|
Try updating the firmware to your burner
Wildrat,
Beige Computer, with a couple of buttons.
|
|
aabbccdd
Suspended permanently
|
5. April 2006 @ 21:02 |
Link to this message
|
and few thing you can do..
uninstall and reinstall BOTH CloneDVD 2 and AnyDVD BUT make sure you do a clean reinstall meaning do a disc cleanup defragging and cleaning your registry ,reboot your machine then reinstall the latest verison of both programs.
then make sure your firmware is up to date
use better media memorex is a big NO NO ,Taiyo Yuden or Verbatim or stuff that codes out as TY is the media to use.
also make sur you dont have programs that conflit with AnyDVD which would be DVD43,any drag to disc programs like roxio or Nero INCD theses can cause all kinds of problems
|
|
Wildrat
Suspended due to non-functional email address
|
6. April 2006 @ 09:54 |
Link to this message
|
|
Is TDK media anygood?
Wildrat,
Beige Computer, with a couple of buttons.
|
|
aabbccdd
Suspended permanently
|
6. April 2006 @ 10:01 |
Link to this message
|
NO ,its usally crap media ,if your going to buy at a store look for Fujifilm or Sony DVD+R 8x thats (Made In Japen)important<<< theses will code out as Taiyo Yuden or get Verbatim
|
|
Wildrat
Suspended due to non-functional email address
|
6. April 2006 @ 17:22 |
Link to this message
|
|
I bought a new burner from the local computer shop a couple of days ago. It is a Liteonit brand, It is an internal drive. I installed it in my other computer so I could free up my laptop, and the other computer has more memory and a new 200 gig hd. I can't get the piece of krap to work. Anyone have any ideas, besides removing it, bring it back, go to another store and get a drive that the name is familiar?
Wildrat,
Beige Computer, with a couple of buttons.
|
|
aabbccdd
Suspended permanently
|
6. April 2006 @ 21:54 |
Link to this message
|
|
Lite-On are great drives. do you see it in "My Computer" ?? and is it hooked up right check your connections
|
|
Wildrat
Suspended due to non-functional email address
|
7. April 2006 @ 02:52 |
Link to this message
|
|
Yes it is in my computers, I've tried burning with it, it gets about half done and quits writing stating their is a media error, I have tried it on different speeds. When the computer is first booted anydvd says it cannot read from the drive for a variety of possible reasons, 1. it's an rpc2 drive, whatever that means,2.it has not been assigned a region code, and a couple of other reasons. Anydvd also popped up a couple of times and said the drive had somekind of non repairable error. This is possibly something to do with the above. Clone dvd does not even see it, I have to browse and choose, then it says it has css protection.
I have looked for firmware/drivers for the drive and have found none available for it.
I have removed the drive and boxed it up to bring back to the store.
Should I do an exchange, or get my money back and go buy a different drive from elseware.
Currently I am using a Sony dual rw, dual layer external with my laptop, I want an internal for one of my desktops since it will have more memory, and a bigger HD. Hope this makes since.
Thanks
Wildrat,
Beige Computer, with a couple of buttons.
This message has been edited since posting. Last time this message was edited on 7. April 2006 @ 02:52
|
Member
|
7. April 2006 @ 03:25 |
Link to this message
|
|
It takes me about 25 to 35 mins to make a backup with clonedvd and anydvd,is that good or bad?
This message has been edited since posting. Last time this message was edited on 16. April 2006 @ 06:46
|
|
aabbccdd
Suspended permanently
|
7. April 2006 @ 10:09 |
Link to this message
|
wildrat i would exchange the drive looks like you have a bad on,if you do decide to get a different brand Plextor is tops BenQ is good also
nero thats a little long but in the ballpark depending on how much memory your have and your CPU it takes me about 11 to 12 mintues for shorter moives and 20 to 25 minites for longer movies with CloneDVD and AnyDVD but i have a really good machine per my sig
|
|
Advertisement
|
|
|
|
Wildrat
Suspended due to non-functional email address
|
7. April 2006 @ 10:25 |
Link to this message
|
|
I went back and exchanged the drive, the new drive is having the same problem with anydvd and clonedvd. I may go ahead and format my c drive and load xp from scratch and see if that cures the problem. I am having a couple of other issues also with a couple of other programs, like mailwasher and something else, can't remember right now. I see no reason for it not to work with anydvd and clonedvd, so I will just do a clean install of xp and go from there. I bought some +R media, which I am trying now after it just had another write error using clonedvd and -R media.
I said above with anydvd and clonedvd, it is having problems when other programs are used also.
It also had a write error with the new media.
Wildrat,
Beige Computer, with a couple of buttons.
This message has been edited since posting. Last time this message was edited on 7. April 2006 @ 11:29
|
